[PATCH v2 1/1] i2c:aspeed:support ast2600 i2c new register mode driver
Ryan Chen
ryan_chen at aspeedtech.com
Mon Jan 30 07:24:56 CET 2023
> -----Original Message-----
> From: Simon Glass <sjg at chromium.org>
> Sent: Tuesday, January 24, 2023 2:44 AM
> To: Ryan Chen <ryan_chen at aspeedtech.com>
> Cc: Heiko Schocher <hs at denx.de>; BMC-SW <BMC-SW at aspeedtech.com>;
> u-boot at lists.denx.de
> Subject: Re: [PATCH v2 1/1] i2c:aspeed:support ast2600 i2c new register mode
> driver
>
> Hi Ryan,
>
> On Fri, 20 Jan 2023 at 17:10, Ryan Chen <ryan_chen at aspeedtech.com> wrote:
> >
> > > -----Original Message-----
> > > From: Simon Glass <sjg at chromium.org>
> > > Sent: Saturday, January 21, 2023 5:58 AM
> > > To: Ryan Chen <ryan_chen at aspeedtech.com>
> > > Cc: Heiko Schocher <hs at denx.de>; BMC-SW
> <BMC-SW at aspeedtech.com>;
> > > u-boot at lists.denx.de
> > > Subject: Re: [PATCH v2 1/1] i2c:aspeed:support ast2600 i2c new
> > > register mode driver
> > >
> > > Hi Ryan,
> > >
> > > On Thu, 19 Jan 2023 at 20:12, Ryan Chen <ryan_chen at aspeedtech.com>
> > > wrote:
> > > >
> > > > Hello Simon,
> > > > Sorry, do you have time to check v2 patch?
> > >
> > > I did not see a change log on it, so was not sure anything was needed?
> > > Were there changes from the previous version?
> >
> > There have cover latter [PATCH v2 0/1]
> > https://www.mail-archive.com/u-boot@lists.denx.de/msg460560.html
>
> You can use patman to produce a change list on each patch, then collate the
> change lists into the cover letter. That way it is easier to put it on the patch,
> which is where I would expect it, while still having the cover letter show all
> changes.
>
> It looks OK to me..but re this one:
>
> ret = uclass_get_device_by_driver(UCLASS_MISC,
> +
> DM_DRIVER_GET(aspeed_i2c_global),
> + &global_dev);
>
> Can you not use the parent device?
Hello Simon,
Thanks your advice. I modify it use function ofnode_get_parent to get parent node address.
And send the PATCHv3
https://www.mail-archive.com/u-boot@lists.denx.de/msg462840.html
>
> Regards,
> Simon
More information about the U-Boot
mailing list