[PATCH v2 0/6] net: fm: Verify Fman microcode

[Sean Anderson]

On 9/6/22 1:22 AM, Peng Fan wrote:
> 
> 
> On 4/23/2022 1:38 AM, Sean Anderson wrote:
>> Surprisingly, Fman microcode does not seem to be verified. This series
>> aims to rectify this by introducing an optional FIT wrapper. This
>> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not
>> use this config, so the microcode will remain unverified for them. This
>> is OK, since we do not want to break existing systems.
>>
>> This series depends on [1]. There is no logical dependency, but they
>> modify adjacent #includes, so the past patch will not apply cleanly
>> unless that series is applied.
>>
>> [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/
>>
>> Changes in v2:
>> - Document helpers
>> - Split off Fman microcode verification patches into their own series
>> - Split helper refactoring into a patch adding the helpers and one patch
>>    per subsystem.
>>
>> Sean Anderson (6):
>>    ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME
>>    image: fit: Add some helpers for getting data
>>    ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop
>>    cmd: fpga: Convert to use fit_get_data_node
>>    net: Convert fit verification to use fit_get_data_*
>>    net: fm: Add support for FIT firmware
> 
> Patch 6 failed to apply, could you please rebase?

Please try [1].

--Sean

[1] https://lore.kernel.org/u-boot/20220816151607.1569660-1-sean.anderson@seco.com/#t