[PATCH 02/88] treewide: Correct invalid Kconfig syntax and warnings

Simon Glass sjg at chromium.org
Mon Jan 23 22:59:05 CET 2023 

In several places a 'select' is used to select a choice, which is not
supported by Kconfig. In other places, the filename for the 'source'
command is not in quites.

Fix these two problems throughout the tree, so that kconfiglib does not
show any more warnings.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/Kconfig                          |  4 ++--
 arch/arc/Kconfig                      | 14 +++++++-------
 arch/arm/Kconfig                      |  6 +++---
 arch/arm/mach-nexell/Kconfig          |  2 +-
 arch/arm/mach-rmobile/Kconfig.64      |  8 ++++----
 arch/arm/mach-rockchip/rv1108/Kconfig |  4 ++--
 arch/arm/mach-rockchip/rv1126/Kconfig |  2 +-
 arch/x86/cpu/apollolake/Kconfig       |  2 +-
 board/efi/Kconfig                     |  4 ++--
 board/openpiton/riscv64/Kconfig       |  2 +-
 board/siemens/iot2050/Kconfig         |  2 +-
 board/ti/am62ax/Kconfig               |  4 ++--
 board/ti/am62x/Kconfig                |  4 ++--
 board/ti/am64x/Kconfig                |  4 ++--
 board/ti/am65x/Kconfig                |  4 ++--
 board/ti/j721e/Kconfig                |  8 ++++----
 board/ti/j721s2/Kconfig               |  4 ++--
 cmd/Kconfig                           |  4 ++--
 drivers/clk/Kconfig                   | 10 +++++-----
 drivers/crypto/Kconfig                |  8 ++++----
 drivers/ddr/imx/imx8ulp/Kconfig       |  2 +-
 drivers/pinctrl/intel/Kconfig         |  2 +-
 drivers/usb/host/Kconfig              |  2 +-
 lib/Kconfig                           | 18 +++++++++---------
 24 files changed, 62 insertions(+), 62 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index d30676ae817..3b95fbe9b36 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -53,8 +53,8 @@ config ARC
 	select SUPPORT_OF_CONTROL
 	select SYS_CACHE_SHIFT_7
 	select TIMER
-	select SYS_BIG_ENDIAN if CPU_BIG_ENDIAN
-	select SYS_LITTLE_ENDIAN if !CPU_BIG_ENDIAN
+	# select SYS_BIG_ENDIAN if CPU_BIG_ENDIAN
+	# select SYS_LITTLE_ENDIAN if !CPU_BIG_ENDIAN
 
 config ARM
 	bool "ARM architecture"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 6ae66bb163c..8c0d1c8a3ee 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -32,35 +32,35 @@ choice
 config CPU_ARC750D
 	bool "ARC 750D"
 	depends on ISA_ARCOMPACT
-	select ARC_MMU_V2
+	# select ARC_MMU_V2
 	help
 	  Choose this option to build an U-Boot for ARC750D CPU.
 
 config CPU_ARC770D
 	bool "ARC 770D"
 	depends on ISA_ARCOMPACT
-	select ARC_MMU_V3
+	# select ARC_MMU_V3
 	help
 	  Choose this option to build an U-Boot for ARC770D CPU.
 
 config CPU_ARCEM6
 	bool "ARC EM6"
 	depends on ISA_ARCV2
-	select ARC_MMU_ABSENT
+	# select ARC_MMU_ABSENT
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA without MMU.
 
 config CPU_ARCHS36
 	bool "ARC HS36"
 	depends on ISA_ARCV2
-	select ARC_MMU_ABSENT
+	# select ARC_MMU_ABSENT
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA without MMU.
 
 config CPU_ARCHS38
 	bool "ARC HS38"
 	depends on ISA_ARCV2
-	select ARC_MMU_V4
+	# select ARC_MMU_V4
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA with MMU.
 
@@ -172,14 +172,14 @@ config TARGET_AXS103
 
 config TARGET_EMSDP
 	bool "Synopsys EM Software Development Platform"
-	select CPU_ARCEM6
+	# select CPU_ARCEM6
 
 config TARGET_HSDK
 	bool "Support Synopsys HSDK or HSDK-4xD board"
 
 config TARGET_IOT_DEVKIT
 	bool "Synopsys Brite IoT Development kit"
-	select CPU_ARCEM6
+	# select CPU_ARCEM6
 
 endchoice
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c9a44ebc221..b18af584770 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -598,7 +598,7 @@ config ARCH_MVEBU
 	select SPL_TIMER if SPL
 	select TIMER if !ARM64
 	select OF_CONTROL
-	select OF_SEPARATE
+	# select OF_SEPARATE
 	select SPI
 	imply CMD_DM
 
@@ -1038,7 +1038,7 @@ config ARCH_SNAPDRAGON
 	select GPIO_EXTRA_HEADER
 	select MSM_SMEM
 	select OF_CONTROL
-	select OF_SEPARATE
+	# select OF_SEPARATE
 	select SMEM
 	select SPMI
 	imply CMD_DM
@@ -1107,7 +1107,7 @@ config ARCH_SUNXI
 	select GPIO_EXTRA_HEADER
 	select OF_BOARD_SETUP
 	select OF_CONTROL
-	select OF_SEPARATE
+	# select OF_SEPARATE
 	select PINCTRL
 	select SPECIFY_CONSOLE_INDEX
 	select SPL_SEPARATE_BSS if SPL
diff --git a/arch/arm/mach-nexell/Kconfig b/arch/arm/mach-nexell/Kconfig
index 16324e15206..fd6c7774f68 100644
--- a/arch/arm/mach-nexell/Kconfig
+++ b/arch/arm/mach-nexell/Kconfig
@@ -4,7 +4,7 @@ config ARCH_S5P4418
 	bool "Nexell S5P4418 SoC"
 	select CPU_V7A
 	select OF_CONTROL
-	select OF_SEPARATE
+	# select OF_SEPARATE
 	select NX_GPIO
 	select DM_SERIAL
 	select PL01X_SERIAL
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 007eaad251d..0e8a49deeb6 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -93,7 +93,7 @@ config TARGET_BEACON_RZG2M
 	select PINCTRL_PFC_R8A774B1
 	select PINCTRL_PFC_R8A774E1
 	imply MULTI_DTB_FIT
-	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	# imply MULTI_DTB_FIT_USER_DEFINED_AREA
 	imply CLK_VERSACLOCK
 	imply CLK_CCF
 
@@ -135,7 +135,7 @@ config TARGET_HIHOPE_RZG2
 	imply RZ_G2
 	imply SYS_MALLOC_F
 	imply MULTI_DTB_FIT
-	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	# imply MULTI_DTB_FIT_USER_DEFINED_AREA
 	help
           Support for RZG2 HiHope platform
 
@@ -153,7 +153,7 @@ config TARGET_SALVATOR_X
 	imply R8A77965
 	imply SYS_MALLOC_F
 	imply MULTI_DTB_FIT
-	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	# imply MULTI_DTB_FIT_USER_DEFINED_AREA
 	help
           Support for Renesas R-Car Gen3 platform
 
@@ -164,7 +164,7 @@ config TARGET_ULCB
 	imply R8A77965
 	imply SYS_MALLOC_F
 	imply MULTI_DTB_FIT
-	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	# imply MULTI_DTB_FIT_USER_DEFINED_AREA
 	help
           Support for Renesas R-Car Gen3 ULCB platform
 
diff --git a/arch/arm/mach-rockchip/rv1108/Kconfig b/arch/arm/mach-rockchip/rv1108/Kconfig
index a12216dccf6..28ed0b24581 100644
--- a/arch/arm/mach-rockchip/rv1108/Kconfig
+++ b/arch/arm/mach-rockchip/rv1108/Kconfig
@@ -36,7 +36,7 @@ config SYS_SOC
 config SYS_MALLOC_F_LEN
 	default 0x400
 
-source board/rockchip/evb_rv1108/Kconfig
-source board/elgin/elgin_rv1108/Kconfig
+source "board/rockchip/evb_rv1108/Kconfig"
+source "board/elgin/elgin_rv1108/Kconfig"
 
 endif
diff --git a/arch/arm/mach-rockchip/rv1126/Kconfig b/arch/arm/mach-rockchip/rv1126/Kconfig
index 7382c559966..e13d4093688 100644
--- a/arch/arm/mach-rockchip/rv1126/Kconfig
+++ b/arch/arm/mach-rockchip/rv1126/Kconfig
@@ -54,6 +54,6 @@ config SYS_MALLOC_F_LEN
 config TEXT_BASE
 	default 0x600000
 
-source board/edgeble/neural-compute-module-2/Kconfig
+source "board/edgeble/neural-compute-module-2/Kconfig"
 
 endif
diff --git a/arch/x86/cpu/apollolake/Kconfig b/arch/x86/cpu/apollolake/Kconfig
index c7f26d171cb..5fea952188a 100644
--- a/arch/x86/cpu/apollolake/Kconfig
+++ b/arch/x86/cpu/apollolake/Kconfig
@@ -5,7 +5,7 @@
 
 config INTEL_APOLLOLAKE
 	bool
-	select FSP_VERSION2
+	# select FSP_VERSION2
 	select HAVE_FSP
 	select ARCH_MISC_INIT
 	select USE_CAR
diff --git a/board/efi/Kconfig b/board/efi/Kconfig
index 3df6e31c8ba..688cb9d82d2 100644
--- a/board/efi/Kconfig
+++ b/board/efi/Kconfig
@@ -6,7 +6,7 @@ choice
 
 config TARGET_EFI_APP32
 	bool "32-bit efi application"
-	select EFI_APP
+	# select EFI_APP
 	help
 	  This target is used for running U-Boot on top of EFI. In
 	  this case EFI does the early initialisation, and U-Boot
@@ -15,7 +15,7 @@ config TARGET_EFI_APP32
 
 config TARGET_EFI_APP64
 	bool "64-bit efi application"
-	select EFI_APP
+	# select EFI_APP
 	select X86_64
 	help
 	  This target is used for running U-Boot on top of EFI in 64-bit mode.
diff --git a/board/openpiton/riscv64/Kconfig b/board/openpiton/riscv64/Kconfig
index eb0db8a64c8..02ad27309aa 100644
--- a/board/openpiton/riscv64/Kconfig
+++ b/board/openpiton/riscv64/Kconfig
@@ -35,6 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	imply SPL_SMP
 	imply SPL_MMC
 	imply SMP
-	imply SPL_RISCV_MMODE
+	# imply SPL_RISCV_MMODE
 
 endif
diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig
index 063142a43bf..096102bd370 100644
--- a/board/siemens/iot2050/Kconfig
+++ b/board/siemens/iot2050/Kconfig
@@ -9,7 +9,7 @@
 config TARGET_IOT2050_A53
 	bool "IOT2050 running on A53"
 	select ARM64
-	select SOC_K3_AM654
+	# select SOC_K3_AM654
 	select BOARD_LATE_INIT
 	select SYS_DISABLE_DCACHE_OPS
 	select BINMAN
diff --git a/board/ti/am62ax/Kconfig b/board/ti/am62ax/Kconfig
index 2c18cd49b5d..db3bdc5f35c 100644
--- a/board/ti/am62ax/Kconfig
+++ b/board/ti/am62ax/Kconfig
@@ -10,7 +10,7 @@ choice
 config TARGET_AM62A7_A53_EVM
 	bool "TI K3 based AM62A7 EVM running on A53"
 	select ARM64
-	select SOC_K3_AM62A7
+	# select SOC_K3_AM62A7
 	imply BOARD
 	imply SPL_BOARD
 	imply TI_I2C_BOARD_DETECT
@@ -20,7 +20,7 @@ config TARGET_AM62A7_R5_EVM
 	select CPU_V7R
 	select SYS_THUMB_BUILD
 	select K3_LOAD_SYSFW
-	select SOC_K3_AM62A7
+	# select SOC_K3_AM62A7
 	select RAM
 	select SPL_RAM
 	select K3_DDRSS
diff --git a/board/ti/am62x/Kconfig b/board/ti/am62x/Kconfig
index 87fed44df17..090ece3315a 100644
--- a/board/ti/am62x/Kconfig
+++ b/board/ti/am62x/Kconfig
@@ -10,14 +10,14 @@ choice
 config TARGET_AM625_A53_EVM
 	bool "TI K3 based AM625 EVM running on A53"
 	select ARM64
-	select SOC_K3_AM625
+	# select SOC_K3_AM625
 
 config TARGET_AM625_R5_EVM
 	bool "TI K3 based AM625 EVM running on R5"
 	select CPU_V7R
 	select SYS_THUMB_BUILD
 	select K3_LOAD_SYSFW
-	select SOC_K3_AM625
+	# select SOC_K3_AM625
 	select RAM
 	select SPL_RAM
 	select K3_DDRSS
diff --git a/board/ti/am64x/Kconfig b/board/ti/am64x/Kconfig
index 8036947e345..f642109686f 100644
--- a/board/ti/am64x/Kconfig
+++ b/board/ti/am64x/Kconfig
@@ -9,7 +9,7 @@ choice
 config TARGET_AM642_A53_EVM
 	bool "TI K3 based AM642 EVM running on A53"
 	select ARM64
-	select SOC_K3_AM642
+	# select SOC_K3_AM642
 	imply BOARD
 	imply SPL_BOARD
 	imply TI_I2C_BOARD_DETECT
@@ -19,7 +19,7 @@ config TARGET_AM642_R5_EVM
 	select CPU_V7R
 	select SYS_THUMB_BUILD
 	select K3_LOAD_SYSFW
-	select SOC_K3_AM642
+	# select SOC_K3_AM642
 	select RAM
 	select SPL_RAM
 	select K3_DDRSS
diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig
index 4765b13ba0c..dcdc46f0b59 100644
--- a/board/ti/am65x/Kconfig
+++ b/board/ti/am65x/Kconfig
@@ -10,7 +10,7 @@ choice
 config TARGET_AM654_A53_EVM
 	bool "TI K3 based AM654 EVM running on A53"
 	select ARM64
-	select SOC_K3_AM654
+	# select SOC_K3_AM654
 	select SYS_DISABLE_DCACHE_OPS
 	select BOARD_LATE_INIT
 	imply TI_I2C_BOARD_DETECT
@@ -19,7 +19,7 @@ config TARGET_AM654_R5_EVM
 	bool "TI K3 based AM654 EVM running on R5"
 	select CPU_V7R
 	select SYS_THUMB_BUILD
-	select SOC_K3_AM654
+	# select SOC_K3_AM654
 	select K3_LOAD_SYSFW
 	select K3_AM654_DDRSS
 	imply SYS_K3_SPL_ATF
diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index d19d30d59ef..f997741fe5a 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -10,7 +10,7 @@ choice
 config TARGET_J721E_A72_EVM
 	bool "TI K3 based J721E EVM running on A72"
 	select ARM64
-	select SOC_K3_J721E
+	# select SOC_K3_J721E
 	select BOARD_LATE_INIT
 	imply TI_I2C_BOARD_DETECT
 	select SYS_DISABLE_DCACHE_OPS
@@ -19,7 +19,7 @@ config TARGET_J721E_R5_EVM
 	bool "TI K3 based J721E EVM running on R5"
 	select CPU_V7R
 	select SYS_THUMB_BUILD
-	select SOC_K3_J721E
+	# select SOC_K3_J721E
 	select K3_LOAD_SYSFW
 	select RAM
 	select SPL_RAM
@@ -30,7 +30,7 @@ config TARGET_J721E_R5_EVM
 config TARGET_J7200_A72_EVM
 	bool "TI K3 based J7200 EVM running on A72"
 	select ARM64
-	select SOC_K3_J721E
+	# select SOC_K3_J721E
 	select BOARD_LATE_INIT
 	imply TI_I2C_BOARD_DETECT
 	select SYS_DISABLE_DCACHE_OPS
@@ -39,7 +39,7 @@ config TARGET_J7200_R5_EVM
 	bool "TI K3 based J7200 EVM running on R5"
 	select CPU_V7R
 	select SYS_THUMB_BUILD
-	select SOC_K3_J721E
+	# select SOC_K3_J721E
 	select K3_LOAD_SYSFW
 	select RAM
 	select SPL_RAM
diff --git a/board/ti/j721s2/Kconfig b/board/ti/j721s2/Kconfig
index 6141798333c..1631778eaed 100644
--- a/board/ti/j721s2/Kconfig
+++ b/board/ti/j721s2/Kconfig
@@ -10,7 +10,7 @@ choice
 config TARGET_J721S2_A72_EVM
 	bool "TI K3 based J721S2 EVM running on A72"
 	select ARM64
-	select SOC_K3_J721S2
+	# select SOC_K3_J721S2
 	select BOARD_LATE_INIT
 	imply TI_I2C_BOARD_DETECT
 	select SYS_DISABLE_DCACHE_OPS
@@ -19,7 +19,7 @@ config TARGET_J721S2_R5_EVM
 	bool "TI K3 based J721S2 EVM running on R5"
 	select CPU_V7R
 	select SYS_THUMB_BUILD
-	select SOC_K3_J721S2
+	# select SOC_K3_J721S2
 	select K3_LOAD_SYSFW
 	select RAM
 	select SPL_RAM
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 4fe2c75de25..b3c1fcaf6e6 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -394,7 +394,7 @@ config CMD_BOOTEFI_HELLO
 	  for testing that EFI is working at a basic level, and for bringing
 	  up EFI support on a new architecture.
 
-source lib/efi_selftest/Kconfig
+source "lib/efi_selftest/Kconfig"
 
 config CMD_BOOTMENU
 	bool "bootmenu"
@@ -1876,7 +1876,7 @@ config CMD_DNS
 
 config CMD_LINK_LOCAL
 	bool "linklocal"
-	select LIB_RAND
+	# select LIB_RAND
 	help
 	  Acquire a network IP address using the link-local protocol
 
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 09aa97ee8c0..a7409a0cb34 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -57,27 +57,27 @@ config CLK_BOSTON
 	  Enable this to support the clocks
 
 config SPL_CLK_CCF
-	bool "SPL Common Clock Framework [CCF] support "
+	bool "SPL Common Clock Framework [CCF] support"
 	depends on SPL
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] code in U-Boot's SPL.
 
 config SPL_CLK_COMPOSITE_CCF
-	bool "SPL Common Clock Framework [CCF] composite clk support "
+	bool "SPL Common Clock Framework [CCF] composite clk support"
 	depends on SPL_CLK_CCF
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] composite code in U-Boot's SPL.
 
 config CLK_CCF
-	bool "Common Clock Framework [CCF] support "
+	bool "Common Clock Framework [CCF] support"
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] code in U-Boot's clock driver.
 
 config CLK_COMPOSITE_CCF
-	bool "Common Clock Framework [CCF] composite clk support "
+	bool "Common Clock Framework [CCF] composite clk support"
 	depends on CLK_CCF
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
@@ -151,7 +151,7 @@ config CLK_OCTEON
 	  Enable this to support the clocks on Octeon MIPS platforms.
 
 config SANDBOX_CLK_CCF
-	bool "Sandbox Common Clock Framework [CCF] support "
+	bool "Sandbox Common Clock Framework [CCF] support"
 	depends on SANDBOX
 	select CLK_CCF
 	help
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 12ef84ca05c..8b49997030b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -1,11 +1,11 @@
 menu "Hardware crypto devices"
 
-source drivers/crypto/hash/Kconfig
+source "drivers/crypto/hash/Kconfig"
 
-source drivers/crypto/fsl/Kconfig
+source "drivers/crypto/fsl/Kconfig"
 
-source drivers/crypto/aspeed/Kconfig
+source "drivers/crypto/aspeed/Kconfig"
 
-source drivers/crypto/nuvoton/Kconfig
+source "drivers/crypto/nuvoton/Kconfig"
 
 endmenu
diff --git a/drivers/ddr/imx/imx8ulp/Kconfig b/drivers/ddr/imx/imx8ulp/Kconfig
index 42848863aae..90407982de9 100644
--- a/drivers/ddr/imx/imx8ulp/Kconfig
+++ b/drivers/ddr/imx/imx8ulp/Kconfig
@@ -5,7 +5,7 @@ config IMX8ULP_DRAM
 	bool "imx8m dram"
 
 config IMX8ULP_DRAM_PHY_PLL_BYPASS
-	bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK "
+	bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK"
 	depends on IMX8ULP_DRAM
 
 config SAVED_DRAM_TIMING_BASE
diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
index 316a8fe27fd..233289c9be8 100644
--- a/drivers/pinctrl/intel/Kconfig
+++ b/drivers/pinctrl/intel/Kconfig
@@ -9,7 +9,7 @@ config INTEL_PINCTRL_DUAL_ROUTE_SUPPORT
 	default y
 
 config INTEL_PINCTRL_PADCFG_PADTOL
-	bool n
+	bool
 
 config INTEL_PINCTRL_IOSTANDBY
 	bool
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6213b3c95fa..d7209637479 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -252,7 +252,7 @@ endif
 config USB_EHCI_MSM
 	bool "Support for Qualcomm on-chip EHCI USB controller"
 	depends on DM_USB
-	select USB_ULPI_VIEWPORT
+	# select USB_ULPI_VIEWPORT
 	select MSM8916_USB_PHY
 	---help---
 	  Enables support for the on-chip EHCI controller on Qualcomm
diff --git a/lib/Kconfig b/lib/Kconfig
index 549bd357785..efb0cbccc83 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -389,7 +389,7 @@ config TRACE_EARLY_ADDR
 config CIRCBUF
 	bool "Enable circular buffer support"
 
-source lib/dhry/Kconfig
+source "lib/dhry/Kconfig"
 
 menu "Security support"
 
@@ -402,10 +402,10 @@ config AES
 	  supported by the algorithm but only a 128-bit key is supported at
 	  present.
 
-source lib/ecdsa/Kconfig
-source lib/rsa/Kconfig
-source lib/crypto/Kconfig
-source lib/crypt/Kconfig
+source "lib/ecdsa/Kconfig"
+source "lib/rsa/Kconfig"
+source "lib/crypto/Kconfig"
+source "lib/crypt/Kconfig"
 
 config TPM
 	bool "Trusted Platform Module (TPM) Support"
@@ -1001,9 +1001,9 @@ config SMBIOS_PARSER
 	help
 	  A simple parser for SMBIOS data.
 
-source lib/efi/Kconfig
-source lib/efi_loader/Kconfig
-source lib/optee/Kconfig
+source "lib/efi/Kconfig"
+source "lib/efi_loader/Kconfig"
+source "lib/optee/Kconfig"
 
 config TEST_FDTDEC
 	bool "enable fdtdec test"
@@ -1071,6 +1071,6 @@ endmenu
 
 menu "FWU Multi Bank Updates"
 
-source lib/fwu_updates/Kconfig
+source "lib/fwu_updates/Kconfig"
 
 endmenu
-- 
2.39.1.456.gfc5497dd1b-goog

More information about the U-Boot mailing list