[PATCH 2/4] ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init()

[Marek Vasut]

The current implementation of spl_board_init() is not correct,
the MX8MM BootROM v1 does not support SDP load when re-entered
from U-Boot SPL, it is up to U-Boot to perform the next stage
load using its own internal CI gadget driver and SDP protocol
implementation. Drop the spl_board_init() to let SPL continue
with normal load in case the SDP support is enabled.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Teresa Remmet <t.remmet at phytec.de>
---
 board/phytec/phycore_imx8mm/spl.c | 10 ----------
 configs/phycore-imx8mm_defconfig  |  1 -
 2 files changed, 11 deletions(-)

diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index d87ab6d4497..1bae9b1170d 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -42,16 +42,6 @@ static void spl_dram_init(void)
 	ddr_init(&dram_timing);
 }
 
-void spl_board_init(void)
-{
-	/* Serial download mode */
-	if (is_usb_boot()) {
-		puts("Back to ROM, SDP\n");
-		restore_boot_params();
-	}
-	puts("Normal Boot\n");
-}
-
 int board_fit_config_name_match(const char *name)
 {
 	return 0;
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 9b8c09a73ab..e8d7905bb4a 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -30,7 +30,6 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK=0x920000
 CONFIG_SYS_SPL_MALLOC=y
-- 
2.35.1