[PATCH v2 1/4] riscv: dts: Update memory configuration
Padmarao.Begari at microchip.com
Padmarao.Begari at microchip.com
Wed Oct 26 08:04:14 CEST 2022
On Sat, 2022-10-22 at 12:21 +0100, Conor Dooley wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> On Fri, Oct 21, 2022 at 12:29:19PM +0530, Padmarao Begari wrote:
> > In the v2022.10 Icicle reference design, the seg registers are
> > going to be
>
> Hey Padmarao,
> Since the release was done the other day I think that this should be
> s/are going to be/have been
>
Ok, will update same.
> > changed, resulting in a required change to the memory map.
> > A small 4MB reservation is made at the end of 32-bit DDR to provide
> > some
> > memory for the HSS to use, so that it can cache its payload between
> > reboots of a specific context.
> >
> > Co-developed-by: Conor Dooley <conor.dooley at microchip.com>
> > Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> > Signed-off-by: Padmarao Begari <padmarao.begari at microchip.com>
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > ---
> > arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 70 ++++----------
> > ------
> > 1 file changed, 14 insertions(+), 56 deletions(-)
> >
> > diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > index 287ef3d23b..876c475069 100644
> > --- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > +++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > @@ -1,6 +1,6 @@
> > // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > /*
> > - * Copyright (C) 2021 Microchip Technology Inc.
> > + * Copyright (C) 2021-2022 Microchip Technology Inc.
> > * Padmarao Begari <padmarao.begari at microchip.com>
> > */
> >
> > @@ -28,70 +28,28 @@
> > timebase-frequency = <RTCCLK_FREQ>;
> > };
>
> FWIW I think we should add the compatible that the linux dt has,
> signifying that this memory layout is compatible with the v2022.10
> release and later (w/ appropriate line-wrapping ofc):
> compatible = "microchip,mpfs-icicle-reference-rtlv2210",
> "microchip,mpfs-icicle-kit", "microchip,mpfs";
>
Ok, will add compatible "microchip,mpfs-icicle-reference-rtlv2210"
Regards
Padmarao
> Other than that:
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>
> > - reserved-memory {
> > - ranges;
> > - #size-cells = <2>;
> > - #address-cells = <2>;
> > -
> > - fabricbuf0: fabricbuf at 0 {
> > - compatible = "shared-dma-pool";
> > - reg = <0x0 0xae000000 0x0 0x2000000>;
> > - label = "fabricbuf0-ddr-c";
> > - };
> > -
> > - fabricbuf1: fabricbuf at 1 {
> > - compatible = "shared-dma-pool";
> > - reg = <0x0 0xc0000000 0x0 0x8000000>;
> > - label = "fabricbuf1-ddr-nc";
> > - };
> > -
> > - fabricbuf2: fabricbuf at 2 {
> > - compatible = "shared-dma-pool";
> > - reg = <0x0 0xd8000000 0x0 0x8000000>;
> > - label = "fabricbuf2-ddr-nc-wcb";
> > - };
> > - };
> > -
> > - udmabuf0 {
> > - compatible = "ikwzm,u-dma-buf";
> > - device-name = "udmabuf-ddr-c0";
> > - minor-number = <0>;
> > - size = <0x0 0x2000000>;
> > - memory-region = <&fabricbuf0>;
> > - sync-mode = <3>;
> > - };
> > -
> > - udmabuf1 {
> > - compatible = "ikwzm,u-dma-buf";
> > - device-name = "udmabuf-ddr-nc0";
> > - minor-number = <1>;
> > - size = <0x0 0x8000000>;
> > - memory-region = <&fabricbuf1>;
> > - sync-mode = <3>;
> > - };
> > -
> > - udmabuf2 {
> > - compatible = "ikwzm,u-dma-buf";
> > - device-name = "udmabuf-ddr-nc-wcb0";
> > - minor-number = <2>;
> > - size = <0x0 0x8000000>;
> > - memory-region = <&fabricbuf2>;
> > - sync-mode = <3>;
> > - };
> > -
> > ddrc_cache_lo: memory at 80000000 {
> > device_type = "memory";
> > - reg = <0x0 0x80000000 0x0 0x2e000000>;
> > - clocks = <&clkcfg CLK_DDRC>;
> > + reg = <0x0 0x80000000 0x0 0x40000000>;
> > status = "okay";
> > };
> >
> > ddrc_cache_hi: memory at 1000000000 {
> > device_type = "memory";
> > - reg = <0x10 0x0 0x0 0x40000000>;
> > - clocks = <&clkcfg CLK_DDRC>;
> > + reg = <0x10 0x40000000 0x0 0x40000000>;
> > status = "okay";
> > };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + hss_payload: region at BFC00000 {
> > + reg = <0x0 0xBFC00000 0x0 0x400000>;
> > + no-map;
> > + };
> > + };
> > };
> >
> > &uart1 {
> > --
> > 2.25.1
> >
More information about the U-Boot
mailing list