[PATCH] doc: ti: Add switch setting for boot modes on AM62 SK

Mendez, Judith jm at ti.com
Thu Apr 6 19:54:33 CEST 2023


Hello,

On 4/4/2023 9:22 AM, Tom Rini wrote:
> On Tue, Apr 04, 2023 at 03:59:56PM +0200, Heinrich Schuchardt wrote:
>> On 3/31/23 22:36, Judith Mendez wrote:
>>> List some common boot modes and their corresponding switch
>>> settings for AM62 SK.
>>>
>>> Signed-off-by: Judith Mendez <jm at ti.com>
>>> ---
>>>
>>> Changes from v1: Change table format from ascii-art to list-table
>>>
>>>    doc/board/ti/am62x_sk.rst | 36 ++++++++++++++++++++++++++++++++++++
>>>    1 file changed, 36 insertions(+)
>>>
>>> diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
>>> index b1b7d99befb..3d85400b1a1 100644
>>> --- a/doc/board/ti/am62x_sk.rst
>>> +++ b/doc/board/ti/am62x_sk.rst
>>> @@ -229,3 +229,39 @@ Image formats:
>>>                    | |   SPL DTB 1...N   | |
>>>                    | +-------------------+ |
>>>                    +-----------------------+
>>> +
>>> +Switch Setting for Boot Mode
>>> +----------------------------
>>> +
>>> +Boot Mode pins provide means to select the boot mode and options before the
>>> +device is powered up. After every POR, they are the main source to populate
>>> +the Boot Parameter Tables.
>>> +
>>> +The following table shows some common boot modes used on AM62 platform. More
>>> +details can be found in the Technical Reference Manual:
>>> +https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
>>> +
>>> +.. list-table:: Boot Modes
>>> +   :widths: 32 32 32
>>> +   :header-rows: 1
>>> +
>>> +   * - Switch Label
>>> +     - SW2: 12345678
>>> +     - SW3: 12345678
>>> +   * - SD
>>> +     - 01000000
>>> +     - 11000010
>>> +   * - OSPI
>>> +     - 00000000
>>> +     - 11001110
>>> +   * - EMMC
>>> +     - 00000000
>>> +     - 11010010
>>> +   * - UART
>>> +     - 00000000
>>> +     - 11011100
>>> +   * - USB DFU
>>> +     - 00000000
>>> +     - 11001010
>>
>> Hello Judith,
>>
>> ReStructured text allows different flavors of formatting tables.
>>
>> The HTML output for the table above is correct but the .rst file is hard
>> to read in a text-editor. I would prefer:
>>
>> *Boot Modes*
>>
>> ============ ============= =============
>> Switch Label SW2: 12345678 SW3: 12345678
>> ============ ============= =============
>> SD           01000000      11000010
>> OSPI         00000000      11001110
>> EMMC         00000000      11010010
>> UART         00000000      11011100
>> USB DFU      00000000      11001010
>> ============ ============= =============
> 
> There's other list-table entires in the docs today. I'm fine either way,
> but we need to be consistent in the docs, and should update perhaps
> doc/develop/codingstyle.rst should get a section too on docs?
> 

I will send again with the ASCII-style so y'all have the option.

regards,
Judith


More information about the U-Boot mailing list