[PATCH V5 10/12] doc: iot2050: Add a note about the watchdog firmware
Jan Kiszka
jan.kiszka at siemens.com
Fri Feb 3 13:26:39 CET 2023
From: Jan Kiszka <jan.kiszka at siemens.com>
This is enabled by default, thus should be described as well.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
doc/board/siemens/iot2050.rst | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index cb49a0e36bf..efe94a448a9 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -27,6 +27,10 @@ The following binaries from that source need to be present in the build folder:
- seboot_pg1.bin
- seboot_pg2.bin
+When using the watchdog, a related firmware for the R5 core(s) is needed, e.g.
+https://github.com/siemens/k3-rti-wdt. The name and location of the image is
+configured via CONFIG_WDT_K3_RTI_FW_FILE.
+
For building an image containing the OTP key provisioning data, below binary
needs to be present in the build folder:
--
2.35.3
More information about the U-Boot
mailing list