[PATCH] arm64: imx: Add support for imx8mp-beacon-kit

Adam Ford aford173 at gmail.com
Mon Feb 13 16:01:27 CET 2023


On Sun, Feb 12, 2023 at 12:08 PM Tom Rini <trini at konsulko.com> wrote:
>
> On Sun, Feb 12, 2023 at 12:02:26PM -0600, Adam Ford wrote:
> > On Sun, Feb 12, 2023 at 11:47 AM Tom Rini <trini at konsulko.com> wrote:
> > >
> > > On Sun, Feb 12, 2023 at 11:36:38AM -0600, Adam Ford wrote:
> > >
> > > > Beacon Embedded has an i.MX8M Plus development kit which consists
> > > > of a SOM + baseboard.  The SOM includes Bluetooth, WiFi, QSPI, eMMC,
> > > > and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
> > > > Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
> > > > PHY.  The device trees are already queued for inclusion in Linux 6.3.
> > > >
> > > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > > [snip]
> > > > diff --git a/board/beacon/imx8mp/README b/board/beacon/imx8mp/README
> > > > new file mode 100644
> > > > index 0000000000..47999bb038
> > > > --- /dev/null
> > > > +++ b/board/beacon/imx8mp/README
> > >
> > > Our rST docs have gotten to the point I think where we should say no to
> > > new board README files, this belongs under doc/board/
> >
> > OK.  I'll work on that.
> >
> > >
> > > [snip]
> > > > +#define CFG_EXTRA_ENV_SETTINGS               \
> > > > +     "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > > > +     "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > > > +     "image=Image\0" \
> > > > +     "console=ttymxc1,115200\0" \
> > > > +     "fdt_addr_r=0x43000000\0"                       \
> > > > +     "fdt_addr=0x43000000\0"                 \
> > > > +     "boot_fdt=try\0" \
> > > > +     "boot_fit=no\0" \
> > > > +     "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > > > +     "bootm_size=0x10000000\0" \
> > > > +     "mmcdev=1\0" \
> > > > +     "mmcpart=1\0" \
> > > > +     "optargs=audit=0 video=LVDS-1:d video=LVDS-2:d\0" \
> > > > +     "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
> > > > +     "mmcargs=setenv bootargs console=${console} " \
> > > > +     " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
> > > > +     "bootscript=echo Running bootscript from mmc ...; " \
> > > > +             "source\0" \
> > > > +     "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> > > > +     "loadfdt=echo ${fdt_file}; fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdt_file}\0" \
> > > > +     "mmcboot=echo Booting from mmc ...; " \
> > > > +             "run finduuid; run mmcargs; " \
> > > > +             "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
> > > > +                     "bootm ${loadaddr}; " \
> > > > +             "else " \
> > > > +                     "if run loadfdt; then " \
> > > > +                             "booti ${loadaddr} - ${fdt_addr_r}; " \
> > > > +                     "else " \
> > > > +                             "echo WARN: Cannot load the DT; " \
> > > > +                     "fi; " \
> > > > +             "fi;\0" \
> > > > +     "netargs=setenv bootargs ${jh_clk} console=${console} " \
> > > > +             "root=/dev/nfs " \
> > > > +             "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> > > > +     "netboot=echo Booting from net ...; " \
> > > > +             "run netargs;  " \
> > > > +             "if test ${ip_dyn} = yes; then " \
> > > > +                     "setenv get_cmd dhcp; " \
> > > > +             "else " \
> > > > +                     "setenv get_cmd tftp; " \
> > > > +             "fi; " \
> > > > +             "${get_cmd} ${loadaddr} ${image}; " \
> > > > +             "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
> > > > +                     "bootm ${loadaddr}; " \
> > > > +             "else " \
> > > > +                     "if ${get_cmd} ${fdt_addr_r} ${fdt_file}; then " \
> > > > +                             "booti ${loadaddr} - ${fdt_addr_r}; " \
> > > > +                     "else " \
> > > > +                             "echo WARN: Cannot load the DT; " \
> > > > +                     "fi; " \
> > > > +             "fi;\0"
> > >
> > > And this should all be plain text environment (see board/*/*/*.env for
> >
> > I didn't even know this was a thing, but after reviewing what others
> > are doing, I like this much better.
>
> That's good to hear.
>
> > > examples), and please put it somewhere on your TODO list to migrate
> > > other platforms README and environments, thanks!
> >
> > Is there a deadline?
>
> Neither has a firm deadline at this point, thanks!

Tom,

I pushed a V2 and CC'd you.  If you're OK with both the env file and
the rst file for this board, I'll do the same thing for the other
Beacon and LogicPD boards.  I just don't want to do the work until I
know my first attempt at these new files is acceptable.

Thanks,

adam
>
> --
> Tom


More information about the U-Boot mailing list