[PATCH] ARM: configs: imx8mm: Sync i.MX8M Mini Toradex Verdin and Menlo board configs

Marek Vasut marex at denx.de
Thu Apr 6 01:51:14 CEST 2023


Synchronize the i.MX8M Mini Toradex Verdin based Menlo board config
with i.MX8M Mini Toradex Verdin carrier board. This enables DM MDIO,
eMMC HS modes, TMU for thermal monitoring, LTO and multiple commands
(hexdump, pmic, read, time).

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Marek Vasut <marex at denx.de>
Cc: Olaf Mandel <o.mandel at menlosystems.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 configs/imx8mm-mx8menlo_defconfig | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig
index 0a374aab06d..0bd852a77b9 100644
--- a/configs/imx8mm-mx8menlo_defconfig
+++ b/configs/imx8mm-mx8menlo_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_MX8MENLO=y
 CONFIG_SYS_PROMPT="Verdin iMX8MM # "
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
@@ -24,6 +25,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
+CONFIG_LTO=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -61,18 +63,23 @@ CONFIG_SYS_PBSIZE=2081
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_BTRFS=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -87,7 +94,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_PART=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="FEC"
+CONFIG_ETHPRIME="eth0"
 CONFIG_VERSION_VARIABLE=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
@@ -104,11 +111,19 @@ CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_MDIO=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_SPL_PHY=y
@@ -131,6 +146,7 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_MXC_USB_OTG_HACTIVE=y
@@ -143,4 +159,4 @@ CONFIG_CI_UDC=y
 CONFIG_SDP_LOADADDR=0x40400000
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_IMX_WATCHDOG=y
-CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_HEXDUMP=y
-- 
2.39.2



More information about the U-Boot mailing list