[PATCH] doc: ti: Add switch setting for boot modes on AM62 SK

[Tom Rini]

On Tue, Apr 04, 2023 at 03:59:56PM +0200, Heinrich Schuchardt wrote:
> On 3/31/23 22:36, Judith Mendez wrote:
> > List some common boot modes and their corresponding switch
> > settings for AM62 SK.
> > 
> > Signed-off-by: Judith Mendez <jm at ti.com>
> > ---
> > 
> > Changes from v1: Change table format from ascii-art to list-table
> > 
> >   doc/board/ti/am62x_sk.rst | 36 ++++++++++++++++++++++++++++++++++++
> >   1 file changed, 36 insertions(+)
> > 
> > diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
> > index b1b7d99befb..3d85400b1a1 100644
> > --- a/doc/board/ti/am62x_sk.rst
> > +++ b/doc/board/ti/am62x_sk.rst
> > @@ -229,3 +229,39 @@ Image formats:
> >                   | |   SPL DTB 1...N   | |
> >                   | +-------------------+ |
> >                   +-----------------------+
> > +
> > +Switch Setting for Boot Mode
> > +----------------------------
> > +
> > +Boot Mode pins provide means to select the boot mode and options before the
> > +device is powered up. After every POR, they are the main source to populate
> > +the Boot Parameter Tables.
> > +
> > +The following table shows some common boot modes used on AM62 platform. More
> > +details can be found in the Technical Reference Manual:
> > +https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
> > +
> > +.. list-table:: Boot Modes
> > +   :widths: 32 32 32
> > +   :header-rows: 1
> > +
> > +   * - Switch Label
> > +     - SW2: 12345678
> > +     - SW3: 12345678
> > +   * - SD
> > +     - 01000000
> > +     - 11000010
> > +   * - OSPI
> > +     - 00000000
> > +     - 11001110
> > +   * - EMMC
> > +     - 00000000
> > +     - 11010010
> > +   * - UART
> > +     - 00000000
> > +     - 11011100
> > +   * - USB DFU
> > +     - 00000000
> > +     - 11001010
> 
> Hello Judith,
> 
> ReStructured text allows different flavors of formatting tables.
> 
> The HTML output for the table above is correct but the .rst file is hard
> to read in a text-editor. I would prefer:
> 
> *Boot Modes*
> 
> ============ ============= =============
> Switch Label SW2: 12345678 SW3: 12345678
> ============ ============= =============
> SD           01000000      11000010
> OSPI         00000000      11001110
> EMMC         00000000      11010010
> UART         00000000      11011100
> USB DFU      00000000      11001010
> ============ ============= =============

There's other list-table entires in the docs today. I'm fine either way,
but we need to be consistent in the docs, and should update perhaps
doc/develop/codingstyle.rst should get a section too on docs?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230404/301526fe/attachment.sig>