[RESEND PATCH 1/3] imx6: clock: improve calculations to get the PLL video rate

[Dario Binacchi]

During some tests to check the pixel clock rate in the transition from
U-Boot to the Linux kernel, I noticed that with the same configuration
of the registers the debug messages reported different rates.

The same Linux kernel calculations are now used to get the PLL video
rate.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
Reviewed-by: Michael Trimarchi <michael at amarulasolutions.com>
---

 arch/arm/mach-imx/mx6/clock.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c
index cb9d629be408..17d8dcd5c841 100644
--- a/arch/arm/mach-imx/mx6/clock.c
+++ b/arch/arm/mach-imx/mx6/clock.c
@@ -213,6 +213,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num)
 static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 {
 	u32 div, test_div, pll_num, pll_denom;
+	u64 temp64;
 
 	switch (pll) {
 	case PLL_SYS:
@@ -272,7 +273,10 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 		}
 		test_div = 1 << (2 - test_div);
 
-		return infreq * (div + pll_num / pll_denom) / test_div;
+		temp64 = (u64)infreq;
+		temp64 *= pll_num;
+		do_div(temp64, pll_denom);
+		return infreq * div + (unsigned long)temp64;
 	default:
 		return 0;
 	}
-- 
2.32.0