[PATCH u-boot 0/4] mmc: Explain and cleanup partition selection

[Jaehoon Chung]

Hi,

On 4/14/23 06:10, Pali Rohár wrote:
> Some people do not want to read review comments in emails. So put
> comments and explanation into the source code itself; make emmc
> partition selection code more explicit and validate configuration in
> bubt command.

Sorry for too late. 
After applied this patch-set, some board are failed with spl's size overflowed 

The below is one of failed log.

+arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 352 bytes
+make[2]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
+make[1]: *** [Makefile:2049: spl/u-boot-spl] Error 2


Best Regards,
Jaehoon Chung

> 
> Pali Rohár (4):
>   mmc: spl: Make partition choice in
>     default_spl_mmc_emmc_boot_partition() more explicit
>   cmd: mvebu/bubt: Validate EXT_CSD[179] eMMC register in
>     mmc_burn_image()
>   sunxi: eMMC: Add comments explaining mapping between bootpart and
>     mmc_switch_part()
>   board: purism: Use U-Boot mmc function for converting boot part to
>     part access
> 
>  arch/arm/mach-sunxi/board.c    | 12 ++++++++++-
>  board/purism/librem5/librem5.c |  6 +-----
>  cmd/mvebu/bubt.c               | 24 +++++++++++++++++++--
>  common/spl/spl_mmc.c           | 38 +++++++++++++++++++++++++++-------
>  4 files changed, 64 insertions(+), 16 deletions(-)