[PATCH 02/88] treewide: Correct invalid Kconfig syntax and warnings
Neha Malcom Francis
n-francis at ti.com
Fri Jan 27 11:06:34 CET 2023
Hi Simon
On 24/01/23 03:29, Simon Glass wrote:
> In several places a 'select' is used to select a choice, which is not
> supported by Kconfig. In other places, the filename for the 'source'
> command is not in quites.
>
> Fix these two problems throughout the tree, so that kconfiglib does not
> show any more warnings.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> arch/Kconfig | 4 ++--
> arch/arc/Kconfig | 14 +++++++-------
> arch/arm/Kconfig | 6 +++---
> arch/arm/mach-nexell/Kconfig | 2 +-
> arch/arm/mach-rmobile/Kconfig.64 | 8 ++++----
> arch/arm/mach-rockchip/rv1108/Kconfig | 4 ++--
> arch/arm/mach-rockchip/rv1126/Kconfig | 2 +-
> arch/x86/cpu/apollolake/Kconfig | 2 +-
> board/efi/Kconfig | 4 ++--
> board/openpiton/riscv64/Kconfig | 2 +-
> board/siemens/iot2050/Kconfig | 2 +-
> board/ti/am62ax/Kconfig | 4 ++--
> board/ti/am62x/Kconfig | 4 ++--
> board/ti/am64x/Kconfig | 4 ++--
> board/ti/am65x/Kconfig | 4 ++--
> board/ti/j721e/Kconfig | 8 ++++----
> board/ti/j721s2/Kconfig | 4 ++--
> cmd/Kconfig | 4 ++--
> drivers/clk/Kconfig | 10 +++++-----
> drivers/crypto/Kconfig | 8 ++++----
> drivers/ddr/imx/imx8ulp/Kconfig | 2 +-
> drivers/pinctrl/intel/Kconfig | 2 +-
> drivers/usb/host/Kconfig | 2 +-
> lib/Kconfig | 18 +++++++++---------
> 24 files changed, 62 insertions(+), 62 deletions(-)
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index d30676ae817..3b95fbe9b36 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -53,8 +53,8 @@ config ARC
> select SUPPORT_OF_CONTROL
> select SYS_CACHE_SHIFT_7
> select TIMER
> - select SYS_BIG_ENDIAN if CPU_BIG_ENDIAN
> - select SYS_LITTLE_ENDIAN if !CPU_BIG_ENDIAN
> + # select SYS_BIG_ENDIAN if CPU_BIG_ENDIAN
> + # select SYS_LITTLE_ENDIAN if !CPU_BIG_ENDIAN
>
> config ARM
> bool "ARM architecture"
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index 6ae66bb163c..8c0d1c8a3ee 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -32,35 +32,35 @@ choice
> config CPU_ARC750D
> bool "ARC 750D"
> depends on ISA_ARCOMPACT
> - select ARC_MMU_V2
> + # select ARC_MMU_V2
> help
> Choose this option to build an U-Boot for ARC750D CPU.
>
> config CPU_ARC770D
> bool "ARC 770D"
> depends on ISA_ARCOMPACT
> - select ARC_MMU_V3
> + # select ARC_MMU_V3
> help
> Choose this option to build an U-Boot for ARC770D CPU.
>
> config CPU_ARCEM6
> bool "ARC EM6"
> depends on ISA_ARCV2
> - select ARC_MMU_ABSENT
> + # select ARC_MMU_ABSENT
> help
> Next Generation ARC Core based on ISA-v2 ISA without MMU.
>
> config CPU_ARCHS36
> bool "ARC HS36"
> depends on ISA_ARCV2
> - select ARC_MMU_ABSENT
> + # select ARC_MMU_ABSENT
> help
> Next Generation ARC Core based on ISA-v2 ISA without MMU.
>
> config CPU_ARCHS38
> bool "ARC HS38"
> depends on ISA_ARCV2
> - select ARC_MMU_V4
> + # select ARC_MMU_V4
> help
> Next Generation ARC Core based on ISA-v2 ISA with MMU.
>
> @@ -172,14 +172,14 @@ config TARGET_AXS103
>
> config TARGET_EMSDP
> bool "Synopsys EM Software Development Platform"
> - select CPU_ARCEM6
> + # select CPU_ARCEM6
>
> config TARGET_HSDK
> bool "Support Synopsys HSDK or HSDK-4xD board"
>
> config TARGET_IOT_DEVKIT
> bool "Synopsys Brite IoT Development kit"
> - select CPU_ARCEM6
> + # select CPU_ARCEM6
>
> endchoice
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c9a44ebc221..b18af584770 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -598,7 +598,7 @@ config ARCH_MVEBU
> select SPL_TIMER if SPL
> select TIMER if !ARM64
> select OF_CONTROL
> - select OF_SEPARATE
> + # select OF_SEPARATE
> select SPI
> imply CMD_DM
>
> @@ -1038,7 +1038,7 @@ config ARCH_SNAPDRAGON
> select GPIO_EXTRA_HEADER
> select MSM_SMEM
> select OF_CONTROL
> - select OF_SEPARATE
> + # select OF_SEPARATE
> select SMEM
> select SPMI
> imply CMD_DM
> @@ -1107,7 +1107,7 @@ config ARCH_SUNXI
> select GPIO_EXTRA_HEADER
> select OF_BOARD_SETUP
> select OF_CONTROL
> - select OF_SEPARATE
> + # select OF_SEPARATE
> select PINCTRL
> select SPECIFY_CONSOLE_INDEX
> select SPL_SEPARATE_BSS if SPL
> diff --git a/arch/arm/mach-nexell/Kconfig b/arch/arm/mach-nexell/Kconfig
> index 16324e15206..fd6c7774f68 100644
> --- a/arch/arm/mach-nexell/Kconfig
> +++ b/arch/arm/mach-nexell/Kconfig
> @@ -4,7 +4,7 @@ config ARCH_S5P4418
> bool "Nexell S5P4418 SoC"
> select CPU_V7A
> select OF_CONTROL
> - select OF_SEPARATE
> + # select OF_SEPARATE
> select NX_GPIO
> select DM_SERIAL
> select PL01X_SERIAL
> diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
> index 007eaad251d..0e8a49deeb6 100644
> --- a/arch/arm/mach-rmobile/Kconfig.64
> +++ b/arch/arm/mach-rmobile/Kconfig.64
> @@ -93,7 +93,7 @@ config TARGET_BEACON_RZG2M
> select PINCTRL_PFC_R8A774B1
> select PINCTRL_PFC_R8A774E1
> imply MULTI_DTB_FIT
> - imply MULTI_DTB_FIT_USER_DEFINED_AREA
> + # imply MULTI_DTB_FIT_USER_DEFINED_AREA
> imply CLK_VERSACLOCK
> imply CLK_CCF
>
> @@ -135,7 +135,7 @@ config TARGET_HIHOPE_RZG2
> imply RZ_G2
> imply SYS_MALLOC_F
> imply MULTI_DTB_FIT
> - imply MULTI_DTB_FIT_USER_DEFINED_AREA
> + # imply MULTI_DTB_FIT_USER_DEFINED_AREA
> help
> Support for RZG2 HiHope platform
>
> @@ -153,7 +153,7 @@ config TARGET_SALVATOR_X
> imply R8A77965
> imply SYS_MALLOC_F
> imply MULTI_DTB_FIT
> - imply MULTI_DTB_FIT_USER_DEFINED_AREA
> + # imply MULTI_DTB_FIT_USER_DEFINED_AREA
> help
> Support for Renesas R-Car Gen3 platform
>
> @@ -164,7 +164,7 @@ config TARGET_ULCB
> imply R8A77965
> imply SYS_MALLOC_F
> imply MULTI_DTB_FIT
> - imply MULTI_DTB_FIT_USER_DEFINED_AREA
> + # imply MULTI_DTB_FIT_USER_DEFINED_AREA
> help
> Support for Renesas R-Car Gen3 ULCB platform
>
> diff --git a/arch/arm/mach-rockchip/rv1108/Kconfig b/arch/arm/mach-rockchip/rv1108/Kconfig
> index a12216dccf6..28ed0b24581 100644
> --- a/arch/arm/mach-rockchip/rv1108/Kconfig
> +++ b/arch/arm/mach-rockchip/rv1108/Kconfig
> @@ -36,7 +36,7 @@ config SYS_SOC
> config SYS_MALLOC_F_LEN
> default 0x400
>
> -source board/rockchip/evb_rv1108/Kconfig
> -source board/elgin/elgin_rv1108/Kconfig
> +source "board/rockchip/evb_rv1108/Kconfig"
> +source "board/elgin/elgin_rv1108/Kconfig"
>
> endif
> diff --git a/arch/arm/mach-rockchip/rv1126/Kconfig b/arch/arm/mach-rockchip/rv1126/Kconfig
> index 7382c559966..e13d4093688 100644
> --- a/arch/arm/mach-rockchip/rv1126/Kconfig
> +++ b/arch/arm/mach-rockchip/rv1126/Kconfig
> @@ -54,6 +54,6 @@ config SYS_MALLOC_F_LEN
> config TEXT_BASE
> default 0x600000
>
> -source board/edgeble/neural-compute-module-2/Kconfig
> +source "board/edgeble/neural-compute-module-2/Kconfig"
>
> endif
> diff --git a/arch/x86/cpu/apollolake/Kconfig b/arch/x86/cpu/apollolake/Kconfig
> index c7f26d171cb..5fea952188a 100644
> --- a/arch/x86/cpu/apollolake/Kconfig
> +++ b/arch/x86/cpu/apollolake/Kconfig
> @@ -5,7 +5,7 @@
>
> config INTEL_APOLLOLAKE
> bool
> - select FSP_VERSION2
> + # select FSP_VERSION2
> select HAVE_FSP
> select ARCH_MISC_INIT
> select USE_CAR
> diff --git a/board/efi/Kconfig b/board/efi/Kconfig
> index 3df6e31c8ba..688cb9d82d2 100644
> --- a/board/efi/Kconfig
> +++ b/board/efi/Kconfig
> @@ -6,7 +6,7 @@ choice
>
> config TARGET_EFI_APP32
> bool "32-bit efi application"
> - select EFI_APP
> + # select EFI_APP
> help
> This target is used for running U-Boot on top of EFI. In
> this case EFI does the early initialisation, and U-Boot
> @@ -15,7 +15,7 @@ config TARGET_EFI_APP32
>
> config TARGET_EFI_APP64
> bool "64-bit efi application"
> - select EFI_APP
> + # select EFI_APP
> select X86_64
> help
> This target is used for running U-Boot on top of EFI in 64-bit mode.
> diff --git a/board/openpiton/riscv64/Kconfig b/board/openpiton/riscv64/Kconfig
> index eb0db8a64c8..02ad27309aa 100644
> --- a/board/openpiton/riscv64/Kconfig
> +++ b/board/openpiton/riscv64/Kconfig
> @@ -35,6 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
> imply SPL_SMP
> imply SPL_MMC
> imply SMP
> - imply SPL_RISCV_MMODE
> + # imply SPL_RISCV_MMODE
>
> endif
> diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig
> index 063142a43bf..096102bd370 100644
> --- a/board/siemens/iot2050/Kconfig
> +++ b/board/siemens/iot2050/Kconfig
> @@ -9,7 +9,7 @@
> config TARGET_IOT2050_A53
> bool "IOT2050 running on A53"
> select ARM64
> - select SOC_K3_AM654
> + # select SOC_K3_AM654
> select BOARD_LATE_INIT
> select SYS_DISABLE_DCACHE_OPS
> select BINMAN
> diff --git a/board/ti/am62ax/Kconfig b/board/ti/am62ax/Kconfig
> index 2c18cd49b5d..db3bdc5f35c 100644
> --- a/board/ti/am62ax/Kconfig
> +++ b/board/ti/am62ax/Kconfig
> @@ -10,7 +10,7 @@ choice
> config TARGET_AM62A7_A53_EVM
> bool "TI K3 based AM62A7 EVM running on A53"
> select ARM64
> - select SOC_K3_AM62A7
> + # select SOC_K3_AM62A7
> imply BOARD
> imply SPL_BOARD
> imply TI_I2C_BOARD_DETECT
> @@ -20,7 +20,7 @@ config TARGET_AM62A7_R5_EVM
> select CPU_V7R
> select SYS_THUMB_BUILD
> select K3_LOAD_SYSFW
> - select SOC_K3_AM62A7
> + # select SOC_K3_AM62A7
> select RAM
> select SPL_RAM
> select K3_DDRSS
> diff --git a/board/ti/am62x/Kconfig b/board/ti/am62x/Kconfig
> index 87fed44df17..090ece3315a 100644
> --- a/board/ti/am62x/Kconfig
> +++ b/board/ti/am62x/Kconfig
> @@ -10,14 +10,14 @@ choice
> config TARGET_AM625_A53_EVM
> bool "TI K3 based AM625 EVM running on A53"
> select ARM64
> - select SOC_K3_AM625
> + # select SOC_K3_AM625
>
> config TARGET_AM625_R5_EVM
> bool "TI K3 based AM625 EVM running on R5"
> select CPU_V7R
> select SYS_THUMB_BUILD
> select K3_LOAD_SYSFW
> - select SOC_K3_AM625
> + # select SOC_K3_AM625
> select RAM
> select SPL_RAM
> select K3_DDRSS
> diff --git a/board/ti/am64x/Kconfig b/board/ti/am64x/Kconfig
> index 8036947e345..f642109686f 100644
> --- a/board/ti/am64x/Kconfig
> +++ b/board/ti/am64x/Kconfig
> @@ -9,7 +9,7 @@ choice
> config TARGET_AM642_A53_EVM
> bool "TI K3 based AM642 EVM running on A53"
> select ARM64
> - select SOC_K3_AM642
> + # select SOC_K3_AM642
> imply BOARD
> imply SPL_BOARD
> imply TI_I2C_BOARD_DETECT
> @@ -19,7 +19,7 @@ config TARGET_AM642_R5_EVM
> select CPU_V7R
> select SYS_THUMB_BUILD
> select K3_LOAD_SYSFW
> - select SOC_K3_AM642
> + # select SOC_K3_AM642
> select RAM
> select SPL_RAM
> select K3_DDRSS
> diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig
> index 4765b13ba0c..dcdc46f0b59 100644
> --- a/board/ti/am65x/Kconfig
> +++ b/board/ti/am65x/Kconfig
> @@ -10,7 +10,7 @@ choice
> config TARGET_AM654_A53_EVM
> bool "TI K3 based AM654 EVM running on A53"
> select ARM64
> - select SOC_K3_AM654
> + # select SOC_K3_AM654
> select SYS_DISABLE_DCACHE_OPS
> select BOARD_LATE_INIT
> imply TI_I2C_BOARD_DETECT
> @@ -19,7 +19,7 @@ config TARGET_AM654_R5_EVM
> bool "TI K3 based AM654 EVM running on R5"
> select CPU_V7R
> select SYS_THUMB_BUILD
> - select SOC_K3_AM654
> + # select SOC_K3_AM654
> select K3_LOAD_SYSFW
> select K3_AM654_DDRSS
> imply SYS_K3_SPL_ATF
> diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
> index d19d30d59ef..f997741fe5a 100644
> --- a/board/ti/j721e/Kconfig
> +++ b/board/ti/j721e/Kconfig
> @@ -10,7 +10,7 @@ choice
> config TARGET_J721E_A72_EVM
> bool "TI K3 based J721E EVM running on A72"
> select ARM64
> - select SOC_K3_J721E
> + # select SOC_K3_J721E
> select BOARD_LATE_INIT
> imply TI_I2C_BOARD_DETECT
> select SYS_DISABLE_DCACHE_OPS
> @@ -19,7 +19,7 @@ config TARGET_J721E_R5_EVM
> bool "TI K3 based J721E EVM running on R5"
> select CPU_V7R
> select SYS_THUMB_BUILD
> - select SOC_K3_J721E
> + # select SOC_K3_J721E
> select K3_LOAD_SYSFW
> select RAM
> select SPL_RAM
> @@ -30,7 +30,7 @@ config TARGET_J721E_R5_EVM
> config TARGET_J7200_A72_EVM
> bool "TI K3 based J7200 EVM running on A72"
> select ARM64
> - select SOC_K3_J721E
> + # select SOC_K3_J721E
> select BOARD_LATE_INIT
> imply TI_I2C_BOARD_DETECT
> select SYS_DISABLE_DCACHE_OPS
> @@ -39,7 +39,7 @@ config TARGET_J7200_R5_EVM
> bool "TI K3 based J7200 EVM running on R5"
> select CPU_V7R
> select SYS_THUMB_BUILD
> - select SOC_K3_J721E
> + # select SOC_K3_J721E
> select K3_LOAD_SYSFW
> select RAM
> select SPL_RAM
> diff --git a/board/ti/j721s2/Kconfig b/board/ti/j721s2/Kconfig
> index 6141798333c..1631778eaed 100644
> --- a/board/ti/j721s2/Kconfig
> +++ b/board/ti/j721s2/Kconfig
> @@ -10,7 +10,7 @@ choice
> config TARGET_J721S2_A72_EVM
> bool "TI K3 based J721S2 EVM running on A72"
> select ARM64
> - select SOC_K3_J721S2
> + # select SOC_K3_J721S2
> select BOARD_LATE_INIT
> imply TI_I2C_BOARD_DETECT
> select SYS_DISABLE_DCACHE_OPS
> @@ -19,7 +19,7 @@ config TARGET_J721S2_R5_EVM
> bool "TI K3 based J721S2 EVM running on R5"
> select CPU_V7R
> select SYS_THUMB_BUILD
> - select SOC_K3_J721S2
> + # select SOC_K3_J721S2
> select K3_LOAD_SYSFW
> select RAM
> select SPL_RAM
This commit will break board support for these K3 devices. Understanding
that choices can't be selected, can we keep this patch on hold till we
can clean it up without breaking anything?
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 4fe2c75de25..b3c1fcaf6e6 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -394,7 +394,7 @@ config CMD_BOOTEFI_HELLO
> for testing that EFI is working at a basic level, and for bringing
> up EFI support on a new architecture.
>
> -source lib/efi_selftest/Kconfig
> +source "lib/efi_selftest/Kconfig"
>
> config CMD_BOOTMENU
> bool "bootmenu"
> @@ -1876,7 +1876,7 @@ config CMD_DNS
>
> config CMD_LINK_LOCAL
> bool "linklocal"
> - select LIB_RAND
> + # select LIB_RAND
> help
> Acquire a network IP address using the link-local protocol
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 09aa97ee8c0..a7409a0cb34 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -57,27 +57,27 @@ config CLK_BOSTON
> Enable this to support the clocks
>
> config SPL_CLK_CCF
> - bool "SPL Common Clock Framework [CCF] support "
> + bool "SPL Common Clock Framework [CCF] support"
> depends on SPL
> help
> Enable this option if you want to (re-)use the Linux kernel's Common
> Clock Framework [CCF] code in U-Boot's SPL.
>
> config SPL_CLK_COMPOSITE_CCF
> - bool "SPL Common Clock Framework [CCF] composite clk support "
> + bool "SPL Common Clock Framework [CCF] composite clk support"
> depends on SPL_CLK_CCF
> help
> Enable this option if you want to (re-)use the Linux kernel's Common
> Clock Framework [CCF] composite code in U-Boot's SPL.
>
> config CLK_CCF
> - bool "Common Clock Framework [CCF] support "
> + bool "Common Clock Framework [CCF] support"
> help
> Enable this option if you want to (re-)use the Linux kernel's Common
> Clock Framework [CCF] code in U-Boot's clock driver.
>
> config CLK_COMPOSITE_CCF
> - bool "Common Clock Framework [CCF] composite clk support "
> + bool "Common Clock Framework [CCF] composite clk support"
> depends on CLK_CCF
> help
> Enable this option if you want to (re-)use the Linux kernel's Common
> @@ -151,7 +151,7 @@ config CLK_OCTEON
> Enable this to support the clocks on Octeon MIPS platforms.
>
> config SANDBOX_CLK_CCF
> - bool "Sandbox Common Clock Framework [CCF] support "
> + bool "Sandbox Common Clock Framework [CCF] support"
> depends on SANDBOX
> select CLK_CCF
> help
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 12ef84ca05c..8b49997030b 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -1,11 +1,11 @@
> menu "Hardware crypto devices"
>
> -source drivers/crypto/hash/Kconfig
> +source "drivers/crypto/hash/Kconfig"
>
> -source drivers/crypto/fsl/Kconfig
> +source "drivers/crypto/fsl/Kconfig"
>
> -source drivers/crypto/aspeed/Kconfig
> +source "drivers/crypto/aspeed/Kconfig"
>
> -source drivers/crypto/nuvoton/Kconfig
> +source "drivers/crypto/nuvoton/Kconfig"
>
> endmenu
> diff --git a/drivers/ddr/imx/imx8ulp/Kconfig b/drivers/ddr/imx/imx8ulp/Kconfig
> index 42848863aae..90407982de9 100644
> --- a/drivers/ddr/imx/imx8ulp/Kconfig
> +++ b/drivers/ddr/imx/imx8ulp/Kconfig
> @@ -5,7 +5,7 @@ config IMX8ULP_DRAM
> bool "imx8m dram"
>
> config IMX8ULP_DRAM_PHY_PLL_BYPASS
> - bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK "
> + bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK"
> depends on IMX8ULP_DRAM
>
> config SAVED_DRAM_TIMING_BASE
> diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
> index 316a8fe27fd..233289c9be8 100644
> --- a/drivers/pinctrl/intel/Kconfig
> +++ b/drivers/pinctrl/intel/Kconfig
> @@ -9,7 +9,7 @@ config INTEL_PINCTRL_DUAL_ROUTE_SUPPORT
> default y
>
> config INTEL_PINCTRL_PADCFG_PADTOL
> - bool n
> + bool
>
> config INTEL_PINCTRL_IOSTANDBY
> bool
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 6213b3c95fa..d7209637479 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -252,7 +252,7 @@ endif
> config USB_EHCI_MSM
> bool "Support for Qualcomm on-chip EHCI USB controller"
> depends on DM_USB
> - select USB_ULPI_VIEWPORT
> + # select USB_ULPI_VIEWPORT
> select MSM8916_USB_PHY
> ---help---
> Enables support for the on-chip EHCI controller on Qualcomm
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 549bd357785..efb0cbccc83 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -389,7 +389,7 @@ config TRACE_EARLY_ADDR
> config CIRCBUF
> bool "Enable circular buffer support"
>
> -source lib/dhry/Kconfig
> +source "lib/dhry/Kconfig"
>
> menu "Security support"
>
> @@ -402,10 +402,10 @@ config AES
> supported by the algorithm but only a 128-bit key is supported at
> present.
>
> -source lib/ecdsa/Kconfig
> -source lib/rsa/Kconfig
> -source lib/crypto/Kconfig
> -source lib/crypt/Kconfig
> +source "lib/ecdsa/Kconfig"
> +source "lib/rsa/Kconfig"
> +source "lib/crypto/Kconfig"
> +source "lib/crypt/Kconfig"
>
> config TPM
> bool "Trusted Platform Module (TPM) Support"
> @@ -1001,9 +1001,9 @@ config SMBIOS_PARSER
> help
> A simple parser for SMBIOS data.
>
> -source lib/efi/Kconfig
> -source lib/efi_loader/Kconfig
> -source lib/optee/Kconfig
> +source "lib/efi/Kconfig"
> +source "lib/efi_loader/Kconfig"
> +source "lib/optee/Kconfig"
>
> config TEST_FDTDEC
> bool "enable fdtdec test"
> @@ -1071,6 +1071,6 @@ endmenu
>
> menu "FWU Multi Bank Updates"
>
> -source lib/fwu_updates/Kconfig
> +source "lib/fwu_updates/Kconfig"
>
> endmenu
--
Thanking You
Neha Malcom Francis
More information about the U-Boot
mailing list