[PATCH] ARM: configs: imx8mm: Sync i.MX8M Mini Toradex Verdin and Menlo board configs

[Peng Fan]

On 4/6/2023 7:51 AM, Marek Vasut wrote:
> Synchronize the i.MX8M Mini Toradex Verdin based Menlo board config
> with i.MX8M Mini Toradex Verdin carrier board. This enables DM MDIO,
> eMMC HS modes, TMU for thermal monitoring, LTO and multiple commands
> (hexdump, pmic, read, time).
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> ---
> Cc: Marek Vasut <marex at denx.de>
> Cc: Olaf Mandel <o.mandel at menlosystems.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
>   configs/imx8mm-mx8menlo_defconfig | 20 ++++++++++++++++++--
>   1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig
> index 0a374aab06d..0bd852a77b9 100644
> --- a/configs/imx8mm-mx8menlo_defconfig
> +++ b/configs/imx8mm-mx8menlo_defconfig
> @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo"
>   CONFIG_SPL_TEXT_BASE=0x7E1000
>   CONFIG_TARGET_IMX8MM_MX8MENLO=y
>   CONFIG_SYS_PROMPT="Verdin iMX8MM # "
> +CONFIG_OF_LIBFDT_OVERLAY=y
>   CONFIG_SPL_MMC=y
>   CONFIG_SPL_SERIAL=y
>   CONFIG_SPL_DRIVERS_MISC=y
> @@ -24,6 +25,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
>   CONFIG_SYS_LOAD_ADDR=0x40480000
>   CONFIG_SYS_MEMTEST_START=0x40000000
>   CONFIG_SYS_MEMTEST_END=0x80000000
> +CONFIG_LTO=y
>   CONFIG_SYS_MONITOR_LEN=524288
>   CONFIG_FIT=y
>   CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> @@ -61,18 +63,23 @@ CONFIG_SYS_PBSIZE=2081
>   CONFIG_CMD_ASKENV=y
>   # CONFIG_CMD_EXPORTENV is not set
>   # CONFIG_CMD_CRC32 is not set
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_MD5SUM_VERIFY=y
>   CONFIG_CMD_MEMTEST=y
>   CONFIG_CMD_CLK=y
>   CONFIG_CMD_FUSE=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_READ=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_USB_SDP=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
>   CONFIG_CMD_BOOTCOUNT=y
>   CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
>   CONFIG_CMD_UUID=y
> +CONFIG_CMD_PMIC=y
>   CONFIG_CMD_REGULATOR=y
>   CONFIG_CMD_BTRFS=y
>   CONFIG_CMD_EXT4_WRITE=y
> @@ -87,7 +94,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>   CONFIG_SYS_MMC_ENV_PART=1
>   CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>   CONFIG_USE_ETHPRIME=y
> -CONFIG_ETHPRIME="FEC"
> +CONFIG_ETHPRIME="eth0"
>   CONFIG_VERSION_VARIABLE=y
>   CONFIG_IP_DEFRAG=y
>   CONFIG_TFTP_BLOCKSIZE=4096
> @@ -104,11 +111,19 @@ CONFIG_DM_I2C=y
>   CONFIG_MISC=y
>   CONFIG_I2C_EEPROM=y
>   CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_SPL_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_SPL_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_SUPPORT=y
>   CONFIG_FSL_USDHC=y
>   CONFIG_PHYLIB=y
>   CONFIG_PHY_ADDR_ENABLE=y
>   CONFIG_PHY_MICREL=y
>   CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_MDIO=y
>   CONFIG_FEC_MXC=y
>   CONFIG_MII=y
>   CONFIG_SPL_PHY=y
> @@ -131,6 +146,7 @@ CONFIG_SPL_SYSRESET=y
>   CONFIG_SYSRESET_PSCI=y
>   CONFIG_SYSRESET_WATCHDOG=y
>   CONFIG_DM_THERMAL=y
> +CONFIG_IMX_TMU=y
>   CONFIG_USB=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_MXC_USB_OTG_HACTIVE=y
> @@ -143,4 +159,4 @@ CONFIG_CI_UDC=y
>   CONFIG_SDP_LOADADDR=0x40400000
>   CONFIG_USB_GADGET_DOWNLOAD=y
>   CONFIG_IMX_WATCHDOG=y
> -CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_HEXDUMP=y