[PATCH] arm64: imx: Add support for imx8mp-beacon-kit

[Tom Rini]

On Sun, Feb 12, 2023 at 12:02:26PM -0600, Adam Ford wrote:
> On Sun, Feb 12, 2023 at 11:47 AM Tom Rini <trini at konsulko.com> wrote:
> >
> > On Sun, Feb 12, 2023 at 11:36:38AM -0600, Adam Ford wrote:
> >
> > > Beacon Embedded has an i.MX8M Plus development kit which consists
> > > of a SOM + baseboard.  The SOM includes Bluetooth, WiFi, QSPI, eMMC,
> > > and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
> > > Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
> > > PHY.  The device trees are already queued for inclusion in Linux 6.3.
> > >
> > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > [snip]
> > > diff --git a/board/beacon/imx8mp/README b/board/beacon/imx8mp/README
> > > new file mode 100644
> > > index 0000000000..47999bb038
> > > --- /dev/null
> > > +++ b/board/beacon/imx8mp/README
> >
> > Our rST docs have gotten to the point I think where we should say no to
> > new board README files, this belongs under doc/board/
> 
> OK.  I'll work on that.
> 
> >
> > [snip]
> > > +#define CFG_EXTRA_ENV_SETTINGS               \
> > > +     "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > > +     "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > > +     "image=Image\0" \
> > > +     "console=ttymxc1,115200\0" \
> > > +     "fdt_addr_r=0x43000000\0"                       \
> > > +     "fdt_addr=0x43000000\0"                 \
> > > +     "boot_fdt=try\0" \
> > > +     "boot_fit=no\0" \
> > > +     "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > > +     "bootm_size=0x10000000\0" \
> > > +     "mmcdev=1\0" \
> > > +     "mmcpart=1\0" \
> > > +     "optargs=audit=0 video=LVDS-1:d video=LVDS-2:d\0" \
> > > +     "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
> > > +     "mmcargs=setenv bootargs console=${console} " \
> > > +     " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
> > > +     "bootscript=echo Running bootscript from mmc ...; " \
> > > +             "source\0" \
> > > +     "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> > > +     "loadfdt=echo ${fdt_file}; fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdt_file}\0" \
> > > +     "mmcboot=echo Booting from mmc ...; " \
> > > +             "run finduuid; run mmcargs; " \
> > > +             "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
> > > +                     "bootm ${loadaddr}; " \
> > > +             "else " \
> > > +                     "if run loadfdt; then " \
> > > +                             "booti ${loadaddr} - ${fdt_addr_r}; " \
> > > +                     "else " \
> > > +                             "echo WARN: Cannot load the DT; " \
> > > +                     "fi; " \
> > > +             "fi;\0" \
> > > +     "netargs=setenv bootargs ${jh_clk} console=${console} " \
> > > +             "root=/dev/nfs " \
> > > +             "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> > > +     "netboot=echo Booting from net ...; " \
> > > +             "run netargs;  " \
> > > +             "if test ${ip_dyn} = yes; then " \
> > > +                     "setenv get_cmd dhcp; " \
> > > +             "else " \
> > > +                     "setenv get_cmd tftp; " \
> > > +             "fi; " \
> > > +             "${get_cmd} ${loadaddr} ${image}; " \
> > > +             "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
> > > +                     "bootm ${loadaddr}; " \
> > > +             "else " \
> > > +                     "if ${get_cmd} ${fdt_addr_r} ${fdt_file}; then " \
> > > +                             "booti ${loadaddr} - ${fdt_addr_r}; " \
> > > +                     "else " \
> > > +                             "echo WARN: Cannot load the DT; " \
> > > +                     "fi; " \
> > > +             "fi;\0"
> >
> > And this should all be plain text environment (see board/*/*/*.env for
> 
> I didn't even know this was a thing, but after reviewing what others
> are doing, I like this much better.

That's good to hear.

> > examples), and please put it somewhere on your TODO list to migrate
> > other platforms README and environments, thanks!
> 
> Is there a deadline?

Neither has a firm deadline at this point, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230212/27b171e4/attachment.sig>