[PATCH v1 0/2] serial_mxc: fixing reception

[Pali Rohár]

On Monday 05 September 2022 09:12:49 ZHIZHIKIN Andrey wrote:
> Hello Pali,
> 
> > -----Original Message-----
> > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pali Rohar
> > Sent: Monday, September 5, 2022 10:59 AM
> > To: u-boot at lists.denx.de
> > Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception
> > 
> > On Monday 05 September 2022 10:53:58 Johannes Schneider wrote:
> > > while writing to a imx-serial device is probably thoroughly tested - and
> > obviosly works for the debug-serial - using a serial driver to read data received
> > over the serial interface does not work reliably.
> > >
> > > the patches in this series address issues found during the implementation of a
> > custom uboot-command to query a coprocessor, connected to an imx8mm over uart4,
> > for mainboard-identification strings
> > >
> > >
> > > Johannes Schneider (2):
> > >   serial: mxc: enable the RX pipeline
> > >   serial: mxc: have putc use the TXFIFO
> > >
> > >  drivers/serial/serial_mxc.c | 13 ++++++++++++-
> > >  1 file changed, 12 insertions(+), 1 deletion(-)
> > 
> > Hello! I'm really not maintainer of mxc and I do not have time to review
> > those patches. So please do not send me them as I'm spammed with tons of
> > unrelated emails/patches.
> 
> Then there is a problem with having your name as a maintainer for this file.
> 
> If I execute:
> $ ./scripts/get_maintainer.pl drivers/serial/serial_mxc.c
> "Pali Rohár" <pali at kernel.org> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:2/2=100%,removed_lines:2/2=100%)
> u-boot at lists.denx.de (open list)
> 
> I guess this has to be corrected then, right?
> 
> Regards,
> Andrey

Yes, please correct it. I have not added myself to the list of mxc
maintainers and I a really do not have time for reviewing mxc patches.