[PATCH v2] cmd: pxe_utils: Limit fdtcontroladdr usage to non-fitImage

[Neil Armstrong]

On 14/12/2022 07:45, Marek Vasut wrote:
> Commit d5ba6188dfb ("cmd: pxe_utils: Check fdtcontroladdr in label_boot")
> forces '$fdtcontroladdr' DT address as a third parameter of bootm command
> even if the PXE transfer pulls in a fitImage which contains configuration
> node with its own DT that is preferrable to be passed to Linux. Limit the
> $fdtcontroladdr fallback utilization to non-fitImages, since it is highly
> likely a fitImage would come with its own DT, while single-file images do
> need a separate DT.
> 
> Fixes: d5ba6188dfb ("cmd: pxe_utils: Check fdtcontroladdr in label_boot")
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Peter Hoyes <Peter.Hoyes at arm.com>
> Cc: Ramon Fried <rfried.dev at gmail.com>
> Cc: Simon Glass <sjg at chromium.org>
> ---
> V1: Map the kernel buffer before testing image type
> V2: Update code comment to reflect the change
> ---
>   boot/pxe_utils.c | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c
> index 8133006875f..099aa2f4bc7 100644
> --- a/boot/pxe_utils.c
> +++ b/boot/pxe_utils.c
> @@ -617,7 +617,7 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
>   	 * bootm, and adjust argc appropriately.
>   	 *
>   	 * Scenario 3: If there is an fdtcontroladdr specified, pass it along to
> -	 * bootm, and adjust argc appropriately.
> +	 * bootm, and adjust argc appropriately, unless the image type is fitImage.
>   	 *
>   	 * Scenario 4: fdt blob is not available.
>   	 */
> @@ -724,7 +724,10 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
>   	if (!bootm_argv[3])
>   		bootm_argv[3] = env_get("fdt_addr");
>   
> -	if (!bootm_argv[3])
> +	kernel_addr_r = genimg_get_kernel_addr(kernel_addr);
> +	buf = map_sysmem(kernel_addr_r, 0);
> +
> +	if (!bootm_argv[3] && genimg_get_format(buf) != IMAGE_FORMAT_FIT)
>   		bootm_argv[3] = env_get("fdtcontroladdr");
>   
>   	if (bootm_argv[3]) {
> @@ -733,8 +736,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
>   		bootm_argc = 4;
>   	}
>   
> -	kernel_addr_r = genimg_get_kernel_addr(kernel_addr);
> -	buf = map_sysmem(kernel_addr_r, 0);
>   	/* Try bootm for legacy and FIT format image */
>   	if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID &&
>               IS_ENABLED(CONFIG_CMD_BOOTM))



Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>