[PATCH] microblaze: spl: drop boot_linux and disable falcon mode by default

[Ovidiu Panait]

Make spl_start_uboot() available only if CONFIG_SPL_OS_BOOT is enabled
and drop boot_linux, as the variable is not assigned anywhere.

Also, disable CONFIG_SPL_OS_BOOT in defconfig so that a
microblaze-generic_defconfig build will still boot into u-boot proper, as
it does currently.

Signed-off-by: Ovidiu Panait <ovpanait at gmail.com>
---

 arch/microblaze/cpu/spl.c            | 11 ++---------
 common/spl/Kconfig                   |  2 ++
 configs/microblaze-generic_defconfig |  3 ---
 3 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c
index cea6d56f16..eaa095ba99 100644
--- a/arch/microblaze/cpu/spl.c
+++ b/arch/microblaze/cpu/spl.c
@@ -14,8 +14,6 @@
 #include <asm/u-boot.h>
 #include <linux/stringify.h>
 
-bool boot_linux;
-
 void board_boot_order(u32 *spl_boot_list)
 {
 	spl_boot_list[0] = BOOT_DEVICE_NOR;
@@ -41,17 +39,12 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image)
 
 	image_entry(NULL, 0, (ulong)spl_image->arg);
 }
-#endif /* CONFIG_SPL_OS_BOOT */
 
 int spl_start_uboot(void)
 {
-#ifdef CONFIG_SPL_OS_BOOT
-	if (boot_linux)
-		return 0;
-#endif
-
-	return 1;
+	return 0;
 }
+#endif /* CONFIG_SPL_OS_BOOT */
 
 int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 3c2af453ab..de6d8c3a18 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1081,6 +1081,7 @@ config SYS_SPL_ARGS_ADDR
 	hex "Address in memory to load 'args' file for Falcon Mode to"
 	depends on SPL_OS_BOOT
 	default 0x88000000 if ARCH_OMAP2PLUS
+	default 0x2a000000 if MICROBLAZE
 	help
 	  Address in memory where the 'args' file, typically a device tree
 	  will be loaded in to memory.
@@ -1092,6 +1093,7 @@ config SYS_NAND_SPL_KERNEL_OFFS
 config SYS_OS_BASE
 	hex "addr, where OS is found"
 	depends on SPL_OS_BOOT && SPL_NOR_SUPPORT
+	default 0x2c060000 if MICROBLAZE
 	help
 	  Specify the address, where the OS image is found, which
 	  gets booted.
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index be34941805..438540fbe4 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -33,9 +33,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK=0x100000
 CONFIG_SPL_NOR_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x2a000000
-CONFIG_SYS_OS_BASE=0x2c060000
 CONFIG_SYS_MAXARGS=15
 CONFIG_SYS_CBSIZE=512
 CONFIG_SYS_PBSIZE=544
-- 
2.25.1