[PATCH v2] arm64: zynqmp: Add output-enable pins to SOMs

[Michal Simek]

From: Neal Frager <neal.frager at amd.com>

Now that the zynqmp pinctrl driver supports the tri-state registers, make
sure that the pins requiring output-enable are configured appropriately for
SOMs.

Without it, all tristate setting for MIOs, which are not related to SOM
itself, are using default configuration which is not correct setting.
It means SDs, USBs, ethernet, etc. are not working properly.

In past it was fixed through calling tristate configuration via bootcmd:
usb_init=mw 0xFF180208 2020
kv260_gem3=mw 0xFF18020C 0xFC0 && gpio toggle gpio at ff0a000038 && \
  gpio toggle gpio at ff0a000038

Signed-off-by: Neal Frager <neal.frager at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

Changes in v2:
- update commit message
- add also fixes for kr260-revB and kv260-revA/B

 arch/arm/dts/zynqmp-sck-kr-g-revA.dts | 6 ++++++
 arch/arm/dts/zynqmp-sck-kr-g-revB.dts | 6 ++++++
 arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 5 +++++
 arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 5 +++++
 4 files changed, 22 insertions(+)

diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
index d318773bd9d6..30a0230d4767 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
@@ -250,6 +250,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -301,6 +302,7 @@
 		conf-bootstrap {
 			pins = "MIO45", "MIO47", "MIO49";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -308,6 +310,7 @@
 			pins = "MIO38", "MIO39", "MIO40",
 				"MIO41", "MIO42", "MIO43";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -316,6 +319,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -346,6 +350,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
@@ -373,6 +378,7 @@
 			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
 			"MIO72", "MIO73", "MIO74", "MIO75";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
index 69dba0761b37..8f4c52d6d643 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
@@ -250,6 +250,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -301,6 +302,7 @@
 		conf-bootstrap {
 			pins = "MIO45", "MIO47", "MIO49";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -308,6 +310,7 @@
 			pins = "MIO38", "MIO39", "MIO40",
 				"MIO41", "MIO42", "MIO43";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -316,6 +319,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -346,6 +350,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
@@ -373,6 +378,7 @@
 			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
 			"MIO72", "MIO73", "MIO74", "MIO75";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index a81b3f6f51ad..55bef1df75d0 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -205,6 +205,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -256,6 +257,7 @@
 		conf-bootstrap {
 			pins = "MIO71", "MIO73", "MIO75";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -263,6 +265,7 @@
 			pins = "MIO64", "MIO65", "MIO66",
 				"MIO67", "MIO68", "MIO69";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -271,6 +274,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -301,6 +305,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index f935f25c887f..1b1d9e772f55 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -193,6 +193,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -244,6 +245,7 @@
 		conf-bootstrap {
 			pins = "MIO71", "MIO73", "MIO75";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -251,6 +253,7 @@
 			pins = "MIO64", "MIO65", "MIO66",
 				"MIO67", "MIO68", "MIO69";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -259,6 +262,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -289,6 +293,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
-- 
2.36.1