[PATCH v2 26/28] ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier

[Kever Yang]

Hi Jagan,

On 2022/8/18 22:52, Jagan Teki wrote:
> Edge Compute Module 0 Carrier is an industrial form factor evaluation
> board from Edgeble AI.
>
> General features:
> - microSD slot
> - 2x MIPI CSI2 connectors
> - MIPI DSI connector
> - 2x USB Host
> - 1x USB OTG
> - Ethernet
> - mini PCIe
> - Onboard PoE
> - RS485, RS232, CAN
> - Micro Phone array
> - Speaker
> - RTC battery slot
> - 40-pin expansion
>
> Edge Compute Module 0 needs to mount on top of this Carrier board for
> creating Edge Compute Module 0 Carrier platform.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan at edgeble.ai>

This patch can squash with previous patch 25/28 ?


Thanks,

- Kever

> ---
> Changes for v2:
> - none
>
>   arch/arm/dts/Makefile                        |  3 ++
>   arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts | 38 ++++++++++++++++++++
>   2 files changed, 41 insertions(+)
>   create mode 100644 arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 7fa275ea7c..2070eb1540 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -170,6 +170,9 @@ dtb-$(CONFIG_ROCKCHIP_RV1108) += \
>   	rv1108-elgin-r1.dtb \
>   	rv1108-evb.dtb
>   
> +dtb-$(CONFIG_ROCKCHIP_RV1126) += \
> +	rv1126-edgeble-ecm0-carrier.dtb
> +
>   dtb-$(CONFIG_ARCH_S5P4418) += \
>   	s5p4418-nanopi2.dtb
>   
> diff --git a/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts b/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts
> new file mode 100644
> index 0000000000..150bfb9bd0
> --- /dev/null
> +++ b/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rv1126.dtsi"
> +#include "rv1126-edgeble-edge-compute-module-0.dtsi"
> +
> +/ {
> +	model = "Edgeble AI Edge Compute Module 0 Carrier board";
> +	compatible = "edgeble,edge-compute-module-0-carrier",
> +		     "edgeble,edge-compute-module-0", "rockchip,rv1126";
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	card-detect-delay = <200>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
> +	rockchip,default-sample-phase = <90>;
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr104;
> +	vqmmc-supply = <&vccio_sd>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};