[PATCH] clk: sunxi: Add an A31/A23/A33 legacy PRCM MFD driver
Sean Anderson
seanga2 at gmail.com
Wed Jan 4 18:33:59 CET 2023
On 11/18/22 23:47, Samuel Holland wrote:
> When the CCU binding and driver for the PRCM were written, it seems the
> intention was to convert the A31 and A23/A33 devicetrees to use them.
> However, that never happened, so those SoCs still use the old binding,
> with an MFD for the PRCM, and separate DT nodes for clocks and resets.
>
> The specifier in the legacy clock/reset bindings is the register bit
> offset, so the drivers are trivial. Only the outer PRCM node has a reg
> property, so the clock/reset drivers use the parent device's MMIO base.
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
> I didn't reuse the sunxi gate/reset ops, because the driver is actually
> smaller without them. I tested this driver on an A33 tablet.
>
> drivers/clk/sunxi/Kconfig | 13 +++-
> drivers/clk/sunxi/Makefile | 1 +
> drivers/clk/sunxi/clk_sun6i_prcm.c | 104 +++++++++++++++++++++++++++++
> 3 files changed, 116 insertions(+), 2 deletions(-)
> create mode 100644 drivers/clk/sunxi/clk_sun6i_prcm.c
>
> diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
> index bf11fad6eef..759ef410b66 100644
> --- a/drivers/clk/sunxi/Kconfig
> +++ b/drivers/clk/sunxi/Kconfig
> @@ -39,11 +39,20 @@ config CLK_SUN6I_A31
> on Allwinner A31/A31s SoC.
>
> config CLK_SUN6I_A31_R
> - bool "Clock driver for Allwinner A31 generation PRCM"
> + bool "Clock driver for Allwinner A31 generation PRCM (CCU)"
> default SUNXI_GEN_SUN6I
> help
> This enables common clock driver support for the PRCM
> - in Allwinner A31/A31s/A23/A33/A83T/H3/A64/H5 SoCs.
> + in Allwinner A31/A31s/A23/A33/A83T/H3/A64/H5 SoCs using
> + the CCU binding.
> +
> +config CLK_SUN6I_PRCM
> + bool "Clock driver for Allwinner A31 generation PRCM (legacy)"
> + default MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
> + help
> + This enables common clock driver support for the PRCM
> + in Allwinner A31/A31s/A23/A33 SoCs using the legacy PRCM
> + MFD binding.
>
> config CLK_SUN8I_A23
> bool "Clock driver for Allwinner A23/A33"
> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> index 895da02ebea..3266409cc7a 100644
> --- a/drivers/clk/sunxi/Makefile
> +++ b/drivers/clk/sunxi/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_CLK_SUN4I_A10) += clk_a10.o
> obj-$(CONFIG_CLK_SUN5I_A10S) += clk_a10s.o
> obj-$(CONFIG_CLK_SUN6I_A31) += clk_a31.o
> obj-$(CONFIG_CLK_SUN6I_A31_R) += clk_a31_r.o
> +obj-$(CONFIG_CLK_SUN6I_PRCM) += clk_sun6i_prcm.o
> obj-$(CONFIG_CLK_SUN8I_A23) += clk_a23.o
> obj-$(CONFIG_CLK_SUN8I_A83T) += clk_a83t.o
> obj-$(CONFIG_CLK_SUN8I_R40) += clk_r40.o
> diff --git a/drivers/clk/sunxi/clk_sun6i_prcm.c b/drivers/clk/sunxi/clk_sun6i_prcm.c
> new file mode 100644
> index 00000000000..488b47e77a7
> --- /dev/null
> +++ b/drivers/clk/sunxi/clk_sun6i_prcm.c
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2022 Samuel Holland <samuel at sholland.org>
> + */
> +
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <reset-uclass.h>
> +#include <asm/io.h>
> +#include <linux/bitops.h>
> +
> +struct sun6i_prcm_plat {
> + void *base;
> +};
> +
> +static int sun6i_prcm_set_field(struct udevice *dev, uint reg,
> + u32 mask, bool set)
> +{
> + struct sun6i_prcm_plat *plat = dev_get_plat(dev->parent);
> +
> + clrsetbits_le32(plat->base + reg, mask, set ? mask : 0);
> +
> + return 0;
> +}
> +
> +static int sun6i_prcm_clk_enable(struct clk *clk)
> +{
> + return sun6i_prcm_set_field(clk->dev, 0x28, BIT(clk->id), true);
> +}
> +
> +static int sun6i_prcm_clk_disable(struct clk *clk)
> +{
> + return sun6i_prcm_set_field(clk->dev, 0x28, BIT(clk->id), false);
> +}
> +
> +static const struct clk_ops sun6i_prcm_clk_ops = {
> + .enable = sun6i_prcm_clk_enable,
> + .disable = sun6i_prcm_clk_disable,
> +};
> +
> +static const struct udevice_id sun6i_prcm_clk_ids[] = {
> + { .compatible = "allwinner,sun6i-a31-apb0-gates-clk" },
> + { .compatible = "allwinner,sun8i-a23-apb0-gates-clk" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(sun6i_prcm_clk) = {
> + .name = "sun6i_prcm_clk",
> + .id = UCLASS_CLK,
> + .of_match = sun6i_prcm_clk_ids,
> + .ops = &sun6i_prcm_clk_ops,
> +};
> +
> +static int sun6i_prcm_reset_assert(struct reset_ctl *reset)
> +{
> + return sun6i_prcm_set_field(reset->dev, 0xb0, BIT(reset->id), false);
> +}
> +
> +static int sun6i_prcm_reset_deassert(struct reset_ctl *reset)
> +{
> + return sun6i_prcm_set_field(reset->dev, 0xb0, BIT(reset->id), true);
> +}
> +
> +static const struct reset_ops sun6i_prcm_reset_ops = {
> + .rst_assert = sun6i_prcm_reset_assert,
> + .rst_deassert = sun6i_prcm_reset_deassert,
> +};
> +
> +static const struct udevice_id sun6i_prcm_reset_ids[] = {
> + { .compatible = "allwinner,sun6i-a31-clock-reset" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(sun6i_prcm_reset) = {
> + .name = "sun6i_prcm_reset",
> + .id = UCLASS_RESET,
> + .of_match = sun6i_prcm_reset_ids,
> + .ops = &sun6i_prcm_reset_ops,
> +};
> +
> +static int sun6i_prcm_of_to_plat(struct udevice *dev)
> +{
> + struct sun6i_prcm_plat *plat = dev_get_plat(dev);
> +
> + plat->base = dev_read_addr_ptr(dev);
> + if (!plat->base)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +static const struct udevice_id sun6i_prcm_mfd_ids[] = {
> + { .compatible = "allwinner,sun6i-a31-prcm" },
> + { .compatible = "allwinner,sun8i-a23-prcm" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(sun6i_prcm_mfd) = {
> + .name = "sun6i_prcm_mfd",
> + .id = UCLASS_SIMPLE_BUS,
> + .of_match = sun6i_prcm_mfd_ids,
> + .of_to_plat = sun6i_prcm_of_to_plat,
> + .plat_auto = sizeof(struct sun6i_prcm_plat),
> +};
Reviewed-by: Sean Anderson <seanga2 at gmail.com>
More information about the U-Boot
mailing list