[PATCH] microblaze: spl: drop boot_linux and disable falcon mode by default

[Michal Simek]

On 1/22/23 19:02, Ovidiu Panait wrote:
> Make spl_start_uboot() available only if CONFIG_SPL_OS_BOOT is enabled

this is one patch

> and drop boot_linux, as the variable is not assigned anywhere.

This is another patch.

> 
> Also, disable CONFIG_SPL_OS_BOOT in defconfig so that a
> microblaze-generic_defconfig build will still boot into u-boot proper, as
> it does currently.

This is third patch.

> 
> Signed-off-by: Ovidiu Panait <ovpanait at gmail.com>
> ---
> 
>   arch/microblaze/cpu/spl.c            | 11 ++---------
>   common/spl/Kconfig                   |  2 ++
>   configs/microblaze-generic_defconfig |  3 ---
>   3 files changed, 4 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c
> index cea6d56f16..eaa095ba99 100644
> --- a/arch/microblaze/cpu/spl.c
> +++ b/arch/microblaze/cpu/spl.c
> @@ -14,8 +14,6 @@
>   #include <asm/u-boot.h>
>   #include <linux/stringify.h>
>   
> -bool boot_linux;
> -
>   void board_boot_order(u32 *spl_boot_list)
>   {
>   	spl_boot_list[0] = BOOT_DEVICE_NOR;
> @@ -41,17 +39,12 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image)
>   
>   	image_entry(NULL, 0, (ulong)spl_image->arg);
>   }
> -#endif /* CONFIG_SPL_OS_BOOT */
>   
>   int spl_start_uboot(void)
>   {
> -#ifdef CONFIG_SPL_OS_BOOT
> -	if (boot_linux)
> -		return 0;
> -#endif
> -
> -	return 1;
> +	return 0;
>   }
> +#endif /* CONFIG_SPL_OS_BOOT */
>   
>   int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
>   {
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 3c2af453ab..de6d8c3a18 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -1081,6 +1081,7 @@ config SYS_SPL_ARGS_ADDR
>   	hex "Address in memory to load 'args' file for Falcon Mode to"
>   	depends on SPL_OS_BOOT
>   	default 0x88000000 if ARCH_OMAP2PLUS
> +	default 0x2a000000 if MICROBLAZE

I prefer not to do it because on microblaze all these addresses are just 
examples anyway. It means don't need to record current values there.

>   	help
>   	  Address in memory where the 'args' file, typically a device tree
>   	  will be loaded in to memory.
> @@ -1092,6 +1093,7 @@ config SYS_NAND_SPL_KERNEL_OFFS
>   config SYS_OS_BASE
>   	hex "addr, where OS is found"
>   	depends on SPL_OS_BOOT && SPL_NOR_SUPPORT
> +	default 0x2c060000 if MICROBLAZE

Same here.

>   	help
>   	  Specify the address, where the OS image is found, which
>   	  gets booted.
> diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
> index be34941805..438540fbe4 100644
> --- a/configs/microblaze-generic_defconfig
> +++ b/configs/microblaze-generic_defconfig
> @@ -33,9 +33,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>   # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>   CONFIG_SPL_STACK=0x100000
>   CONFIG_SPL_NOR_SUPPORT=y
> -CONFIG_SPL_OS_BOOT=y
> -CONFIG_SYS_SPL_ARGS_ADDR=0x2a000000
> -CONFIG_SYS_OS_BASE=0x2c060000

This is fine just to remove these addresses.

>   CONFIG_SYS_MAXARGS=15
>   CONFIG_SYS_CBSIZE=512
>   CONFIG_SYS_PBSIZE=544


Thanks,
Michal