[PATCH] ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOM
Marek Vasut
marex at denx.de
Thu Aug 31 16:41:15 CEST 2023
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
configs/imx8mp_dhcom_pdk2_defconfig | 1 -
configs/imx8mp_dhcom_pdk3_defconfig | 1 -
2 files changed, 2 deletions(-)
diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index 14ac499e587..a920ffe09bf 100644
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -160,7 +160,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMX8MP=y
CONFIG_CLK_IMX8MP=y
-CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_DFU_TFTP=y
CONFIG_DFU_TIMEOUT=y
CONFIG_DFU_MMC=y
diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
index 3b26f315bba..9463456798e 100644
--- a/configs/imx8mp_dhcom_pdk3_defconfig
+++ b/configs/imx8mp_dhcom_pdk3_defconfig
@@ -161,7 +161,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMX8MP=y
CONFIG_CLK_IMX8MP=y
-CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_DFU_TFTP=y
CONFIG_DFU_TIMEOUT=y
CONFIG_DFU_MMC=y
--
2.40.1
More information about the U-Boot
mailing list