[PATCH v1] imx: imx8qm: imx8qm_mek switch to binman

[Peng Fan]

On 10/26/2022 4:09 PM, Oliver Graute wrote:
> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> ---
>   arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++
>   arch/arm/mach-imx/imx8/Kconfig          | 1 +
>   board/freescale/imx8qm_mek/README       | 2 +-
>   board/freescale/imx8qm_mek/imximage.cfg | 2 +-
>   configs/imx8qm_mek_defconfig            | 2 ++
>   5 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> index a95209e141..eefdccf992 100644
> --- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> +++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> @@ -3,6 +3,8 @@
>    * Copyright 2018, 2021 NXP
>    */
>   
> +#include "imx8qm-u-boot.dtsi"
> +

I think the build system would automatically include this.
Please correct if I am wrong.

>   &{/imx8qm-pm} {
>   
>   	u-boot,dm-spl;
> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
> index 23a7fcf361..4ccbabf506 100644
> --- a/arch/arm/mach-imx/imx8/Kconfig
> +++ b/arch/arm/mach-imx/imx8/Kconfig
> @@ -68,6 +68,7 @@ config TARGET_GIEDI
>   
>   config TARGET_IMX8QM_MEK
>   	bool "Support i.MX8QM MEK board"
> +	select BINMAN
>   	select BOARD_LATE_INIT
>   	select IMX8QM
>   	select FSL_CAAM
> diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
> index 570ed7e210..b1a4c6cc82 100644
> --- a/board/freescale/imx8qm_mek/README
> +++ b/board/freescale/imx8qm_mek/README
> @@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder:
>   Build U-Boot
>   ============
>   $ make imx8qm_mek_defconfig
> -$ make flash.bin
> +$ make
>   
>   Flash the binary into the SD card
>   =================================
> diff --git a/board/freescale/imx8qm_mek/imximage.cfg b/board/freescale/imx8qm_mek/imximage.cfg
> index 71612678c9..46ca3bf817 100644
> --- a/board/freescale/imx8qm_mek/imximage.cfg
> +++ b/board/freescale/imx8qm_mek/imximage.cfg
> @@ -5,7 +5,7 @@
>   
>   
>   /* Boot from SD, sector size 0x400 */
> -BOOT_FROM SD 0x400
> +BOOT_FROM	sd

Why update this?

>   /* SoC type IMX8QM */
>   SOC_TYPE IMX8QM
>   /* Append seco container image */
> diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
> index b973b809be..25b51cf1ec 100644
> --- a/configs/imx8qm_mek_defconfig
> +++ b/configs/imx8qm_mek_defconfig
> @@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>   CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
>   CONFIG_REMAKE_ELF=y
> +CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
>   CONFIG_OF_BOARD_SETUP=y
>   CONFIG_OF_SYSTEM_SETUP=y
>   CONFIG_BOOTDELAY=3

Regards,
Peng.