[PATCH V2 1/4] configs: imx8mn_beacon: Re-align memory to standard imx8mn settings

[Adam Ford]

The imx8mn_beacon board does not use the same memory map as the reference
design from NXP or other imx8mn boards.  As such, memory is more limited
in SPL.

Moving SPL_BSS_START_ADDR and SPL_STACK to default locations increases
the amount of available meory for the SPL stack.  Doing this allows
the board to no longer define CONFIG_MALLOC_F_ADDR.

Since SYS_LOAD_ADDR also does not align with other boards, move it too.

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2:
Rebase on u-boot-imx

Depends on:
https://patchwork.ozlabs.org/project/uboot/list/?series=324057
https://patchwork.ozlabs.org/project/uboot/list/?series=312020

diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig
index 613945a9ec..5708ba5c69 100644
--- a/configs/imx8mn_beacon_2g_defconfig
+++ b/configs/imx8mn_beacon_2g_defconfig
@@ -16,10 +16,9 @@ CONFIG_IMX8MN_BEACON_2GB_LPDDR=y
 CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_LTO=y
@@ -35,12 +34,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x95e000
+CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x187ff0
+CONFIG_SPL_STACK=0x980000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig
index cc1583524b..0793db0bd6 100644
--- a/configs/imx8mn_beacon_defconfig
+++ b/configs/imx8mn_beacon_defconfig
@@ -15,10 +15,9 @@ CONFIG_TARGET_IMX8MN_BEACON=y
 CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_LTO=y
@@ -34,12 +33,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x95e000
+CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x187ff0
+CONFIG_SPL_STACK=0x980000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig
index ecaefd8930..6da2182eb3 100644
--- a/configs/imx8mn_beacon_fspi_defconfig
+++ b/configs/imx8mn_beacon_fspi_defconfig
@@ -14,10 +14,9 @@ CONFIG_SPL_TEXT_BASE=0x912000
 CONFIG_TARGET_IMX8MN_BEACON=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_LTO=y
@@ -33,12 +32,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x95e000
+CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x187ff0
+CONFIG_SPL_STACK=0x980000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h
index 6faecbde77..930b11b75e 100644
--- a/include/configs/imx8mn_beacon.h
+++ b/include/configs/imx8mn_beacon.h
@@ -13,14 +13,6 @@
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#ifdef CONFIG_SPL_BUILD
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x184000
-
-/* For RAW image gives a error info not panic */
-
-#endif /* CONFIG_SPL_BUILD */
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"script=boot.scr\0" \
-- 
2.34.1