[PATCH v2 1/4] riscv: dts: Update memory configuration

[Padmarao.Begari at microchip.com]

Hi Conor,

> On Tue, 2022-10-25 at 19:50 +0000, Conor Dooley - M52691 wrote:
> On 22/10/2022 12:21, Conor Dooley wrote:
> > 
> > On Fri, Oct 21, 2022 at 12:29:19PM +0530, Padmarao Begari wrote:
> > > In the v2022.10 Icicle reference design, the seg registers are
> > > going to be
> > 
> > Hey Padmarao,
> > Since the release was done the other day I think that this should
> > be
> > s/are going to be/have been
> > 
> > > changed, resulting in a required change to the memory map.
> > > A small 4MB reservation is made at the end of 32-bit DDR to
> > > provide some
> > > memory for the HSS to use, so that it can cache its payload
> > > between
> > > reboots of a specific context.
> > > 
> > > Co-developed-by: Conor Dooley <conor.dooley at microchip.com>
> > > Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> > > Signed-off-by: Padmarao Begari <padmarao.begari at microchip.com>
> > > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > > ---
> > >  arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 70 ++++--------
> > > --------
> > >  1 file changed, 14 insertions(+), 56 deletions(-)
> > > 
> > > diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > index 287ef3d23b..876c475069 100644
> > > --- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > +++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > @@ -1,6 +1,6 @@
> > >  // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > >  /*
> > > - * Copyright (C) 2021 Microchip Technology Inc.
> > > + * Copyright (C) 2021-2022 Microchip Technology Inc.
> > >   * Padmarao Begari <padmarao.begari at microchip.com>
> > >   */
> > > 
> > > @@ -28,70 +28,28 @@
> > >               timebase-frequency = <RTCCLK_FREQ>;
> > >       };
> > 
> > FWIW I think we should add the compatible that the linux dt has,
> > signifying that this memory layout is compatible with the v2022.10
> > release and later (w/ appropriate line-wrapping ofc):
> > compatible = "microchip,mpfs-icicle-reference-rtlv2210",
> > "microchip,mpfs-icicle-kit", "microchip,mpfs";
> > 
> > Other than that:
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > 
> > > -     reserved-memory {
> > > -             ranges;
> > > -             #size-cells = <2>;
> > > -             #address-cells = <2>;
> > > -
> > > -             fabricbuf0: fabricbuf at 0 {
> > > -                     compatible = "shared-dma-pool";
> > > -                     reg = <0x0 0xae000000 0x0 0x2000000>;
> > > -                     label = "fabricbuf0-ddr-c";
> > > -             };
> > > -
> > > -             fabricbuf1: fabricbuf at 1 {
> > > -                     compatible = "shared-dma-pool";
> > > -                     reg = <0x0 0xc0000000 0x0 0x8000000>;
> > > -                     label = "fabricbuf1-ddr-nc";
> > > -             };
> > > -
> > > -             fabricbuf2: fabricbuf at 2 {
> > > -                     compatible = "shared-dma-pool";
> > > -                     reg = <0x0 0xd8000000 0x0 0x8000000>;
> > > -                     label = "fabricbuf2-ddr-nc-wcb";
> > > -             };
> > > -     };
> > > -
> > > -     udmabuf0 {
> > > -             compatible = "ikwzm,u-dma-buf";
> > > -             device-name = "udmabuf-ddr-c0";
> > > -             minor-number = <0>;
> > > -             size = <0x0 0x2000000>;
> > > -             memory-region = <&fabricbuf0>;
> > > -             sync-mode = <3>;
> > > -     };
> > > -
> > > -     udmabuf1 {
> > > -             compatible = "ikwzm,u-dma-buf";
> > > -             device-name = "udmabuf-ddr-nc0";
> > > -             minor-number = <1>;
> > > -             size = <0x0 0x8000000>;
> > > -             memory-region = <&fabricbuf1>;
> > > -             sync-mode = <3>;
> > > -     };
> > > -
> > > -     udmabuf2 {
> > > -             compatible = "ikwzm,u-dma-buf";
> > > -             device-name = "udmabuf-ddr-nc-wcb0";
> > > -             minor-number = <2>;
> > > -             size = <0x0 0x8000000>;
> > > -             memory-region = <&fabricbuf2>;
> > > -             sync-mode = <3>;
> > > -     };
> > > -
> > >       ddrc_cache_lo: memory at 80000000 {
> > >               device_type = "memory";
> > > -             reg = <0x0 0x80000000 0x0 0x2e000000>;
> > > -             clocks = <&clkcfg CLK_DDRC>;
> > > +             reg = <0x0 0x80000000 0x0 0x40000000>;
> > >               status = "okay";
> > >       };
> > > 
> > >       ddrc_cache_hi: memory at 1000000000 {
> 
> Sorry for not noticing prior, but this should bee changed too to
> match
> the reg property shouldn't it..
> 
Yes, will update same.

Regards
Padmarao
> > >               device_type = "memory";
> > > -             reg = <0x10 0x0 0x0 0x40000000>;
> > > -             clocks = <&clkcfg CLK_DDRC>;
> > > +             reg = <0x10 0x40000000 0x0 0x40000000>;
> > >               status = "okay";
> > >       };
> > > +
> > > +     reserved-memory {
> > > +             #address-cells = <2>;
> > > +             #size-cells = <2>;
> > > +             ranges;
> > > +
> > > +             hss_payload: region at BFC00000 {
> > > +                     reg = <0x0 0xBFC00000 0x0 0x400000>;
> > > +                     no-map;
> > > +             };
> > > +     };
> > >  };
> > > 
> > >  &uart1 {
> > > --
> > > 2.25.1
> > >