[PATCH v1 0/2] serial_mxc: fixing reception

[ZHIZHIKIN Andrey]

Hello Pali,

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pali Rohar
> Sent: Monday, September 5, 2022 11:14 AM
> To: ZHIZHIKIN Andrey <andrey.zhizhikin at leica-geosystems.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception
> 
> On Monday 05 September 2022 09:12:49 ZHIZHIKIN Andrey wrote:
> > Hello Pali,
> >
> > > -----Original Message-----
> > > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pali Rohar
> > > Sent: Monday, September 5, 2022 10:59 AM
> > > To: u-boot at lists.denx.de
> > > Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception
> > >
> > > On Monday 05 September 2022 10:53:58 Johannes Schneider wrote:
> > > > while writing to a imx-serial device is probably thoroughly tested - and
> > > obviosly works for the debug-serial - using a serial driver to read data
> received
> > > over the serial interface does not work reliably.
> > > >
> > > > the patches in this series address issues found during the implementation
> of a
> > > custom uboot-command to query a coprocessor, connected to an imx8mm over
> uart4,
> > > for mainboard-identification strings
> > > >
> > > >
> > > > Johannes Schneider (2):
> > > >   serial: mxc: enable the RX pipeline
> > > >   serial: mxc: have putc use the TXFIFO
> > > >
> > > >  drivers/serial/serial_mxc.c | 13 ++++++++++++-
> > > >  1 file changed, 12 insertions(+), 1 deletion(-)
> > >
> > > Hello! I'm really not maintainer of mxc and I do not have time to review
> > > those patches. So please do not send me them as I'm spammed with tons of
> > > unrelated emails/patches.
> >
> > Then there is a problem with having your name as a maintainer for this file.
> >
> > If I execute:
> > $ ./scripts/get_maintainer.pl drivers/serial/serial_mxc.c
> > "Pali Rohár" <pali at kernel.org>
> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:2/2=100%,removed_lines:2/2=
> 100%)
> > u-boot at lists.denx.de (open list)
> >
> > I guess this has to be corrected then, right?
> >
> > Regards,
> > Andrey
> 
> Yes, please correct it. I have not added myself to the list of mxc
> maintainers and I a really do not have time for reviewing mxc patches.

I cannot modify this part since removing you from maintainer list would
require a transfer of maintainership of this component to another name,
which I do not know.

I've Cc:'d Tom and people from imx world here so they can make a decision
on who shall continue the maintenance of this file when your entry is removed.

-- andrey