[PATCH v3 06/19] x86: coreboot: Look for DBG2 UART in SPL too

[Simon Glass]

If coreboot does not set up sysinfo for the UART, SPL currently hangs.
Use the DBG2 teechnique there as well. This allows coreboot64 to boot from
coreboot even if the console info is missing from sysinfo

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 configs/coreboot64_defconfig | 1 +
 drivers/serial/Kconfig       | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig
index 602465175d20..a094a7c24234 100644
--- a/configs/coreboot64_defconfig
+++ b/configs/coreboot64_defconfig
@@ -55,4 +55,5 @@ CONFIG_SYS_64BIT_LBA=y
 CONFIG_SOUND=y
 CONFIG_SOUND_I8254=y
 CONFIG_CONSOLE_SCROLL_LINES=5
+CONFIG_SPL_ACPI=y
 # CONFIG_GZIP is not set
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a1e089962a91..01100b6d93f3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -672,7 +672,7 @@ config COREBOOT_SERIAL
 config COREBOOT_SERIAL_FROM_DBG2
 	bool "Obtain UART from ACPI tables"
 	depends on COREBOOT_SERIAL
-	default y if !SPL
+	default y
 	help
 	  Select this to try to find a DBG2 record in the ACPI tables, in the
 	  event that coreboot does not provide information about the UART in the
-- 
2.42.0.rc1.204.g551eb34607-goog