[PATCH 2/4] ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init()

[Peng Fan]

On 9/20/2022 3:41 AM, Marek Vasut wrote:
> The current implementation of spl_board_init() is not correct,
> the MX8MM BootROM v1 does not support SDP load when re-entered
> from U-Boot SPL, it is up to U-Boot to perform the next stage
> load using its own internal CI gadget driver and SDP protocol
> implementation. Drop the spl_board_init() to let SPL continue
> with normal load in case the SDP support is enabled.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> ---
> Cc: Fabio Estevam <festevam at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Teresa Remmet <t.remmet at phytec.de>
> ---
>   board/phytec/phycore_imx8mm/spl.c | 10 ----------
>   configs/phycore-imx8mm_defconfig  |  1 -
>   2 files changed, 11 deletions(-)
> 
> diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
> index d87ab6d4497..1bae9b1170d 100644
> --- a/board/phytec/phycore_imx8mm/spl.c
> +++ b/board/phytec/phycore_imx8mm/spl.c
> @@ -42,16 +42,6 @@ static void spl_dram_init(void)
>   	ddr_init(&dram_timing);
>   }
>   
> -void spl_board_init(void)
> -{
> -	/* Serial download mode */
> -	if (is_usb_boot()) {
> -		puts("Back to ROM, SDP\n");
> -		restore_boot_params();
> -	}
> -	puts("Normal Boot\n");
> -}
> -
>   int board_fit_config_name_match(const char *name)
>   {
>   	return 0;
> diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
> index 9b8c09a73ab..e8d7905bb4a 100644
> --- a/configs/phycore-imx8mm_defconfig
> +++ b/configs/phycore-imx8mm_defconfig
> @@ -30,7 +30,6 @@ CONFIG_BOARD_LATE_INIT=y
>   CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>   CONFIG_SPL_BSS_START_ADDR=0x910000
>   CONFIG_SPL_BSS_MAX_SIZE=0x2000
> -CONFIG_SPL_BOARD_INIT=y
>   # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>   CONFIG_SPL_STACK=0x920000
>   CONFIG_SYS_SPL_MALLOC=y