[PATCH v1] imx: imx8qm: imx8qm_mek switch to binman

[Oliver Graute]

On 26/10/22, Peng Fan wrote:
> 
> 
> On 10/26/2022 4:09 PM, Oliver Graute wrote:
> > Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> > ---
> >   arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++
> >   arch/arm/mach-imx/imx8/Kconfig          | 1 +
> >   board/freescale/imx8qm_mek/README       | 2 +-
> >   board/freescale/imx8qm_mek/imximage.cfg | 2 +-
> >   configs/imx8qm_mek_defconfig            | 2 ++
> >   5 files changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> > index a95209e141..eefdccf992 100644
> > --- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> > +++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
> > @@ -3,6 +3,8 @@
> >    * Copyright 2018, 2021 NXP
> >    */
> > +#include "imx8qm-u-boot.dtsi"
> > +
> 
> I think the build system would automatically include this.
> Please correct if I am wrong.

That's not the case if I remove the include I run into following error:

make[1]: Für das Ziel „SPL“ ist nichts zu tun.
  BINMAN  all
binman: Device tree 'u-boot.dtb' does not have a 'binman' node
Makefile:1109: recipe for target 'all' failed
make: *** [all] Error 1
> 
> >   &{/imx8qm-pm} {
> >   	u-boot,dm-spl;
> > diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
> > index 23a7fcf361..4ccbabf506 100644
> > --- a/arch/arm/mach-imx/imx8/Kconfig
> > +++ b/arch/arm/mach-imx/imx8/Kconfig
> > @@ -68,6 +68,7 @@ config TARGET_GIEDI
> >   config TARGET_IMX8QM_MEK
> >   	bool "Support i.MX8QM MEK board"
> > +	select BINMAN
> >   	select BOARD_LATE_INIT
> >   	select IMX8QM
> >   	select FSL_CAAM
> > diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
> > index 570ed7e210..b1a4c6cc82 100644
> > --- a/board/freescale/imx8qm_mek/README
> > +++ b/board/freescale/imx8qm_mek/README
> > @@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder:
> >   Build U-Boot
> >   ============
> >   $ make imx8qm_mek_defconfig
> > -$ make flash.bin
> > +$ make
> >   Flash the binary into the SD card
> >   =================================
> > diff --git a/board/freescale/imx8qm_mek/imximage.cfg b/board/freescale/imx8qm_mek/imximage.cfg
> > index 71612678c9..46ca3bf817 100644
> > --- a/board/freescale/imx8qm_mek/imximage.cfg
> > +++ b/board/freescale/imx8qm_mek/imximage.cfg
> > @@ -5,7 +5,7 @@
> >   /* Boot from SD, sector size 0x400 */
> > -BOOT_FROM SD 0x400
> > +BOOT_FROM	sd
> 
> Why update this?

you are right its unneccessary, will fix it in v2
> 
> >   /* SoC type IMX8QM */
> >   SOC_TYPE IMX8QM
> >   /* Append seco container image */
> > diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
> > index b973b809be..25b51cf1ec 100644
> > --- a/configs/imx8qm_mek_defconfig
> > +++ b/configs/imx8qm_mek_defconfig
> > @@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
> >   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> >   CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
> >   CONFIG_REMAKE_ELF=y
> > +CONFIG_FIT=y
> > +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> >   CONFIG_OF_BOARD_SETUP=y
> >   CONFIG_OF_SYSTEM_SETUP=y
> >   CONFIG_BOOTDELAY=3
> 
> Regards,
> Peng.

Best Regards,

Oliver