[PATCH 1/2] ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
Marek Vasut
marex at denx.de
Thu Aug 31 16:41:45 CEST 2023
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
configs/imx8mm_data_modul_edm_sbc_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index d457f1e3c36..2de336e564c 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -157,7 +157,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMX8MM=y
CONFIG_CLK_IMX8MM=y
-CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_DFU_TFTP=y
CONFIG_DFU_TIMEOUT=y
CONFIG_DFU_MMC=y
--
2.40.1
More information about the U-Boot
mailing list