[PATCH v2 0/6] net: fm: Verify Fman microcode

[Peng Fan]

Hi Sean,

On 9/6/2022 11:27 PM, Sean Anderson wrote:
> 
> 
> On 9/6/22 1:22 AM, Peng Fan wrote:
>>
>>
>> On 4/23/2022 1:38 AM, Sean Anderson wrote:
>>> Surprisingly, Fman microcode does not seem to be verified. This series
>>> aims to rectify this by introducing an optional FIT wrapper. This
>>> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not
>>> use this config, so the microcode will remain unverified for them. This
>>> is OK, since we do not want to break existing systems.
>>>
>>> This series depends on [1]. There is no logical dependency, but they
>>> modify adjacent #includes, so the past patch will not apply cleanly
>>> unless that series is applied.
>>>
>>> [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/
>>>
>>> Changes in v2:
>>> - Document helpers
>>> - Split off Fman microcode verification patches into their own series
>>> - Split helper refactoring into a patch adding the helpers and one patch
>>>     per subsystem.
>>>
>>> Sean Anderson (6):
>>>     ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME
>>>     image: fit: Add some helpers for getting data
>>>     ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop
>>>     cmd: fpga: Convert to use fit_get_data_node
>>>     net: Convert fit verification to use fit_get_data_*
>>>     net: fm: Add support for FIT firmware
>>
>> Patch 6 failed to apply, could you please rebase?
> 
> Please try [1].
> 
> --Sean
> 
> [1] https://lore.kernel.org/u-boot/20220816151607.1569660-1-sean.anderson@seco.com/#t

➜  u-boot git:(fsl-qoriq-master) ✗ pwclient git-am 1666898 1666901 
1666900 1666903 1666902 1666904
Applying patch #1666898 using 'git am'
Description: [RESEND,v2,1/6] ARMv8/sec_firmware: Remove 
SEC_FIRMWARE_FIT_CNF_NAME
Applying: ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME
Applying patch #1666901 using 'git am'
Description: [RESEND,v2,2/6] image: fit: Add some helpers for getting data
Applying: image: fit: Add some helpers for getting data
Applying patch #1666900 using 'git am'
Description: [RESEND,v2,3/6] ARMv8/sec_firmware: Convert to use 
fit_get_data_conf_prop
Applying: ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop
Applying patch #1666903 using 'git am'
Description: [RESEND,v2,4/6] cmd: fpga: Convert to use fit_get_data_node
Applying: cmd: fpga: Convert to use fit_get_data_node
Applying patch #1666902 using 'git am'
Description: [RESEND,v2,5/6] net: Convert fit verification to use 
fit_get_data_*
Applying: net: Convert fit verification to use fit_get_data_*
Applying patch #1666904 using 'git am'
Description: [RESEND,v2,6/6] net: fm: Add support for FIT firmware
Applying: net: fm: Add support for FIT firmware
error: patch failed: drivers/net/fm/fm.c:6
error: drivers/net/fm/fm.c: patch does not apply
Patch failed at 0001 net: fm: Add support for FIT firmware
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
'git am' failed with exit status 128

Thanks,
Peng.