[PATCH v2 0/6] net: fm: Verify Fman microcode

[Peng Fan]

On 4/23/2022 1:38 AM, Sean Anderson wrote:
> Surprisingly, Fman microcode does not seem to be verified. This series
> aims to rectify this by introducing an optional FIT wrapper. This
> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not
> use this config, so the microcode will remain unverified for them. This
> is OK, since we do not want to break existing systems.
> 
> This series depends on [1]. There is no logical dependency, but they
> modify adjacent #includes, so the past patch will not apply cleanly
> unless that series is applied.
> 
> [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/
> 
> Changes in v2:
> - Document helpers
> - Split off Fman microcode verification patches into their own series
> - Split helper refactoring into a patch adding the helpers and one patch
>    per subsystem.
> 
> Sean Anderson (6):
>    ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME
>    image: fit: Add some helpers for getting data
>    ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop
>    cmd: fpga: Convert to use fit_get_data_node
>    net: Convert fit verification to use fit_get_data_*
>    net: fm: Add support for FIT firmware

Patch 6 failed to apply, could you please rebase?

Thanks,
Peng.

> 
>   arch/arm/cpu/armv8/sec_firmware.c  | 52 ++--------------------
>   boot/image-fit.c                   | 37 ++++++++++++++++
>   cmd/fpga.c                         | 24 +++-------
>   drivers/net/fm/fm.c                | 18 ++++++++
>   drivers/net/fsl-mc/mc.c            | 30 ++-----------
>   drivers/net/pfe_eth/pfe_firmware.c | 40 +----------------
>   include/image.h                    | 70 ++++++++++++++++++++++++++++++
>   7 files changed, 139 insertions(+), 132 deletions(-)
>