[PATCH 4/8] arch: arm: dts: HSD #1508104447-6: arm: dts: socfpga: stratix10: Add NAND board file

Jit Loon Lim jit.loon.lim at intel.com
Sun Sep 11 18:10:28 CEST 2022


From: Ley Foon Tan <ley.foon.tan at intel.com>

Copied from Linux commit ID 3c0f3b8545e7 ("arm64: dts: add NAND board files
for Stratix10 and Agilex")

The Stratix10 devkit supports a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card thus requires a separate board dts file.

Add flash0 label to QSPI node to reference it in other dts file later.

Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim at intel.com>
---
 arch/arm/dts/socfpga_stratix10_socdk_nand.dts | 223 ++++++++++++++++++
 1 file changed, 223 insertions(+)
 create mode 100644 arch/arm/dts/socfpga_stratix10_socdk_nand.dts

diff --git a/arch/arm/dts/socfpga_stratix10_socdk_nand.dts b/arch/arm/dts/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 0000000000..ef3044b3ae
--- /dev/null
+++ b/arch/arm/dts/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+
+		eccmgr {
+			sdmmca-ecc at ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy at 0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+
+		partition at 200000 {
+			label = "env";
+			reg = <0x200000 0x40000>;
+		};
+
+		partition at 240000 {
+			label = "dtb";
+			reg = <0x240000 0x40000>;
+		};
+
+		partition at 280000 {
+			label = "kernel";
+			reg = <0x280000 0x2000000>;
+		};
+
+		partition at 2280000 {
+			label = "misc";
+			reg = <0x2280000 0x2000000>;
+		};
+
+		partition at 4280000 {
+			label = "rootfs";
+			reg = <0x4280000 0x3bd80000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+
+	adc at 14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp at 4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom at 51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc at 68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	flash0: flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition at 0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x034B0000>;
+			};
+
+			qspi_rootfs: partition at 4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x034B0000 0x0EB50000>;
+			};
+		};
+	};
+};
-- 
2.26.2



More information about the U-Boot mailing list