July 2023 Archives by author
Starting: Sat Jul 1 01:12:36 CEST 2023
Ending: Mon Jul 31 23:48:09 CEST 2023
Messages: 4265
- [PATCH v2 5/6] net: add fastboot TCP documentation and IP6-only mode
Ying-Chun Liu (PaulLiu)
- Aw: [PATCH 21/29] arm: dts: medaitek: convert gmac link mode to 2500base-x
Weijie Gao (高惟杰)
- sipeed maix bit resets every 90 seconds with watchdog enabled
Jaap Aart
- [PATCH] arm64: dts: rockchip: rk3568: Add ODROID-M1 board support
Stefan Agner
- [PATCH] arm64: dts: rockchip: rk3568: Add ODROID-M1 board support
Stefan Agner
- [PATCH 2/2] board: rockchip: Add Hardkernel ODROID-M1
Stefan Agner
- [PATCH 2/2] board: rockchip: Add Hardkernel ODROID-M1
Stefan Agner
- sipeed maix bit resets every 90 seconds with watchdog enabled
Sean Anderson
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Sean Anderson
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Sean Anderson
- [PATCH] clk: scmi: claim the dependency on CONFIG_CLK
Sean Anderson
- [PATCH 1/1] spl: add FIT support to semihosting boot method
Sean Anderson
- [PATCH v4 0/9] spl: Use common function for loading/parsing images
Sean Anderson
- [PATCH v4 1/9] spl: Add generic spl_load function
Sean Anderson
- [PATCH v4 2/9] spl: Convert ext to use spl_load
Sean Anderson
- [PATCH v4 3/9] spl: Convert fat to spl_load
Sean Anderson
- [PATCH v4 4/9] spl: Convert mmc to spl_load
Sean Anderson
- [PATCH v4 5/9] spl: Convert net to spl_load
Sean Anderson
- [PATCH v4 6/9] spl: Convert nor to spl_load
Sean Anderson
- [PATCH v4 7/9] spl: Convert semihosting to spl_load
Sean Anderson
- [PATCH v4 8/9] spl: Convert spi to spl_load
Sean Anderson
- [PATCH v4 9/9] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image
Sean Anderson
- [PATCH v4.1 10/9] spl: Convert NVMe to spl_load
Sean Anderson
- [PATCH v4.1 10/9] spl: Convert NVMe to spl_load
Sean Anderson
- [PATCH v4 1/9] spl: Add generic spl_load function
Sean Anderson
- [PATCH 1/2] configs: enable SEMIHOSTING on qemu_arm64_defconfig
Sean Anderson
- [PATCH 2/2] test: unit test for semihosting
Sean Anderson
- [PATCH] arm: Use builtins for ffs/fls
Sean Anderson
- [PATCH] arm: Use builtins for ffs/fls
Sean Anderson
- [PATCH] arm: Use builtins for ffs/fls
Sean Anderson
- [PATCH] watchdog: ftwdt010: need to reset watchdog in ftwdt010_wdt_start()
Sergei Antonov
- [PATCH] pci: ftpci100: add new driver implementation
Sergei Antonov
- [PATCH] arm: moxa: add nport6600 platform
Sergei Antonov
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Ilias Apalodimas
- [PATCH v2] efi_loader: make efi_delete_handle() follow the EFI spec
Ilias Apalodimas
- [PATCH 1/1] test: avoid function name 'setup'
Ilias Apalodimas
- [PATCH] cmd: Fix a size parameter in test_readonly()
Ilias Apalodimas
- [PATCH v5 02/12] nuvoton: npcm845-evb: Add a newline at the end of file
Ilias Apalodimas
- [PATCH] efi_loader: Fix memory corruption on 32bit systems
Ilias Apalodimas
- [PATCH] efi_loader: Allow also empty capsule to be process
Ilias Apalodimas
- [PATCH] efi_loader: Allow also empty capsule to be process
Ilias Apalodimas
- [PATCH v2] efi_loader: Fix memory corruption on 32bit systems
Ilias Apalodimas
- [PATCH] efi_loader: fix uninitialized variable bug in efi_set_load_options()
Ilias Apalodimas
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Ilias Apalodimas
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Ilias Apalodimas
- [PATCH v16 04/10] arm_ffa: introduce Arm FF-A support
Ilias Apalodimas
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Ilias Apalodimas
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Ilias Apalodimas
- [PATCHv4 0/5] net/lwip: add lwip library for the network stack
Ilias Apalodimas
- [PATCHv4 3/5] net/lwip: add doc/develop/net_lwip.rst
Ilias Apalodimas
- [PATCHv4 1/5] net/lwip: add lwip-external submodule
Ilias Apalodimas
- [PATCHv4 5/5] net/lwip: apps/http: add dns support
Ilias Apalodimas
- [PATCHv4 2/5] net/lwip: add lwip library for the network stack
Ilias Apalodimas
- [PATCH 01/14] bloblist: Update the tag numbering
Ilias Apalodimas
- [PATCH 1/1] efi_loader: device paths for special block devices
Ilias Apalodimas
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Ilias Apalodimas
- [PATCH] efi_loader: Increase default variable store size to 32K
Ilias Apalodimas
- [PATCH] tpm: Add TPM2_GetTestResult command support
Ilias Apalodimas
- [PATCH 1/1] efi_loader: fix invocation of efi_prepare_aligned_image
Ilias Apalodimas
- [PATCH 1/1] efi_selftest: remove superfluous assignments
Ilias Apalodimas
- [PATCH 1/1] efi_loader: out of memory in efi_add_memory_map_pg
Ilias Apalodimas
- [PATCH 1/1] efi_loader: memory leak efi_add_memory_map_pg
Ilias Apalodimas
- [PATCH 1/1] efi_loader: error handling in efi_disk_add_dev
Ilias Apalodimas
- [PATCH 1/1] efi_loader: catch out of memory in file_open
Ilias Apalodimas
- [PATCH v2 1/1] efi_loader: out of memory in efi_mem_carve_out
Ilias Apalodimas
- [PATCH 1/1] efi_loader: error handling in tcg2_hash_pe_image()
Ilias Apalodimas
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Ilias Apalodimas
- [PATCH v2 1/1] efi_loader: overflow in efi_allocate_pages
Ilias Apalodimas
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
Ilias Apalodimas
- [PATCH v2 1/1] efi_loader: error handling in tcg2_hash_pe_image()
Ilias Apalodimas
- [PATCH] net: ksz9477: add support for KSZ9893 GbE switch
SIMON BABY
- [PATCH] arm: dts: imx8m: add OPTEE_LOAD_ADDRESS config and tee.bin
Stefano Babic
- [RESEND PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
Stefano Babic
- [RESEND PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
Stefano Babic
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Stefano Babic
- Pull request: please pull u-boot-imx-20230713
Stefano Babic
- [PATCH 1/3] arm: dts: imx8mm: Sync with Linux 6.3
Stefano Babic
- [PATCH] Add support for SPL MMC load redundant U-Boot
Stefano Babic
- [PATCH] Add support for SPL MMC load redundant U-Boot
Stefano Babic
- [PATCH] x86: Update docs link in bootparam header
Paul Barker
- [PATCH] x86: Update docs link in bootparam header
Paul Barker
- [PATCH v2] x86: Update docs link in bootparam header
Paul Barker
- [PATCH v1 0/5] rockchip: Support OP-TEE binaries in ARM FIT images
Alex Bee
- [PATCH v1 1/5] rockchip: Support OP-TEE for ARM in FIT images created by binman
Alex Bee
- [PATCH v1 2/5] evb-rk3229_defconfig: Drop SPL_STACK_R_MALLOC_SIMPLE_LEN
Alex Bee
- [PATCH v1 3/5] rockchip: RK322x: select SPL_OPTEE_IMAGE
Alex Bee
- [PATCH v1 4/5] rockchip: evb_rk3229: Update/fix README
Alex Bee
- [PATCH v1 5/5] optee: Support Rockchip OPTEE binaries
Alex Bee
- [PATCH v1 4/5] rockchip: evb_rk3229: Update/fix README
Alex Bee
- [PATCH v2 0/5] rockchip: Support OP-TEE binaries in ARM FIT images
Alex Bee
- [PATCH v2 1/5] rockchip: Support OP-TEE for ARM in FIT images created by binman
Alex Bee
- [PATCH v2 2/5] configs: evb-rk3229: Increase SPL_STACK_R_MALLOC_SIMPLE_LEN
Alex Bee
- [PATCH v2 3/5] rockchip: RK322x: Select SPL_OPTEE_IMAGE
Alex Bee
- [PATCH v2 4/5] rockchip: evb_rk3229: Update/fix README
Alex Bee
- [PATCH v2 5/5] optee: Support Rockchip OP-TEE binaries
Alex Bee
- [PATCH v2 5/5] optee: Support Rockchip OP-TEE binaries
Alex Bee
- [PATCH v2] powerpc: Add support for CZ.NIC Turris 1.x routers
Marek Behún
- Securing u-boot: allow only authentic images
Martin van den Berg
- [RESEND PATCH] ARM: dts: stm32: fix display pinmux for stm32f746-disco
Dario Binacchi
- [PATCH] board: stm32mp1: add splash screen on dk2
Dario Binacchi
- [PATCH] board: stm32mp1: add splash screen on dk2
Dario Binacchi
- [PATCH v2] board: stm32mp1: add splash screen on dk2
Dario Binacchi
- [PATCH v2] board: stm32mp1: add splash screen on dk2
Dario Binacchi
- [PATCH] board: stm32mp1: add splash screen with stmicroelectronics logo
Dario Binacchi
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Pierre Bourdon
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Pierre Bourdon
- [PATCH] fwu: mtd: Fix dfu_alt_info generation for 2 images per bank
Jassi Brar
- [PATCH] fwu: Show number of attempts in Trial State
Jassi Brar
- [PATCH] fwu: Allow code to properly decode trial state
Jassi Brar
- [RFC PATCH 2/4] arm: mach-k3: am62: Add timer0 id to the dev list
Bryan Brattlof
- [RFC PATCH 3/4] arm: dts: Fix build of am62a7 dtbs
Bryan Brattlof
- [PATCH] arm: mach-k3: *: dev-data: Update to use ARRAY_SIZE
Bryan Brattlof
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Bryan Brattlof
- [PATCH] ram: k3-ddrss: do not touch ctrl regs during training
Bryan Brattlof
- [PATCH] arm: mach-k3: am62a7: change some prints to debug prints
Bryan Brattlof
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Alexey Brodkin
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Alexey Brodkin
- [PATCH 4/5] CI: Update to gcc-13.1.0
Alexey Brodkin
- [PATCH v1 0/3] Add yavia carrier & rework carrier and display adapter name handling
Andrejs Cainikovs
- [PATCH v1 1/3] toradex: tdx-cfg-block: add yavia carrier cfg block info
Andrejs Cainikovs
- [PATCH v1 2/3] toradex: tdx-cfg-block: rework carrier board name handling
Andrejs Cainikovs
- [PATCH v1 3/3] toradex: tdx-cfg-block: rework display adapter name handling
Andrejs Cainikovs
- [PATCH] cmd: Fix an error code in cmd_mux_find()
Dan Carpenter
- [PATCH] cmd: Fix a size parameter in test_readonly()
Dan Carpenter
- [PATCH] addrmap: Fix off by one in addrmap_set_entry()
Dan Carpenter
- [bug report] cros_ec: Add vstore support
Dan Carpenter
- [PATCH] video: Add parentheses around VNBYTES() macro
Dan Carpenter
- [PATCH] efi_loader: Fix memory corruption on 32bit systems
Dan Carpenter
- [PATCH] cros_ec: Fix an error code is cros_ec_get_sku_id()
Dan Carpenter
- [PATCH] fs: btrfs: Prevent error pointer dereference in list_subvolums()
Dan Carpenter
- [PATCH] fdt: off by one in ofnode_lookup_fdt()
Dan Carpenter
- [PATCH] remoteproc: uclass: Clean up a return
Dan Carpenter
- [PATCH] regulator: preserve error code properly in regulator_list_autoset()
Dan Carpenter
- [bug report] fs: fat: create correct short names
Dan Carpenter
- [PATCH] efi_loader: Fix memory corruption on 32bit systems
Dan Carpenter
- [PATCH v2] efi_loader: Fix memory corruption on 32bit systems
Dan Carpenter
- [PATCH] cmd: pxe_utils: add some missing tabs
Dan Carpenter
- [PATCH] test: unicode: fix a sizeof() vs ARRAY_SIZE() bug
Dan Carpenter
- [PATCH] efi_loader: fix uninitialized variable bug in efi_set_load_options()
Dan Carpenter
- [PATCH] cramfs: clean up some error messages
Dan Carpenter
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Dan Carpenter
- [bug report] bootcount: add a new driver with syscon as backend
Dan Carpenter
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Dan Carpenter
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Dan Carpenter
- [PATCH v2] efi_loader: Fix memory corruption on 32bit systems
Dan Carpenter
- [PATCH] addrmap: Fix off by one in addrmap_set_entry()
Dan Carpenter
- [PATCH] cmd: improve string matching for hex
Dan Carpenter
- [PATCH] expo: allocate correct ammount of memory
Dan Carpenter
- [PATCH] test: fix a couple NULL vs IS_ERR() checks
Dan Carpenter
- [PATCH v3 0/5] Introduce the sysinfo command
Detlev Casanova
- [PATCH v3 1/6] sysinfo: Add IDs for board id and revision
Detlev Casanova
- [PATCH v3 2/6] cmd: Add a sysinfo command
Detlev Casanova
- [PATCH v3 3/6] sysinfo: Add a test
Detlev Casanova
- [PATCH v3 4/6] sysinfo: Add documentation
Detlev Casanova
- [PATCH v3 5/6] sysinfo: rcar3: Use int instead of char for revision
Detlev Casanova
- [PATCH v3 6/6] sysinfo: rcar3: Implement BOARD_ID and BOARD_REV_*
Detlev Casanova
- [PATCH v3 5/6] sysinfo: rcar3: Use int instead of char for revision
Detlev Casanova
- [PATCH v3 4/6] sysinfo: Add documentation
Detlev Casanova
- [PATCH v4 0/6] Introduce the sysinfo command
Detlev Casanova
- [PATCH v4 1/6] sysinfo: Add IDs for board id and revision
Detlev Casanova
- [PATCH v4 2/6] cmd: Add a sysinfo command
Detlev Casanova
- [PATCH v4 3/6] sysinfo: Add a test
Detlev Casanova
- [PATCH v4 4/6] sysinfo: Add documentation
Detlev Casanova
- [PATCH v4 5/6] sysinfo: rcar3: Use int instead of char for revision
Detlev Casanova
- [PATCH v4 6/6] sysinfo: rcar3: Implement BOARD_ID and BOARD_REV_*
Detlev Casanova
- Building and Running UBoot on UBuntu Linux distribution
Ritika Chauhan
- [PATCH 00/18] K3 HS Support along with fixes
Manorit Chawdhry
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Manorit Chawdhry
- [PATCH 02/18] Kconfig: j721s2: Fix the scratchpad base
Manorit Chawdhry
- [PATCH 03/18] board: ti: am64x: am64x.env: set fdtfile env variable
Manorit Chawdhry
- [PATCH 04/18] mach-k3: common: correct the calculations for determining firewalls
Manorit Chawdhry
- [PATCH 05/18] include: j7*_evm.h: Cleanups to be done
Manorit Chawdhry
- [PATCH 06/18] configs: k3: Remove saved environments
Manorit Chawdhry
- [PATCH 07/18] environment: ti: Prefix ARM64 DTB names with directory
Manorit Chawdhry
- [PATCH 08/18] environment: ti: Make get_fdt_mmc common
Manorit Chawdhry
- [PATCH 09/18] configs: Enable setexpr command on TI devices
Manorit Chawdhry
- [PATCH 10/18] arm: k3: Add regex/gsub command handling
Manorit Chawdhry
- [PATCH 11/18] env: Make common bootcmd across all k3 devices
Manorit Chawdhry
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Manorit Chawdhry
- [PATCH 13/18] configs: k3: make consistent bootcmd across all k3 socs
Manorit Chawdhry
- [PATCH 14/18] board: ti: keys: add .key and .crt for fit signature signing
Manorit Chawdhry
- [PATCH 15/18] k3-*-binman: dts: Pack u-boot.dtb instead of soc specific dtb
Manorit Chawdhry
- [PATCH 16/18] lib: Kconfig: k3: Enable SHA512 for fit signature
Manorit Chawdhry
- [PATCH 17/18] Kconfig: Enable FIT_SIGNATURE if ARM64
Manorit Chawdhry
- [PATCH 18/18] configs: am64: Fix booting of fitImage on AM64x
Manorit Chawdhry
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Manorit Chawdhry
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Manorit Chawdhry
- [PATCH 14/18] board: ti: keys: add .key and .crt for fit signature signing
Manorit Chawdhry
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Manorit Chawdhry
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Manorit Chawdhry
- [PATCH 0/5] K3 incremental fixes
Manorit Chawdhry
- [PATCH 1/5] configs: am62x: add SPL_MAX_SIZE back
Manorit Chawdhry
- [PATCH 2/5] configs: am64x_evm_a53_defconfig: remove SYS_SPI_U_BOOT_OFFS
Manorit Chawdhry
- [PATCH 3/5] env: ti: mmc.env: Move mmc related args to common place
Manorit Chawdhry
- [PATCH 4/5] env: ti: mmc.env: Fix overlays directory path
Manorit Chawdhry
- [PATCH 5/5] mach-k3: security: improve the checks around authentication
Manorit Chawdhry
- [PATCH 00/18] K3 HS Support along with fixes
Manorit Chawdhry
- [PATCH 00/18] K3 HS Support along with fixes
Manorit Chawdhry
- [PATCH 1/2] dm: adc: add iMX93 ADC support
Bough Chen
- [PATCH 1/1] dm: adc: imx93-adc depends on ADC (fix boot)
Bough Chen
- [PATCH v1 0/4] Fix rtl8169 compile warning and add a new device ID
Minda Chen
- [PATCH v7 0/4] Add StarFive JH7110 PCIe drvier support
Minda Chen
- [PATCH v7 1/4] i2c: designware: Add CONFIG_ACPIGEN limitation to designware_i2c_pci.c
Minda Chen
- [PATCH v7 2/4] starfive: pci: Add StarFive JH7110 pcie driver
Minda Chen
- [PATCH v7 3/4] configs: starfive-jh7110: Add support for PCIe host driver
Minda Chen
- [PATCH v7 4/4] riscv: dts: starfive: Enable PCIe host controller
Minda Chen
- [PATCH v2 0/4] Fix rtl8169 compile warning and add a new device ID
Minda Chen
- [PATCH v2 1/4] net: rtl8169: Fix compile warning in rtl8169
Minda Chen
- [PATCH v2 2/4] net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
Minda Chen
- [PATCH v2 3/4] net: rtl8169: Add one device ID 0x8161
Minda Chen
- [PATCH v2 4/4] configs: starfive-jh7110: Add CONFIG_RTL8169
Minda Chen
- [PATCH v7 1/4] i2c: designware: Add CONFIG_ACPIGEN limitation to designware_i2c_pci.c
Minda Chen
- [PATCH v7 0/4] Add StarFive JH7110 PCIe drvier support
Minda Chen
- [PATCH v8 1/4] i2c: designware: Add Kconfig for designware_i2c_pci.c
Minda Chen
- [PATCH v8 2/4] starfive: pci: Add StarFive JH7110 pcie driver
Minda Chen
- [PATCH v8 3/4] configs: starfive-jh7110: Add support for PCIe host driver
Minda Chen
- [PATCH v8 4/4] riscv: dts: starfive: Enable PCIe host controller
Minda Chen
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Rick Chen
- [PATCH 17/18] riscv: qemu: Remove out-of-date "riscv, kernel-start" handling
Rick Chen
- [PATCH 15/18] riscv: qemu: Enable PRE_CONSOLE_BUFFER
Rick Chen
- [PATCH 1/1] riscv: sifive: initialize PCI on Unmatched
Rick Chen
- [PATCH v2 1/1] acpi: Add missing RISC-V acpi_table header
Rick Chen
- [PATCH] riscv: Support riscv64 image type
Rick Chen
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Chong, Teik Heng
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Chong, Teik Heng
- [PATCH 2/3] mmc: sdhci-cadence: SD6 Controller support
Jaehoon Chung
- [PATCH] mmc:Remove the legacy mode clock setting operation
Jaehoon Chung
- [PATCH u-boot 0/4] mmc: Explain and cleanup partition selection
Jaehoon Chung
- [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [GIT PULL] Please pull u-boot-pmic next
Jaehoon Chung
- [PATCH v2 1/5] dm: test: Fix partition test to use mmc2
Jaehoon Chung
- [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [PATCH u-boot 0/4] mmc: Explain and cleanup partition selection
Jaehoon Chung
- [PATCH] ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
Jaehoon Chung
- [PATCH u-boot 0/4] mmc: Explain and cleanup partition selection
Jaehoon Chung
- [PATCH] mmc: zynq_sdhci: Dll reset only for ZynqMP platform
Jaehoon Chung
- [PATCH] mmc: zynq_sdhci: Dll reset only for ZynqMP platform
Jaehoon Chung
- [PATCH] mmc:Remove thr legacy mode clock setting operation
Jaehoon Chung
- [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [PATCH 1/3] mmc: sdhci-cadence: Rename functions to SD4 specific
Jaehoon Chung
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Jaehoon Chung
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Jaehoon Chung
- Trying to boot JH7110 RISCV-V CPU from MMC
Jaehoon Chung
- [PATCH 1/2] tools: Fix README file in pyproject.toml of u_boot_pylib.
Maxim Cournoyer
- [PATCH 2/2] tools: Fix package discovery in pyproject.toml of u_boot_pylib.
Maxim Cournoyer
- [PATCH v2] board: stm32mp1: add splash screen on dk2
Patrick DELAUNAY
- [PATCH v2] board: stm32mp1: add splash screen on dk2
Patrick DELAUNAY
- [PATCH] ARM: stm32: Inhibit PDDS because CSTBYDIS is set
Patrick DELAUNAY
- [PATCH] ARM: stm32: Fix OF_LIST on DHCOR
Patrick DELAUNAY
- [PATCH] ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
Patrick DELAUNAY
- [PATCH] cmd: pxe_utils: add some missing tabs
Patrick DELAUNAY
- [PATCH v5] dt-bindings: riscv: deprecate riscv,isa
Palmer Dabbelt
- [PATCH 0/5] ARM: dts: at91: Improve sam9x60-curiosity
Alexander Dahl
- [PATCH 1/5] ARM: dts: at91: sam9x60: Better align with upstream dtsi
Alexander Dahl
- [PATCH 2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
Alexander Dahl
- [PATCH 3/5] ARM: dts: at91: sam9x60: Change i2c compatible
Alexander Dahl
- [PATCH 4/5] ARM: dts: at91: sam9x60-curiosity: Improve alignment with upstream
Alexander Dahl
- [PATCH 5/5] ARM: dts: at91: sam9x60-curiosity: Add raw NAND flash
Alexander Dahl
- [PATCH 3/5] ARM: dts: at91: sam9x60: Change i2c compatible
Alexander Dahl
- [PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Andrew Davis
- [PATCH v1 2/3] arm: mach-k3: am62: Add CTRLMMR_WKUP_JTAG_DEVICE_ID register definition
Andrew Davis
- [PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Andrew Davis
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Andrew Davis
- [PATCH 14/18] board: ti: keys: add .key and .crt for fit signature signing
Andrew Davis
- [PATCH] configs: k2x_evm: Always include FIT loading support
Andrew Davis
- [PATCH] MAINTAINERS: Take maintainership of TI KeyStone2 support
Andrew Davis
- [PATCH 1/2] ti: keystone2: Imply NFS command support
Andrew Davis
- [PATCH 2/2] ti: keystone2: Move common Kconfig selections to under ARCH_KEYSTONE
Andrew Davis
- [PATCH 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Andrew Davis
- [PATCH 2/2] configs: keystone2: Change to using env files
Andrew Davis
- [PATCH 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Andrew Davis
- [PATCH v2 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Andrew Davis
- [PATCH v2 2/2] configs: keystone2: Change to using env files
Andrew Davis
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Andrew Davis
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Andrew Davis
- [PATCH V2 1/3] omap: timer: add ti,am654-timer compatibility
Andrew Davis
- [PATCH v2 1/2] board: ti: am64x: Recognize AM64-HSEVM
Andrew Davis
- [PATCH] board: ti: am62x: Add variable device tree in env
Andrew Davis
- [PATCH] tpm: Add TPM2_GetTestResult command support
Julia Daxenberger
- [PATCH] tpm: Add TPM2_GetTestResult command support
Julia Daxenberger
- [PATCH] ARM: dts: stm32mp: alignment with v6.4
Patrick Delaunay
- [PATCH 1/2] ARM: dts: sm32mp15: remove shmem for scmi-optee
Patrick Delaunay
- [PATCH 2/2] ARM: dts: sm32mp13: remove shmem for scmi-optee
Patrick Delaunay
- [PATCH] board: stm32mp1: add splash screen with stmicroelectronics logo
Patrick Delaunay
- [PATCH] bootstd: Correct 'bpot' typo
Julien Delbergue
- [PATCH] common: Kconfig: Fix CMD_BMP/BMP dependency
Samuel Dionne-Riel
- [EXTERNAL] Re: [PATCH] common: Kconfig: Fix CMD_BMP/BMP dependency
Samuel Dionne-Riel
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- [PATCH] colibri-imx7: Call fdt_increase_size()
Francesco Dolcini
- v2023.07-rc5 regression: Image overlaps SPL
Francesco Dolcini
- [PATCH v1 0/3] arm: mach-k3: am62: Add core number autodetection and fix fdt
Francesco Dolcini
- [PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Francesco Dolcini
- [PATCH v1 2/3] arm: mach-k3: am62: Add CTRLMMR_WKUP_JTAG_DEVICE_ID register definition
Francesco Dolcini
- [PATCH v1 3/3] arm: mach-k3: am62: Fixup CPU core counts in fdt
Francesco Dolcini
- [PATCH v1 2/3] arm: mach-k3: am62: Add CTRLMMR_WKUP_JTAG_DEVICE_ID register definition
Francesco Dolcini
- [PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Francesco Dolcini
- [PATCH v1 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Francesco Dolcini
- [PATCH v2 0/3] arm: mach-k3: am62: Add core number, gpu and pru autodetection FDT fixups
Francesco Dolcini
- [PATCH v2 1/3] arm: k3: Fix ft_system_setup so it can be enabled on any SoC
Francesco Dolcini
- [PATCH v2 2/3] arm: mach-k3: am62: Add CTRLMMR_WKUP_JTAG_DEVICE_ID register definition
Francesco Dolcini
- [PATCH v2 3/3] arm: mach-k3: am62: Fixup CPU core, gpu and pru nodes in fdt
Francesco Dolcini
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Francesco Dolcini
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Francesco Dolcini
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Francesco Dolcini
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Francesco Dolcini
- [PATCH v2] dt-bindings: riscv: deprecate riscv,isa
Ben Dooks
- [PATCH v4] dt-bindings: riscv: deprecate riscv,isa
Conor Dooley
- [PATCH v5] dt-bindings: riscv: deprecate riscv,isa
Conor Dooley
- [PATCH 1/1] doc: U-Boot boot phases
Conor Dooley
- [PATCH] phy: adin: add readext and writeext support for mdio cmd
Nate Drude
- [PATCH 1/2] phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs
Nate Drude
- [PATCH 2/2] dt-bindings: add device tree bindings for mxl-8611x PHY
Nate Drude
- [PATCH 2/2] dt-bindings: add device tree bindings for mxl-8611x PHY
Nate Drude
- [PATCH 2/2] dt-bindings: add device tree bindings for mxl-8611x PHY
Nate Drude
- [PATCH 1/2] phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs
Nate Drude
- [PATCH] cmd: ubi: Fix 'ubi list' command arguments parsing
Dmitry Dunaev
- [PATCH 3/5] m68k: dts: add watchdog node
Angelo Dureghello
- [PATCH 1/5] drivers: watchdog: add mcf watchdog support
Angelo Dureghello
- [PATCH v2 0/5] m68k: add ColdFire watchdog driver
Angelo Dureghello
- [PATCH v2 1/5] drivers: watchdog: add mcf watchdog support
Angelo Dureghello
- [PATCH v2 2/5] m68k: move watchdog functions in mcf_wdt driver
Angelo Dureghello
- [PATCH v2 3/5] m68k: dts: add watchdog node
Angelo Dureghello
- [PATCH v2 4/5] configs: m68k: add watchdog driver
Angelo Dureghello
- [PATCH v2 5/5] MAINTAINERS: add myself as mcf_wdt.c maintainer
Angelo Dureghello
- [PATCH] board: m68k add missing maintainer
Angelo Dureghello
- [PATCH v2 1/5] drivers: watchdog: add mcf watchdog support
Angelo Dureghello
- [PATCH v3 0/5] m68k: add ColdFire watchdog driver
Angelo Dureghello
- [PATCH v3 1/5] drivers: watchdog: add mcf watchdog support
Angelo Dureghello
- [PATCH v3 2/5] m68k: move watchdog functions in mcf_wdt driver
Angelo Dureghello
- [PATCH v3 3/5] m68k: dts: add watchdog node
Angelo Dureghello
- [PATCH v3 4/5] configs: m68k: add watchdog driver
Angelo Dureghello
- [PATCH v3 5/5] MAINTAINERS: add myself as mcf_wdt.c maintainer
Angelo Dureghello
- [PULL] Please pull u-boot-coldfire/master
Angelo Dureghello
- [RFC] riscv: (visionfive2:) device tree binding for riscv_timer
Torsten Duwe
- [PATCH v1 0/5] Make the clock dt-bindings and DT nodes consistent with Linux
Torsten Duwe
- [PATCH 02/20] sunxi: remove CONFIG_MACPWR
Sam Edwards
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Sam Edwards
- [PATCH] i2c: mvtwsi: reset controller if stuck in "bus error" state
Sam Edwards
- [PATCH] sunxi: remove CONFIG_SATAPWR
Sam Edwards
- [PATCH] fs/erofs: Remove an unnecessary assertion
Sam Edwards
- [PATCH 15/20] sunxi: add R528/T113-s3/D1(s) DRAM initialisation code
Sam Edwards
- [RESEND PATCH v5 0/2] imx93: add ADC support
Luca Ellero
- [PATCH 1/2] dm: adc: add iMX93 ADC support
Luca Ellero
- [PATCH 2/2] imx93_evk: defconfig: add adc support
Luca Ellero
- [PATCH v5 0/2 RESEND] imx93: add ADC support
Luca Ellero
- [PATCH 1/2] dm: adc: add iMX93 ADC support
Luca Ellero
- [PATCH 2/2] imx93_evk: defconfig: add adc support
Luca Ellero
- [PATCH] spl: spl_legacy: Fix spl_end address
Fabio Estevam
- [PATCH v2 1/3] sunxi: u-boot-spl.lds: Pass _image_binary_end
Fabio Estevam
- [PATCH v2 2/3] microblaze: u-boot-spl.lds: Pass _image_binary_end
Fabio Estevam
- [PATCH v2 3/3] spl: spl_legacy: Fix spl_end address
Fabio Estevam
- [PATCH v2] ARM: imx: romapi: Fix signed integer bitwise ops misuse
Fabio Estevam
- v2023.07-rc5 regression: Image overlaps SPL
Fabio Estevam
- v2023.07-rc5 regression: Image overlaps SPL
Fabio Estevam
- [PATCH] colibri-imx7: Call fdt_increase_size()
Fabio Estevam
- [PATCH v2] colibri-imx7: Call fdt_increase_size()
Fabio Estevam
- v2023.07-rc5 regression: Image overlaps SPL
Fabio Estevam
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Fabio Estevam
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Fabio Estevam
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Fabio Estevam
- imx8mp: issues getting dtb with pcie enabled to boot
Fabio Estevam
- imx8mp: issues getting dtb with pcie enabled to boot
Fabio Estevam
- [PATCH] imx7d-sdb: Sync devicetree with kernel 6.5-rc1
Fabio Estevam
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Fabio Estevam
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Fabio Estevam
- [PATCH 1/3] mx28evk: Convert to CONFIG_DM_SERIAL
Fabio Estevam
- [PATCH 2/3] mx23evk: Convert to CONFIG_DM_SERIAL
Fabio Estevam
- [PATCH 3/3] mx23_olinuxino: Convert to CONFIG_DM_SERIAL
Fabio Estevam
- [PATCH] mx7dsabresd: Retrieve the second MAC address from fuses
Fabio Estevam
- [PATCH] mxs: Kconfig: Remove TARGET_XFI3 symbol
Fabio Estevam
- patch to submit
Fabio Estevam
- [PATCH 1/1] dm: adc: imx93-adc depends on ADC (fix boot)
Fabio Estevam
- [PATCH] clk: also return NULL for -ENOENT in devm_clk_get_optional functions
Fabio Estevam
- Uboot uefi problem
Mr Academia Euforia
- Uboot uefi problem
Mr Academia Euforia
- [PATCH] ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
Peng Fan
- [GIT PULL] Please pull fsl-qoirq-2023-7-6 for next
Peng Fan
- [GIT PULL] Please pull fsl-qoirq-2023-7-6 for next
Peng Fan
- [PATCH 02/16] board: traverse: ten64: ensure retimer reset is done on new board revisions
Peng Fan
- [PATCH 03/16] board: traverse: ten64: fix DPAA2 (network) DPL corruption issue
Peng Fan
- [PATCH 04/16] board: traverse: ten64: update DPAA2 (network) binary path on sdcards
Peng Fan
- [PATCH 05/16] board: traverse: ten64: specify bootargs for recovery environment
Peng Fan
- [PATCH 06/16] board: traverse: ten64: add NAND based OpenWrt bootcmd
Peng Fan
- [PATCH 07/16] board: ten64: add a bootmenu entries for NAND-based entries
Peng Fan
- [PATCH 08/16] configs: ten64: enable NVME_PCI
Peng Fan
- [PATCH 09/16] board: traverse: ten64: init nvme devices in late boot to ensure bootflow availability
Peng Fan
- [PATCH 11/16] board: traverse: ten64: set serial# to be 'label' MAC
Peng Fan
- [PATCH 12/16] board: ten64: disable watchdog autostart
Peng Fan
- [PATCH 13/16] board: traverse: ten64: adopt standard boot defaults
Peng Fan
- [PATCH 14/16] arch: arm: fsl-layerscape: allow "opt-out" of fsl_setenv_bootcmd
Peng Fan
- [PATCH 15/16] board: ten64: opt out of fsl_setenv_bootcmd
Peng Fan
- [PATCH 16/16] board: ten64: strip extra u-boot compatibles from FDT
Peng Fan
- [PATCH 01/16] board: traverse: ten64: recognize board revision D
Peng Fan
- [PATCH v1 0/5] Make the clock dt-bindings and DT nodes consistent with Linux
Hal Feng
- [PATCH v1 1/5] clk: starfive: jh7110: Separate the PLL driver
Hal Feng
- [PATCH v1 2/5] riscv: dts: jh7110: Add PLL clock controller node
Hal Feng
- [PATCH v1 3/5] riscv: dts: jh7110: Add clock source from PLL
Hal Feng
- [PATCH v1 4/5] dt-bindings: clock: jh7110: Modify clock id to be same with Linux
Hal Feng
- [PATCH v1 5/5] clk: starfive: jh7110: Add of_xlate ops and macros for clock id conversion
Hal Feng
- [PATCH v1 0/5] Make the clock dt-bindings and DT nodes consistent with Linux
Hal Feng
- [PATCH 1/5] imx: imx8mm-beacon: Move environment definition to env file
Adam Ford
- [PATCH 2/5] MAINTAINERS: Add some missing defconfig files to existing entries
Adam Ford
- [PATCH v5 20/23] doc: board: ti: Update documentation for binman flow
Jerome Forissier
- [PATCH v7 00/23] Migration to using binman for bootloader
Jerome Forissier
- [PATCH v1 4/5] rockchip: evb_rk3229: Update/fix README
Jerome Forissier
- [PATCH v5 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v5 01/23] binman: ti-board-config: Add support for TI board config binaries
Neha Malcom Francis
- [PATCH v5 02/23] binman: ti-secure: Add support for TI signing
Neha Malcom Francis
- [PATCH v5 03/23] arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Neha Malcom Francis
- [PATCH v5 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Neha Malcom Francis
- [PATCH v5 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v5 06/23] j7200: yaml: Add J7200 board config files
Neha Malcom Francis
- [PATCH v5 07/23] j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v5 08/23] am65x: yaml: Add AM65x board config files
Neha Malcom Francis
- [PATCH v5 09/23] am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v5 10/23] am64x: yaml: Add board configs for AM64x
Neha Malcom Francis
- [PATCH v5 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Neha Malcom Francis
- [PATCH v5 12/23] j721s2: yaml: Add board configs for J721S2
Neha Malcom Francis
- [PATCH v5 13/23] j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v5 14/23] am62: yaml: Add board configs for AM62
Neha Malcom Francis
- [PATCH v5 15/23] am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v5 16/23] am62a: yaml: Add board configs for AM62ax
Neha Malcom Francis
- [PATCH v5 17/23] am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v5 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Neha Malcom Francis
- [PATCH v5 19/23] k3: tools: config.mk: Update makefile and remove scripts
Neha Malcom Francis
- [PATCH v5 20/23] doc: board: ti: Update documentation for binman flow
Neha Malcom Francis
- [PATCH v5 21/23] binman: Overwrite symlink if it already exists
Neha Malcom Francis
- [PATCH v5 22/23] buildman: Create a requirements.txt file
Neha Malcom Francis
- [PATCH v5 23/23] CI: Make use of buildman requirements.txt
Neha Malcom Francis
- [PATCH v5 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Neha Malcom Francis
- [PATCH v5 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Neha Malcom Francis
- [PATCH v5 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Neha Malcom Francis
- [PATCH v6 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v6 01/23] binman: ti-board-config: Add support for TI board config binaries
Neha Malcom Francis
- [PATCH v6 02/23] binman: ti-secure: Add support for TI signing
Neha Malcom Francis
- [PATCH v6 03/23] arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Neha Malcom Francis
- [PATCH v6 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Neha Malcom Francis
- [PATCH v6 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v6 06/23] j7200: yaml: Add J7200 board config files
Neha Malcom Francis
- [PATCH v6 07/23] j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v6 08/23] am65x: yaml: Add AM65x board config files
Neha Malcom Francis
- [PATCH v6 09/23] am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v6 10/23] am64x: yaml: Add board configs for AM64x
Neha Malcom Francis
- [PATCH v6 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Neha Malcom Francis
- [PATCH v6 12/23] j721s2: yaml: Add board configs for J721S2
Neha Malcom Francis
- [PATCH v6 13/23] j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v6 14/23] am62: yaml: Add board configs for AM62
Neha Malcom Francis
- [PATCH v6 15/23] am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v6 16/23] am62a: yaml: Add board configs for AM62ax
Neha Malcom Francis
- [PATCH v6 17/23] am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v6 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Neha Malcom Francis
- [PATCH v6 19/23] k3: tools: config.mk: Update makefile and remove scripts
Neha Malcom Francis
- [PATCH v6 20/23] doc: board: ti: Update documentation for binman flow
Neha Malcom Francis
- [PATCH v6 21/23] binman: Overwrite symlink if it already exists
Neha Malcom Francis
- [PATCH v6 22/23] buildman: Create a requirements.txt file
Neha Malcom Francis
- [PATCH v6 23/23] CI: Make use of buildman requirements.txt
Neha Malcom Francis
- [PATCH v7 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v7 01/23] binman: ti-board-config: Add support for TI board config binaries
Neha Malcom Francis
- [PATCH v7 02/23] binman: ti-secure: Add support for TI signing
Neha Malcom Francis
- [PATCH v7 03/23] arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Neha Malcom Francis
- [PATCH v7 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Neha Malcom Francis
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 06/23] j7200: yaml: Add J7200 board config files
Neha Malcom Francis
- [PATCH v7 07/23] j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 08/23] am65x: yaml: Add AM65x board config files
Neha Malcom Francis
- [PATCH v7 09/23] am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 10/23] am64x: yaml: Add board configs for AM64x
Neha Malcom Francis
- [PATCH v7 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Neha Malcom Francis
- [PATCH v7 12/23] j721s2: yaml: Add board configs for J721S2
Neha Malcom Francis
- [PATCH v7 13/23] j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v7 14/23] am62: yaml: Add board configs for AM62
Neha Malcom Francis
- [PATCH v7 15/23] am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v7 16/23] am62a: yaml: Add board configs for AM62ax
Neha Malcom Francis
- [PATCH v7 17/23] am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Neha Malcom Francis
- [PATCH v7 19/23] k3: tools: config.mk: Update makefile and remove scripts
Neha Malcom Francis
- [PATCH v7 20/23] doc: board: ti: Update documentation for binman flow
Neha Malcom Francis
- [PATCH v7 21/23] binman: Overwrite symlink if it already exists
Neha Malcom Francis
- [PATCH v7 22/23] buildman: Create a requirements.txt file
Neha Malcom Francis
- [PATCH v7 23/23] CI: Make use of buildman requirements.txt
Neha Malcom Francis
- [PATCH v7 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v7 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v5 15/20] binman: Support simple templates
Neha Malcom Francis
- [PATCH 0/6] binman: Template fixes and improvements
Neha Malcom Francis
- [PATCH v8 00/23] Migration to using binman for bootloader
Neha Malcom Francis
- [PATCH v8 01/23] binman: ti-board-config: Add support for TI board config binaries
Neha Malcom Francis
- [PATCH v8 02/23] binman: ti-secure: Add support for TI signing
Neha Malcom Francis
- [PATCH v8 03/23] arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Neha Malcom Francis
- [PATCH v8 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Neha Malcom Francis
- [PATCH v8 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v8 06/23] j7200: yaml: Add J7200 board config files
Neha Malcom Francis
- [PATCH v8 07/23] j7200: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v8 08/23] am65x: yaml: Add AM65x board config files
Neha Malcom Francis
- [PATCH v8 09/23] am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v8 10/23] am64x: yaml: Add board configs for AM64x
Neha Malcom Francis
- [PATCH v8 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Neha Malcom Francis
- [PATCH v8 12/23] j721s2: yaml: Add board configs for J721S2
Neha Malcom Francis
- [PATCH v8 13/23] j721s2: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v8 14/23] am62: yaml: Add board configs for AM62
Neha Malcom Francis
- [PATCH v8 15/23] am625: dts: binman: Package tiboot3.bin, tispl.bin and u-boot.img
Neha Malcom Francis
- [PATCH v8 16/23] am62a: yaml: Add board configs for AM62ax
Neha Malcom Francis
- [PATCH v8 17/23] am62a: dts: binman: Package tiboot3.bin, tispl.bin, u-boot.img
Neha Malcom Francis
- [PATCH v8 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Neha Malcom Francis
- [PATCH v8 19/23] k3: tools: config.mk: Update makefile and remove scripts
Neha Malcom Francis
- [PATCH v8 20/23] doc: board: ti: Update documentation for binman flow
Neha Malcom Francis
- [PATCH v8 21/23] binman: Overwrite symlink if it already exists
Neha Malcom Francis
- [PATCH v8 22/23] buildman: Create a requirements.txt file
Neha Malcom Francis
- [PATCH v8 23/23] CI: Make use of buildman requirements.txt
Neha Malcom Francis
- [PATCH] doc: ti: Clarify required file names for K3 platforms
Neha Malcom Francis
- [PATCH 01/16] doc: board: ti: Optimize sources references
Neha Malcom Francis
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Neha Malcom Francis
- [PATCH 03/16] doc: board: ti: am65x: Update with boot flow diagram
Neha Malcom Francis
- [PATCH 04/16] doc: board: ti: j721e: Update with boot flow diagram
Neha Malcom Francis
- [PATCH 05/16] doc: board: ti: k3: Reuse build instructions
Neha Malcom Francis
- [PATCH 06/16] doc: board: ti: j7200: Convert the image format to svg
Neha Malcom Francis
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Neha Malcom Francis
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Neha Malcom Francis
- [PATCH 06/16] doc: board: ti: j7200: Convert the image format to svg
Neha Malcom Francis
- [PATCH RFC 0/3] Extending FIT generator node
Neha Malcom Francis
- [PATCH RFC 1/3] tools: binman: Enable getting file from specific directory
Neha Malcom Francis
- [PATCH RFC 2/3] WIP: getting signing nodes to work in FIT generator node
Neha Malcom Francis
- [PATCH RFC 3/3] arm: dts: k3-j721e-binman: Example of using FIT generator
Neha Malcom Francis
- [PATCH RFC 1/3] tools: binman: Enable getting file from specific directory
Neha Malcom Francis
- [PATCH RFC 2/3] WIP: getting signing nodes to work in FIT generator node
Neha Malcom Francis
- [PATCH v1 2/2] net: designware: Add bitbang feature for designware driver
Ramon Fried
- [PATCH v1] net: sun8i-emac: Add support for fixed-link phy
Ramon Fried
- [PATCH 1/2] net: phy: Factor out PHY GPIO reset code
Ramon Fried
- [PATCH 2/2] net: phy: Release PHY from GPIO reset if applicable
Ramon Fried
- [PATCH v1 1/4] net: rtl8169: Fix compile warning in rtl8169 network adapter
Ramon Fried
- [PATCH v1 2/4] net: rtl8169: Fix DMA min aligned compile warning in riscv
Ramon Fried
- [PATCH v1 3/4] net: rtl8169: Add one more device ID
Ramon Fried
- [PATCH] net: ksz9477: add support for KSZ9893 GbE switch
Ramon Fried
- [PATCH v2 01/11] binman: elf: Check for ELF_TOOLS availability and remove extra semicolon
Lukas Funke
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Lukas Funke
- [PATCH v3 00/11] Integrate EFI capsule tasks into u-boot's build flow
Sughosh Ganu
- [PATCH v3 01/11] nuvoton: npcm845-evb: Add a newline at the end of file
Sughosh Ganu
- [PATCH v3 02/11] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v3 03/11] doc: capsule: Document the new mechanism to embed ESL file into dtb
Sughosh Ganu
- [PATCH v3 04/11] tools: mkeficapsule: Add support for parsing capsule params from config file
Sughosh Ganu
- [PATCH v3 05/11] doc: Add documentation to describe capsule config file format
Sughosh Ganu
- [PATCH v3 06/11] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v3 07/11] CI: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v3 08/11] test: py: Setup capsule files for testing
Sughosh Ganu
- [PATCH v3 09/11] test: capsule: Remove public key embed logic from capsule update test
Sughosh Ganu
- [PATCH v3 10/11] sandbox: capsule: Add a config file for generating capsules
Sughosh Ganu
- [PATCH v3 11/11] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH v3 02/11] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v3 06/11] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v3 10/11] sandbox: capsule: Add a config file for generating capsules
Sughosh Ganu
- [PATCH v3 11/11] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH v2 5/8] tools: mkeficapsule: Add support for parsing capsule params from config file
Sughosh Ganu
- [PATCH v4 00/12] Integrate EFI capsule tasks into u-boot's build flow
Sughosh Ganu
- [PATCH v4 01/12] binman: bintool: Build a tool from a list of commands
Sughosh Ganu
- [PATCH v4 02/12] nuvoton: npcm845-evb: Add a newline at the end of file
Sughosh Ganu
- [PATCH v4 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v4 04/12] doc: capsule: Document the new mechanism to embed ESL file into dtb
Sughosh Ganu
- [PATCH v4 05/12] tools: mkeficapsule: Add support for parsing capsule params from config file
Sughosh Ganu
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v4 07/12] doc: Add documentation to highlight capsule generation related updates
Sughosh Ganu
- [PATCH v4 08/12] CI: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v4 09/12] test: py: Setup capsule files for testing
Sughosh Ganu
- [PATCH v4 10/12] test: capsule: Remove public key embed logic from capsule update test
Sughosh Ganu
- [PATCH v4 11/12] sandbox: capsule: Add a config file for generating capsules
Sughosh Ganu
- [PATCH v4 12/12] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH v4 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v4 11/12] sandbox: capsule: Add a config file for generating capsules
Sughosh Ganu
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v4 01/12] binman: bintool: Build a tool from a list of commands
Sughosh Ganu
- [PATCH v4 12/12] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH v4 08/12] CI: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v4 12/12] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH] efi_loader: Allow also empty capsule to be process
Sughosh Ganu
- [PATCH] efi_loader: Allow also empty capsule to be process
Sughosh Ganu
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH] efi_loader: Allow also empty capsule to be process
Sughosh Ganu
- [PATCH v5 00/12] Integrate EFI capsule tasks into u-boot's build flow
Sughosh Ganu
- [PATCH v5 01/12] binman: bintool: Build a tool from a list of commands
Sughosh Ganu
- [PATCH v5 02/12] nuvoton: npcm845-evb: Add a newline at the end of file
Sughosh Ganu
- [PATCH v5 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v5 04/12] doc: capsule: Document the new mechanism to embed ESL file into dtb
Sughosh Ganu
- [PATCH v5 05/12] tools: mkeficapsule: Add support for parsing capsule params from config file
Sughosh Ganu
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v5 07/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Sughosh Ganu
- [PATCH v5 09/12] test: py: Setup capsule files for testing
Sughosh Ganu
- [PATCH v5 10/12] test: capsule: Remove public key embed logic from capsule update test
Sughosh Ganu
- [PATCH v5 11/12] sandbox: capsule: Add a config file for generating capsules
Sughosh Ganu
- [PATCH v5 12/12] sandbox: capsule: Generate capsule related files through binman
Sughosh Ganu
- [PATCH v5 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Sughosh Ganu
- [PATCH v5 09/12] test: py: Setup capsule files for testing
Sughosh Ganu
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Sughosh Ganu
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Sughosh Ganu
- [PATCH v5 10/12] test: capsule: Remove public key embed logic from capsule update test
Sughosh Ganu
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Sughosh Ganu
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Sughosh Ganu
- [PATCH 00/29] Add support for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 01/29] arm: mediatek: retrieve ram_base from dts node for armv8 platform
Weijie Gao
- [PATCH 02/29] board: mediatek: update config headers
Weijie Gao
- [PATCH 03/29] spi: mtk_spim: get spi clk rate only once
Weijie Gao
- [PATCH 04/29] spi: mtk_spim: clear IRQ enable bits
Weijie Gao
- [PATCH 05/29] serial: mtk: initial priv data before using
Weijie Gao
- [PATCH 06/29] reset: mediatek: check malloc return valaue before use
Weijie Gao
- [PATCH 07/29] i2c: mediatek: fix I2C usability for MT7981
Weijie Gao
- [PATCH 08/29] arm: dts: enable i2c support for MediaTek MT7981
Weijie Gao
- [PATCH 09/29] pwm: mtk: add support for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 10/29] clk: mediatek: add clock driver support for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 11/29] reset: mediatek: add reset definition for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 12/29] pinctrl: mediatek: convert most definitions to const
Weijie Gao
- [PATCH 13/29] pinctrl: mediatek: fix the return value in driving configuration functions
Weijie Gao
- [PATCH 14/29] pinctrl: mediatek: add pinmux_set ops support
Weijie Gao
- [PATCH 15/29] pinctrl: mediatek: add pinctrl driver for MT7988 SoC
Weijie Gao
- [PATCH 16/29] net: mediatek: connect switch to PSE only when starting eth is requested
Weijie Gao
- [PATCH 17/29] net: mediatek: optimize the switch reset delay wait time
Weijie Gao
- [PATCH 18/29] net: mediatek: fix direct MDIO clause 45 access via SoC
Weijie Gao
- [PATCH 19/29] net: mediatek: add missing static qualifier
Weijie Gao
- [PATCH 20/29] net: mediatek: add support for SGMII 1Gbps auto-negotiation mode
Weijie Gao
- [PATCH 21/29] arm: dts: medaitek: convert gmac link mode to 2500base-x
Weijie Gao
- [PATCH 22/29] net: mediatek: add support for GMAC/USB3 PHY mux mode for MT7981
Weijie Gao
- [PATCH 23/29] arm: dts: mediatek: add infracfg registers to support GMAC/USB3 Co-PHY
Weijie Gao
- [PATCH 24/29] net: mediatek: add USXGMII support
Weijie Gao
- [PATCH 25/29] net: mediatek: add support for NETSYS v3
Weijie Gao
- [PATCH 26/29] net: mediatek: add support for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 27/29] tools: mtk_image: use uint32_t for ghf header magic and version
Weijie Gao
- [PATCH 28/29] arm: mediatek: add support for MediaTek MT7988 SoC
Weijie Gao
- [PATCH 29/29] board: mediatek: add MT7988 reference boards
Weijie Gao
- [PATCH v1] arm: k3: fix fdt_del_node_path implicit declaration and a missing include
Emanuele Ghidoli
- bugs with EFI "reserved" memory and LMB?
Emanuele Ghidoli
- bugs with EFI "reserved" memory and LMB?
Emanuele Ghidoli
- [PATCH] bootstd: USB devtype detection for script boot
Simon Glass
- [PATCH] bootstd: USB devtype detection for script boot
Simon Glass
- [PATCH 00/58] buildman: Refactor code and correct some pylint warnings
Simon Glass
- [PATCH 01/58] buildman: Tidy up pylint warnings in main
Simon Glass
- [PATCH 02/58] buildman: Convert camel case in control.py
Simon Glass
- [PATCH 03/58] buildman: Fix most pylint warnings in control
Simon Glass
- [PATCH 04/58] buildman: Move full-help processing to main
Simon Glass
- [PATCH 05/58] buildman: Move series calculations into a separate function
Simon Glass
- [PATCH 06/58] buildman: Move fetch-arch code into a separate function
Simon Glass
- [PATCH 07/58] buildman: Move logic for -A up a little
Simon Glass
- [PATCH 08/58] buildman: Drop use of builder in show_actions()
Simon Glass
- [PATCH 09/58] buildman: Move dry-run handling higher in do_buildman()
Simon Glass
- [PATCH 10/58] buildman: Move board-selection code into a function
Simon Glass
- [PATCH 11/58] bulidman: Move more code to determine_series()
Simon Glass
- [PATCH 12/58] buildman: Move Boards-object code into a function
Simon Glass
- [PATCH 13/58] bulidman: Move toolchain handling to a functoin
Simon Glass
- [PATCH 14/58] bulldman: Set up output_dir earlier
Simon Glass
- [PATCH 15/58] buildman: Move output-file setup into one place
Simon Glass
- [PATCH 16/58] buildman: Pass option values to get_action_summary()
Simon Glass
- [PATCH 17/58] buildman: Pass option values to show_actions()
Simon Glass
- [PATCH 18/58] buildman: Build option-adjusting into a function
Simon Glass
- [PATCH 19/58] buildman: Move counting of commits into a function
Simon Glass
- [PATCH 20/58] buildman: Move setting up the output dir into a function
Simon Glass
- [PATCH 21/58] buildman: Move commit numbering into determine_series()
Simon Glass
- [PATCH 22/58] buildman: Avoid too many returns in do_buildman()
Simon Glass
- [PATCH 23/58] buildman: Move remaining builder properties to constructor
Simon Glass
- [PATCH 24/58] buildman: Tweak commits and show_bloat
Simon Glass
- [PATCH 25/58] buildman: Moving running of the builder into a function
Simon Glass
- [PATCH 26/58] buildman: Drop some unnecessary variables
Simon Glass
- [PATCH 27/58] buildman: Adjust show_toolchain_prefix() to not return
Simon Glass
- [PATCH 28/58] buildman: Move checking for make into run_builder()
Simon Glass
- [PATCH 29/58] buildman: Move getting the adjust_cfg into run_builder()
Simon Glass
- [PATCH 30/58] buildman: Use get_alow_missing() directly to avoid var
Simon Glass
- [PATCH 31/58] buildman: Create a function to get number of built commits
Simon Glass
- [PATCH 32/58] buildman: Convert camel case in cmdline.py
Simon Glass
- [PATCH 33/58] buildman: Correct most pylint warnings in cmdline
Simon Glass
- [PATCH 34/58] buildman: Add a test for --boards
Simon Glass
- [PATCH 35/58] buildman: Convert to argparse
Simon Glass
- [PATCH 36/58] buildman: Convert camel case in bsettings.py
Simon Glass
- [PATCH 37/58] buildman: Convert camel case in builder.py
Simon Glass
- [PATCH 38/58] buildman: Split parser creation in two
Simon Glass
- [PATCH 39/58] buildman: Convert camel case in builderthread.py
Simon Glass
- [PATCH 40/58] buildman: Correct most pylint warnings in builderthread
Simon Glass
- [PATCH 41/58] buildman: Export _get_output_dir() to avoid warnings
Simon Glass
- [PATCH 42/58] buildman: Correct invalid use of out_dir variable
Simon Glass
- [PATCH 43/58] buildman: Drop unnecessary assignment of config_out
Simon Glass
- [PATCH 44/58] buildman: Start a function to set up the make arguments
Simon Glass
- [PATCH 45/58] buildman: Move setting of toolchain arguments to _build_args()
Simon Glass
- [PATCH 46/58] buildman: Move more things into _build_args()
Simon Glass
- [PATCH 47/58] buildman: Convert config_out to string IO
Simon Glass
- [PATCH 48/58] buildman: Move reconfigure code into its own function
Simon Glass
- [PATCH 49/58] buildman: Move bulid code into its own function
Simon Glass
- [PATCH 50/58] buildman: Move reading of the done file into a function
Simon Glass
- [PATCH 51/58] buildman: Move code to remove old outputs
Simon Glass
- [PATCH 52/58] buildman: Move code to decide output dirs
Simon Glass
- [PATCH 53/58] buildman: Move checkout code to a separate function
Simon Glass
- [PATCH 54/58] buildman: Create a function to handle config and build
Simon Glass
- [PATCH 55/58] buildman: Avoid passing result into _read_done_file()
Simon Glass
- [PATCH 56/58] buildman: Tidy up reporting of a toolchain error
Simon Glass
- [PATCH 57/58] buildman: Tidy up some comments in builderthread
Simon Glass
- [PATCH 58/58] buildman: Move copy_files() out ot BuilderThread class
Simon Glass
- [PATCH 01/10] Makefile: Add support to generate GZIP compressed raw u-boot binary
Simon Glass
- [PATCH 02/10] spl: Kconfig: Address support for compressed U-BOOT raw binary
Simon Glass
- [PATCH 03/10] rockchip: RAM location for the compressed U-BOOT raw binary
Simon Glass
- [PATCH 05/10] Makefile: Add support to generate LZMA compressed raw u-boot binary
Simon Glass
- [PATCH 06/10] spl: fit: support for booting a LZMA-compressed U-boot raw binary
Simon Glass
- [PATCH 07/10] binman: Add support for u-boot-nodtb.bin.gz as an input binary
Simon Glass
- [PATCH 08/10] rockchip: Add GZIP compressed uboot raw binary to FIT image
Simon Glass
- [PATCH 09/10] binman: Add support for u-boot-nodtb.bin.lzma as an input binary
Simon Glass
- [PATCH v13 04/10] arm_ffa: introduce Arm FF-A support
Simon Glass
- [PATCH 10/12] binman: btool: Add Xilinx Bootgen btool
Simon Glass
- modified UBoot to include I2C communication
Simon Glass
- [PATCH v2 2/3] X86: Add support for distro boot
Simon Glass
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Simon Glass
- [PATCH v2] efi_driver: fix duplicate efiblk#0 issue
Simon Glass
- [PATCH] tpm: Add TPM2_GetTestResult command support
Simon Glass
- [PATCH 08/10] cmd: add scmi command for SCMI firmware
Simon Glass
- [PATCH 09/10] doc: cmd: add documentation for scmi
Simon Glass
- [PATCH 07/10] test: dm: add SCMI base protocol test
Simon Glass
- [PATCH] video: backlight: pwm: avoid integer overflow in duty cycle calculation
Simon Glass
- [PATCH] tests: Fix exception when cleaning up skipped test
Simon Glass
- [PATCH v2 1/5] dm: test: Fix partition test to use mmc2
Simon Glass
- [PATCH v2 2/5] dm: test: Improve partition test error output
Simon Glass
- [PATCH v2 3/5] disk: part: Add API to get partitions with specific driver
Simon Glass
- [PATCH v2 5/5] cmd: mbr: Force DOS driver to be used for verify
Simon Glass
- [PATCH v2 4/5] dm: test: Add test for part_get_info_by_type
Simon Glass
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Simon Glass
- [PATCH 12/12] binman: Support simple templates
Simon Glass
- [PATCH v2 00/60] buildman: Refactor code and correct some pylint warnings
Simon Glass
- [PATCH v2 01/60] buildman: Tidy up pylint warnings in main
Simon Glass
- [PATCH v2 02/60] buildman: Convert camel case in control.py
Simon Glass
- [PATCH v2 03/60] buildman: Fix most pylint warnings in control
Simon Glass
- [PATCH v2 04/60] buildman: Move full-help processing to main
Simon Glass
- [PATCH v2 05/60] buildman: Move series calculations into a separate function
Simon Glass
- [PATCH v2 06/60] buildman: Move fetch-arch code into a separate function
Simon Glass
- [PATCH v2 07/60] buildman: Add a test for the -A option
Simon Glass
- [PATCH v2 08/60] buildman: Drop use of builder in show_actions()
Simon Glass
- [PATCH v2 09/60] buildman: Move dry-run handling higher in do_buildman()
Simon Glass
- [PATCH v2 10/60] buildman: Move board-selection code into a function
Simon Glass
- [PATCH v2 11/60] bulidman: Move more code to determine_series()
Simon Glass
- [PATCH v2 12/60] buildman: Move Boards-object code into a function
Simon Glass
- [PATCH v2 13/60] bulidman: Move toolchain handling to a function
Simon Glass
- [PATCH v2 14/60] bulldman: Set up output_dir earlier
Simon Glass
- [PATCH v2 15/60] buildman: Move output-file setup into one place
Simon Glass
- [PATCH v2 16/60] buildman: Pass option values to get_action_summary()
Simon Glass
- [PATCH v2 17/60] buildman: Pass option values to show_actions()
Simon Glass
- [PATCH v2 18/60] buildman: Build option-adjusting into a function
Simon Glass
- [PATCH v2 19/60] buildman: Move counting of commits into a function
Simon Glass
- [PATCH v2 20/60] buildman: Move setting up the output dir into a function
Simon Glass
- [PATCH v2 21/60] buildman: Move commit numbering into determine_series()
Simon Glass
- [PATCH v2 22/60] buildman: Avoid too many returns in do_buildman()
Simon Glass
- [PATCH v2 23/60] buildman: Move remaining builder properties to constructor
Simon Glass
- [PATCH v2 24/60] buildman: Tweak commits and show_bloat
Simon Glass
- [PATCH v2 25/60] buildman: Moving running of the builder into a function
Simon Glass
- [PATCH v2 26/60] buildman: Drop some unnecessary variables
Simon Glass
- [PATCH v2 27/60] buildman: Adjust show_toolchain_prefix() to not return
Simon Glass
- [PATCH v2 28/60] buildman: Move checking for make into run_builder()
Simon Glass
- [PATCH v2 29/60] buildman: Move getting the adjust_cfg into run_builder()
Simon Glass
- [PATCH v2 30/60] buildman: Use get_alow_missing() directly to avoid var
Simon Glass
- [PATCH v2 31/60] buildman: Create a function to get number of built commits
Simon Glass
- [PATCH v2 32/60] buildman: Convert camel case in cmdline.py
Simon Glass
- [PATCH v2 33/60] buildman: Correct most pylint warnings in cmdline
Simon Glass
- [PATCH v2 34/60] buildman: Add a test for --boards
Simon Glass
- [PATCH v2 35/60] buildman: Convert to argparse
Simon Glass
- [PATCH v2 36/60] buildman: Convert camel case in bsettings.py
Simon Glass
- [PATCH v2 37/60] buildman: Convert camel case in builder.py
Simon Glass
- [PATCH v2 38/60] buildman: Split parser creation in two
Simon Glass
- [PATCH v2 39/60] buildman: Convert camel case in builderthread.py
Simon Glass
- [PATCH v2 40/60] buildman: Correct most pylint warnings in builderthread
Simon Glass
- [PATCH v2 41/60] buildman: Export _get_output_dir() to avoid warnings
Simon Glass
- [PATCH v2 42/60] buildman: Correct invalid use of out_dir variable
Simon Glass
- [PATCH v2 43/60] buildman: Drop unnecessary assignment of config_out
Simon Glass
- [PATCH v2 44/60] buildman: Start a function to set up the make arguments
Simon Glass
- [PATCH v2 45/60] buildman: Move setting of toolchain arguments to _build_args()
Simon Glass
- [PATCH v2 46/60] buildman: Move more things into _build_args()
Simon Glass
- [PATCH v2 47/60] buildman: Convert config_out to string IO
Simon Glass
- [PATCH v2 48/60] buildman: Move reconfigure code into its own function
Simon Glass
- [PATCH v2 49/60] buildman: Move bulid code into its own function
Simon Glass
- [PATCH v2 50/60] buildman: Move reading of the done file into a function
Simon Glass
- [PATCH v2 51/60] buildman: Move code to remove old outputs
Simon Glass
- [PATCH v2 52/60] buildman: Move code to decide output dirs
Simon Glass
- [PATCH v2 53/60] buildman: Move checkout code to a separate function
Simon Glass
- [PATCH v2 54/60] buildman: Create a function to handle config and build
Simon Glass
- [PATCH v2 55/60] buildman: Avoid passing result into _read_done_file()
Simon Glass
- [PATCH v2 56/60] buildman: Tidy up reporting of a toolchain error
Simon Glass
- [PATCH v2 57/60] buildman: Tidy up some comments in builderthread
Simon Glass
- [PATCH v2 58/60] buildman: Move copy_files() out ot BuilderThread class
Simon Glass
- [PATCH v2 59/60] buildman: Add a way to print the architecture for a board
Simon Glass
- [PATCH v2 60/60] buildman: Enable test coverage
Simon Glass
- [PATCH] lzma: Fix decompression speed regression
Simon Glass
- [PATCHv3 1/3] net/lwip: add lwip-external submodule
Simon Glass
- [PATCHv3 3/3] net/lwip: add doc/develop/net_lwip.rst
Simon Glass
- [PATCH v2] fpga: add inline stub for fpga_load
Simon Glass
- [PATCH] tpm: Add TPM2_GetTestResult command support
Simon Glass
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Simon Glass
- v2023.07-rc5 regression: Image overlaps SPL
Simon Glass
- [PATCH] binman: Support templating with multiple images
Simon Glass
- [PATCH 12/12] binman: Support simple templates
Simon Glass
- [PATCH] binman: Support templating with multiple images
Simon Glass
- [PATCH 12/12] binman: Support simple templates
Simon Glass
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Simon Glass
- [PATCH v14 07/11] arm_ffa: introduce sandbox FF-A support
Simon Glass
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Simon Glass
- [PATCH v2 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [PATCH v2 2/3] binman: Allow cipher node as special section
Simon Glass
- [PATCH v2 3/3] binman: Add tests for etype encrypted
Simon Glass
- [PATCH v2 01/11] binman: elf: Check for ELF_TOOLS availability and remove extra semicolon
Simon Glass
- [PATCH v2 10/11] binman: ftest: Add test for xilinx_fsbl_auth etype
Simon Glass
- [PATCH v2 09/11] binman: btool: Add Xilinx Bootgen btool
Simon Glass
- [PATCH v2 11/11] binman: etype: Add xilinx_fsbl_auth etype
Simon Glass
- [PATCH v5 03/23] arm: dts: k3: Add support for packaging sysfw.itb and tiboot3.bin
Simon Glass
- [PATCH v5 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Simon Glass
- [PATCH v5 21/23] binman: Overwrite symlink if it already exists
Simon Glass
- [PATCH v5 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Simon Glass
- [PATCH 12/12] binman: Support simple templates
Simon Glass
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Simon Glass
- [PATCH v2 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Simon Glass
- [PATCH 07/10] test: dm: add SCMI base protocol test
Simon Glass
- [PATCH v2] efi_driver: fix duplicate efiblk#0 issue
Simon Glass
- [PATCH 08/10] cmd: add scmi command for SCMI firmware
Simon Glass
- [PATCH 09/10] doc: cmd: add documentation for scmi
Simon Glass
- [PATCH] env: Fix default environment saving issue
Simon Glass
- [PATCH 12/12] binman: Support simple templates
Simon Glass
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Simon Glass
- imx8mp: issues getting dtb with pcie enabled to boot
Simon Glass
- [PATCH] tools/docker: Dockerfile: Don't specify dtc submodule
Simon Glass
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Simon Glass
- [PATCH 1/2] tools: Fix README file in pyproject.toml of u_boot_pylib.
Simon Glass
- [PATCH 2/2] tools: Fix package discovery in pyproject.toml of u_boot_pylib.
Simon Glass
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH v3 01/19] binman: Correct coverage gap in control
Simon Glass
- [PATCH v3 02/19] binman: Init align_default in entry_Section
Simon Glass
- [PATCH v3 03/19] binman: Use GetEntries() to obtain section contents
Simon Glass
- [PATCH v3 04/19] binman: Read _multiple_data_files in the correct place
Simon Glass
- [PATCH v3 05/19] binman: Allow disabling symbol writing
Simon Glass
- [PATCH v3 06/19] stm32mp15: Avoid writing symbols in SPL
Simon Glass
- [PATCH v3 07/19] binman: Update elf to return number of written symbols
Simon Glass
- [PATCH v3 08/19] binman: Add more detail on how ObtainContents() works
Simon Glass
- [PATCH v3 09/19] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v3 10/19] binman: Provide a way to specify the fdt-list directly
Simon Glass
- [PATCH v3 11/19] binman: Drop __bss_size variable in bss_data.c
Simon Glass
- [PATCH v3 12/19] binman: Correct handling of zero bss size
Simon Glass
- [PATCH v3 13/19] dtoc: Support copying the contents of a node into another
Simon Glass
- [PATCH v3 14/19] dtoc: Allow inserting a list of nodes into another
Simon Glass
- [PATCH v3 15/19] binman: Support simple templates
Simon Glass
- [PATCH v3 16/19] binman: Support templating with multiple images
Simon Glass
- [PATCH v3 17/19] binman: Add a test for templating in a FIT
Simon Glass
- [PATCH v3 18/19] binman: Support templates at any level
Simon Glass
- [PATCH v3 19/19] binman: Support writing symbols inside a mkimage image
Simon Glass
- [PATCH u-boot 0/3] Revert broken Bootmenu commits
Simon Glass
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Simon Glass
- [PATCH 0/6] nokia_nx51: Attempts to debug keyboard
Simon Glass
- [PATCH 2/6] nokia_rx51: Correct tstc() implementation
Simon Glass
- [PATCH] spl: Add function called after fpga image upload
Simon Glass
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH 0/7] rockchip: veyron: Synchronize changes for veyron boards
Simon Glass
- [RFC PATCH 2/2] board: ti: am65x: Move to using Extension framework
Simon Glass
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Simon Glass
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
Simon Glass
- [PATCH 1/7] rockchip: veyron: Enable RESET driver
Simon Glass
- [PATCH 2/7] rockchip: veyron: Enable building SPI ROM images
Simon Glass
- [PATCH 4/7] rockchip: veyron: Add serial, logging, silent console support
Simon Glass
- [PATCH 3/7] rockchip: veyron: Unify u-boot.dtsi bootph-all fragments
Simon Glass
- [PATCH 5/7] rockchip: veyron: Use TrueType fonts
Simon Glass
- [PATCH 6/7] rockchip: chromebook_jerry: Re-enable MAX98090 codec driver
Simon Glass
- [PATCH 7/7] rockchip: chromebook_speedy: Enable sound
Simon Glass
- [PATCH v3 01/11] nuvoton: npcm845-evb: Add a newline at the end of file
Simon Glass
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Simon Glass
- [PATCH v4 2/3] binman: Allow cipher node as special section
Simon Glass
- [PATCH v4 3/3] binman: Add tests for etype encrypted
Simon Glass
- [PATCH 07/10] test: dm: add SCMI base protocol test
Simon Glass
- [PATCH v3 09/19] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v2 01/11] binman: elf: Check for ELF_TOOLS availability and remove extra semicolon
Simon Glass
- [PATCH v3 02/11] capsule: authenticate: Add capsule public key in platform's dtb
Simon Glass
- [PATCH v3 03/11] doc: capsule: Document the new mechanism to embed ESL file into dtb
Simon Glass
- [PATCH v3 06/11] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v3 07/11] CI: capsule: Setup the files needed for capsule update testing
Simon Glass
- [PATCH v3 08/11] test: py: Setup capsule files for testing
Simon Glass
- [PATCH v3 09/11] test: capsule: Remove public key embed logic from capsule update test
Simon Glass
- [PATCH v3 10/11] sandbox: capsule: Add a config file for generating capsules
Simon Glass
- [PATCH v3 11/11] sandbox: capsule: Generate capsule related files through binman
Simon Glass
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
Simon Glass
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH v4 00/20] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH v4 01/20] binman: Correct coverage gap in control
Simon Glass
- [PATCH v4 02/20] binman: Init align_default in entry_Section
Simon Glass
- [PATCH v4 03/20] binman: Use GetEntries() to obtain section contents
Simon Glass
- [PATCH v4 04/20] binman: Read _multiple_data_files in the correct place
Simon Glass
- [PATCH v4 05/20] binman: Allow disabling symbol writing
Simon Glass
- [PATCH v4 06/20] stm32mp15: Avoid writing symbols in SPL
Simon Glass
- [PATCH v4 07/20] binman: Update elf to return number of written symbols
Simon Glass
- [PATCH v4 08/20] binman: Add more detail on how ObtainContents() works
Simon Glass
- [PATCH v4 09/20] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v4 10/20] binman: Provide a way to specify the fdt-list directly
Simon Glass
- [PATCH v4 11/20] binman: Drop __bss_size variable in bss_data.c
Simon Glass
- [PATCH v4 12/20] binman: Correct handling of zero bss size
Simon Glass
- [PATCH v4 13/20] dtoc: Support copying the contents of a node into another
Simon Glass
- [PATCH v4 14/20] dtoc: Allow inserting a list of nodes into another
Simon Glass
- [PATCH v4 15/20] binman: Support simple templates
Simon Glass
- [PATCH v4 16/20] binman: Support templating with multiple images
Simon Glass
- [PATCH v4 17/20] binman: Add a test for templating in a FIT
Simon Glass
- [PATCH v4 18/20] binman: Support templates at any level
Simon Glass
- [PATCH v4 19/20] binman: Support writing symbols inside a mkimage image
Simon Glass
- [PATCH v4 20/20] binman: Reduce state.SetInt and bintool cmd to debug level
Simon Glass
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH] Makefile: Add missing quotes around sort --field-separator
Simon Glass
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
Simon Glass
- [PATCH v2] event: Add fpga load event
Simon Glass
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Simon Glass
- [PATCH v3 11/11] sandbox: capsule: Generate capsule related files through binman
Simon Glass
- [PATCH v3 06/11] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v3 10/11] sandbox: capsule: Add a config file for generating capsules
Simon Glass
- [PATCH v4 09/20] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Simon Glass
- [PATCH v4 00/20] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH 1/2] schemas: Add firmware node schema
Simon Glass
- [PATCH 2/2] schemas: Add a schema for binman
Simon Glass
- [PATCH v2 0/3] rpi: Convert to standard boot
Simon Glass
- [PATCH] bdinfo: Correct use of assertions
Simon Glass
- [PATCH] bdinfo: Correct use of assertions
Simon Glass
- [PATCH v2] bdinfo: Correct use of assertions
Simon Glass
- [PATCH] disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS
Simon Glass
- [PATCH] CI: Add automatic retry for test.py jobs
Simon Glass
- [PATCH v3] event: Add fpga load event
Simon Glass
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Simon Glass
- [RFC PATCH 0/3] Minimal platform configuration
Simon Glass
- [PATCH v2 18/19] x86: coreboot: Adjust various config options
Simon Glass
- [PATCH v2 07/19] bootstd: Use the bootargs env var for changing the cmdline
Simon Glass
- [PATCH v2 00/19] bootstd: Add a bootmeth for ChromiumOS on x86
Simon Glass
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Simon Glass
- [PATCH] fdt: cmd: allow to add chosen properties
Simon Glass
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Simon Glass
- [PATCH v3 01/18] test: Skip flat-tree tests if devicetree is not used
Simon Glass
- [PATCH v3 02/18] bootstd: Correct the name of the QEMU bootmeth
Simon Glass
- [PATCH v3 03/18] bootstd: Use bootdev instead of bootdevice
Simon Glass
- [PATCH v3 04/18] bootstd: Correct baudrate typo
Simon Glass
- [PATCH v3 05/18] bootstd: Allow storing the OS command line in the bootflow
Simon Glass
- [PATCH v3 06/18] bootstd: Use the bootargs env var for changing the cmdline
Simon Glass
- [PATCH v3 07/18] bootstd: Allow storing x86 setup information
Simon Glass
- [PATCH v3 08/18] bdinfo: Show information about the serial port
Simon Glass
- [PATCH v3 09/18] bootstd: Add a function to update a command line
Simon Glass
- [PATCH v3 10/18] bootstd: Add support for updating elements of the cmdline
Simon Glass
- [PATCH v3 11/18] x86: qemu: Create a little more room for U-Boot
Simon Glass
- [PATCH v3 12/18] x86: qemu: Switch to standard boot
Simon Glass
- [PATCH v3 13/18] bootstd: Support automatically setting Linux parameters
Simon Glass
- [PATCH v3 14/18] x86: Add a function to boot a zimage
Simon Glass
- [PATCH v3 15/18] x86: zimage: Export the function to obtain the cmdline
Simon Glass
- [PATCH v3 16/18] bootstd: Add a simple bootmeth for ChromiumOS
Simon Glass
- [PATCH v3 17/18] x86: coreboot: Adjust various config options
Simon Glass
- [PATCH v3 18/18] x86: coral: Adjust various config options
Simon Glass
- [PATCH v4 01/45] x86: Return mtrr_add_request() to its old purpose
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH] dm: core: Deal with __symbols__ in devicetree
Simon Glass
- Please pull u-boot-dm
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH] CI: Add automatic retry for test.py jobs
Simon Glass
- [PATCH] Azure: Add excludes to the imx8_imx9 job
Simon Glass
- [PATCH v6 21/23] binman: Overwrite symlink if it already exists
Simon Glass
- [PATCH v2] xilinx: board: Add support to pick bootscr address from DT
Simon Glass
- [PATCH] cyclic: Add ratelimiting schedule() via CYCLIC_RATELIMIT_US
Simon Glass
- [PATCH 2/2] CI: Update to the latest "Jammy" tag
Simon Glass
- [PATCH] CI: Add automatic retry for test.py jobs
Simon Glass
- [PATCH 1/2] schemas: Add firmware node schema
Simon Glass
- [PATCH 4/5] CI: Update to gcc-13.1.0
Simon Glass
- [PATCH v2] xilinx: board: Add support to pick bootscr address from DT
Simon Glass
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Simon Glass
- [PATCH 15/18] k3-*-binman: dts: Pack u-boot.dtb instead of soc specific dtb
Simon Glass
- [PATCH 3/5] spl: Correct spl_board_boot_device function prototype
Simon Glass
- [PATCH 5/5] CI: Update to the latest "Jammy" tag
Simon Glass
- [PATCH v5 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [PATCH v5 2/3] binman: Allow cipher node as special section
Simon Glass
- [PATCH v5 3/3] binman: Add tests for etype encrypted
Simon Glass
- [PATCH] CI: Add automatic retry for test.py jobs
Simon Glass
- [RFC PATCH 0/3] Minimal platform configuration
Simon Glass
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Simon Glass
- [PATCH v4 35/45] x86: Record the start and end of the tables
Simon Glass
- [PATCH v4 38/45] x86: link: Support Micron memory
Simon Glass
- [PATCH v4 08/45] x86: Show the CPU physical address size with bdinfo
Simon Glass
- [PATCH v4 27/45] pci: Adjust video BIOS debugging to be SPL-friendly
Simon Glass
- [PATCH v4 29/45] x86: Enable display for QEMU 64-bit
Simon Glass
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Simon Glass
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Simon Glass
- [PATCH] add axp313a support
Simon Glass
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Simon Glass
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v4 08/12] CI: capsule: Setup the files needed for capsule update testing
Simon Glass
- [PATCH v4 11/12] sandbox: capsule: Add a config file for generating capsules
Simon Glass
- [PATCH v4 12/12] sandbox: capsule: Generate capsule related files through binman
Simon Glass
- [PATCH 1/1] test: avoid function name 'setup'
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH v4 01/12] binman: bintool: Build a tool from a list of commands
Simon Glass
- [PATCH v4 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Simon Glass
- [PATCH 07/10] test: dm: add SCMI base protocol test
Simon Glass
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Simon Glass
- [PATCH v3 00/81] buildman: Refactor code and correct some pylint warnings
Simon Glass
- [PATCH v3 01/81] buildman: Fix verboose typo and add comment
Simon Glass
- [PATCH v3 02/81] buildman: Allow --debug to enable debugging
Simon Glass
- [PATCH v3 03/81] buildman: Exit with the return code consistently
Simon Glass
- [PATCH v3 04/81] buildman: Rename the ARM boards
Simon Glass
- [PATCH v3 05/81] buildman: Drop dead code to handle :CONFIG_ construct
Simon Glass
- [PATCH v3 06/81] buildman: Avoid globals in leaf functions
Simon Glass
- [PATCH v3 07/81] buildman: Add a test for Boards.scan_defconfigs()
Simon Glass
- [PATCH v3 08/81] buildman: Add a test for Boards.output_is_new()
Simon Glass
- [PATCH v3 09/81] buildman: Add a partial test for ensure_board_list()
Simon Glass
- [PATCH v3 10/81] buildman: Tidy up common code in parse_file()
Simon Glass
- [PATCH v3 11/81] buildman: Warn about dangling maintainer entries
Simon Glass
- [PATCH v3 12/81] buildman: Refactor target handling in Boards.scan()
Simon Glass
- [PATCH v3 13/81] buildman: Detect boards with multiple CONFIG_TARGETs defined
Simon Glass
- [PATCH v3 14/81] buildman: Detect boards with no CONFIG_TARGET defined
Simon Glass
- [PATCH v3 15/81] buildman: Correct operation of MAINTAINERS N:
Simon Glass
- [PATCH v3 16/81] buildman: Just display a single line for missing maintainers
Simon Glass
- [PATCH v3 17/81] buildman: Add an option to check maintainers
Simon Glass
- [PATCH v3 18/81] buildman: Provide an argument to the -R option
Simon Glass
- [PATCH v3 19/81] buildman: Tidy up pylint warnings in main
Simon Glass
- [PATCH v3 20/81] buildman: Convert camel case in control.py
Simon Glass
- [PATCH v3 21/81] buildman: Fix most pylint warnings in control
Simon Glass
- [PATCH v3 22/81] buildman: Move full-help processing to main
Simon Glass
- [PATCH v3 23/81] buildman: Move series calculations into a separate function
Simon Glass
- [PATCH v3 24/81] buildman: Move fetch-arch code into a separate function
Simon Glass
- [PATCH v3 25/81] buildman: Add a test for the -A option
Simon Glass
- [PATCH v3 26/81] buildman: Drop use of builder in show_actions()
Simon Glass
- [PATCH v3 27/81] buildman: Move dry-run handling higher in do_buildman()
Simon Glass
- [PATCH v3 28/81] buildman: Add tests for excluding things
Simon Glass
- [PATCH v3 29/81] buildman: Move board-selection code into a function
Simon Glass
- [PATCH v3 30/81] bulidman: Move more code to determine_series()
Simon Glass
- [PATCH v3 31/81] buildman: Move Boards-object code into a function
Simon Glass
- [PATCH v3 32/81] bulidman: Move toolchain handling to a function
Simon Glass
- [PATCH v3 33/81] bulldman: Set up output_dir earlier
Simon Glass
- [PATCH v3 34/81] buildman: Move output-file setup into one place
Simon Glass
- [PATCH v3 35/81] buildman: Pass option values to get_action_summary()
Simon Glass
- [PATCH v3 36/81] buildman: Pass option values to show_actions()
Simon Glass
- [PATCH v3 37/81] buildman: Build option-adjusting into a function
Simon Glass
- [PATCH v3 38/81] buildman: Move counting of commits into a function
Simon Glass
- [PATCH v3 39/81] buildman: Move setting up the output dir into a function
Simon Glass
- [PATCH v3 40/81] buildman: Move commit numbering into determine_series()
Simon Glass
- [PATCH v3 41/81] buildman: Avoid too many returns in do_buildman()
Simon Glass
- [PATCH v3 42/81] buildman: Move remaining builder properties to constructor
Simon Glass
- [PATCH v3 43/81] buildman: Tweak commits and show_bloat
Simon Glass
- [PATCH v3 44/81] buildman: Moving running of the builder into a function
Simon Glass
- [PATCH v3 45/81] buildman: Drop some unnecessary variables
Simon Glass
- [PATCH v3 46/81] buildman: Adjust show_toolchain_prefix() to not return
Simon Glass
- [PATCH v3 47/81] buildman: Move checking for make into run_builder()
Simon Glass
- [PATCH v3 48/81] buildman: Move getting the adjust_cfg into run_builder()
Simon Glass
- [PATCH v3 49/81] buildman: Use get_alow_missing() directly to avoid var
Simon Glass
- [PATCH v3 50/81] buildman: Create a function to get number of built commits
Simon Glass
- [PATCH v3 51/81] buildman: Convert camel case in cmdline.py
Simon Glass
- [PATCH v3 52/81] buildman: Correct most pylint warnings in cmdline
Simon Glass
- [PATCH v3 53/81] buildman: Add a test for --boards
Simon Glass
- [PATCH v3 54/81] buildman: Convert to argparse
Simon Glass
- [PATCH v3 55/81] buildman: Convert camel case in bsettings.py
Simon Glass
- [PATCH v3 56/81] buildman: Convert camel case in builder.py
Simon Glass
- [PATCH v3 57/81] buildman: Split parser creation in two
Simon Glass
- [PATCH v3 58/81] buildman: Convert camel case in builderthread.py
Simon Glass
- [PATCH v3 59/81] buildman: Correct most pylint warnings in builderthread
Simon Glass
- [PATCH v3 60/81] buildman: Export _get_output_dir() to avoid warnings
Simon Glass
- [PATCH v3 61/81] buildman: Correct invalid use of out_dir variable
Simon Glass
- [PATCH v3 62/81] buildman: Drop unnecessary assignment of config_out
Simon Glass
- [PATCH v3 63/81] buildman: Start a function to set up the make arguments
Simon Glass
- [PATCH v3 64/81] buildman: Move setting of toolchain arguments to _build_args()
Simon Glass
- [PATCH v3 65/81] buildman: Move more things into _build_args()
Simon Glass
- [PATCH v3 66/81] buildman: Convert config_out to string IO
Simon Glass
- [PATCH v3 67/81] buildman: Move reconfigure code into its own function
Simon Glass
- [PATCH v3 68/81] buildman: Move bulid code into its own function
Simon Glass
- [PATCH v3 69/81] buildman: Move reading of the done file into a function
Simon Glass
- [PATCH v3 70/81] buildman: Move code to remove old outputs
Simon Glass
- [PATCH v3 71/81] buildman: Move code to decide output dirs
Simon Glass
- [PATCH v3 72/81] buildman: Move checkout code to a separate function
Simon Glass
- [PATCH v3 73/81] buildman: Create a function to handle config and build
Simon Glass
- [PATCH v3 74/81] buildman: Avoid passing result into _read_done_file()
Simon Glass
- [PATCH v3 75/81] buildman: Tidy up reporting of a toolchain error
Simon Glass
- [PATCH v3 76/81] buildman: Tidy up some comments in builderthread
Simon Glass
- [PATCH v3 77/81] buildman: Move copy_files() out ot BuilderThread class
Simon Glass
- [PATCH v3 78/81] buildman: Add a way to print the architecture for a board
Simon Glass
- [PATCH v3 79/81] buildman: Use -D for --debug
Simon Glass
- [PATCH v3 80/81] buildman: Add an option to check maintainers and targets
Simon Glass
- [PATCH v3 81/81] buildman: Enable test coverage
Simon Glass
- [PATCH v4 26/45] x86: Init video in SPL if enabled
Simon Glass
- [PATCH v5 00/46] x86: Use qemu-x86_64 to boot EFI installers
Simon Glass
- [PATCH v5 01/46] bdinfo: Add tests for serial settings
Simon Glass
- [PATCH v5 02/46] x86: Return mtrr_add_request() to its old purpose
Simon Glass
- [PATCH v5 03/46] x86: Allow listing MTRRs in SPL
Simon Glass
- [PATCH v5 04/46] x86: mtrr: Add documentation
Simon Glass
- [PATCH v5 05/46] bios_emulator: Add Kconfig and adjust Makefile for SPL
Simon Glass
- [PATCH v5 06/46] bios_emulator: Drop VIDEO_IO_OFFSET
Simon Glass
- [PATCH v5 07/46] x86: Tidy up EFI code in interrupt_init()
Simon Glass
- [PATCH v5 08/46] x86: Add a comment for board_init_f_r_trampoline()
Simon Glass
- [PATCH v5 09/46] x86: Show the CPU physical address size with bdinfo
Simon Glass
- [PATCH v5 10/46] x86: Correct get_sp() implementation for 64-bit
Simon Glass
- [PATCH v5 11/46] x86: Show an error when a BIOS exception occurs
Simon Glass
- [PATCH v5 12/46] acpi: Add a comment to set the acpi tables
Simon Glass
- [PATCH v5 13/46] bdinfo: Show the RAM top and approximate stack pointer
Simon Glass
- [PATCH v5 14/46] part: Allow setting the partition-table type
Simon Glass
- [PATCH v5 15/46] qfw: Show the file address if available
Simon Glass
- [PATCH v5 16/46] log: Tidy up an ambiguous comment
Simon Glass
- [PATCH v5 17/46] qfw: Set the address of the ACPI tables
Simon Glass
- [PATCH v5 18/46] efi: Show all known UUIDs with CONFIG_CMD_EFIDEBUG
Simon Glass
- [PATCH v5 19/46] x86: Improve the trampoline in 64-bit mode
Simon Glass
- [PATCH v5 20/46] bdinfo: Show the malloc base with the bdinfo command
Simon Glass
- [PATCH v5 21/46] nvme: Provide more useful debugging messages
Simon Glass
- [PATCH v5 22/46] pci: Support autoconfig in SPL
Simon Glass
- [PATCH v5 23/46] pci: Allow the video BIOS to work in SPL with QEMU
Simon Glass
- [PATCH v5 24/46] pci: Tidy up logging and reporting for video BIOS
Simon Glass
- [PATCH v5 25/46] x86: Allow video-BIOS code to be built for SPL
Simon Glass
- [PATCH v5 26/46] x86: Pass video settings from SPL to U-Boot proper
Simon Glass
- [PATCH v5 27/46] x86: Ensure SPL banner is only shown once
Simon Glass
- [PATCH v5 28/46] x86: Init video in SPL if enabled
Simon Glass
- [PATCH v5 29/46] pci: Adjust video BIOS debugging to be SPL-friendly
Simon Glass
- [PATCH v5 30/46] pci: Mask the ROM address in case it is already enabled
Simon Glass
- [PATCH v5 31/46] x86: Enable display for QEMU 64-bit
Simon Glass
- [PATCH v5 32/46] x86: Allow logging to be used in SPL reliably
Simon Glass
- [PATCH v5 33/46] fs: fat: Shrink the size of a few strings
Simon Glass
- [PATCH v5 34/46] fs: fat: Support reading from a larger block size
Simon Glass
- [PATCH v5 35/46] x86: Enable useful options for qemu-86_64
Simon Glass
- [PATCH v5 36/46] x86: Refactor table-writing code a little
Simon Glass
- [PATCH v5 37/46] x86: Record the start and end of the tables
Simon Glass
- [PATCH v5 38/46] x86: Convert some debug statements to use logging
Simon Glass
- [PATCH v5 39/46] x86: link: Support Micron memory
Simon Glass
- [PATCH v5 40/46] x86: Make sure that the LPC is active before SDRAM init
Simon Glass
- [PATCH v5 41/46] log: Support outputing function names in SPL
Simon Glass
- [PATCH v5 42/46] sandbox: Correct header order in board file
Simon Glass
- [PATCH v5 43/46] sandbox: Install ACPI tables on startup
Simon Glass
- [PATCH v5 44/46] efi: Use the installed ACPI tables
Simon Glass
- [PATCH v5 45/46] x86: video: Add a driver for QEMU bochs emulation
Simon Glass
- [PATCH v5 46/46] x86: Switch QEMU over to use the bochs driver
Simon Glass
- [PATCH] add axp313a support
Simon Glass
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Simon Glass
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Simon Glass
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Simon Glass
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Simon Glass
- [PATCH v5 00/20] binman: Simple templating feature and mkimage conversion
Simon Glass
- [PATCH v5 01/20] binman: Correct coverage gap in control
Simon Glass
- [PATCH v5 02/20] binman: Init align_default in entry_Section
Simon Glass
- [PATCH v5 03/20] binman: Use GetEntries() to obtain section contents
Simon Glass
- [PATCH v5 04/20] binman: Read _multiple_data_files in the correct place
Simon Glass
- [PATCH v5 05/20] binman: Allow disabling symbol writing
Simon Glass
- [PATCH v5 06/20] stm32mp15: Avoid writing symbols in SPL
Simon Glass
- [PATCH v5 07/20] binman: Update elf to return number of written symbols
Simon Glass
- [PATCH v5 08/20] binman: Add more detail on how ObtainContents() works
Simon Glass
- [PATCH v5 09/20] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v5 10/20] binman: Provide a way to specify the fdt-list directly
Simon Glass
- [PATCH v5 11/20] binman: Drop __bss_size variable in bss_data.c
Simon Glass
- [PATCH v5 12/20] binman: Correct handling of zero bss size
Simon Glass
- [PATCH v5 13/20] dtoc: Support copying the contents of a node into another
Simon Glass
- [PATCH v5 14/20] dtoc: Allow inserting a list of nodes into another
Simon Glass
- [PATCH v5 15/20] binman: Support simple templates
Simon Glass
- [PATCH v5 16/20] binman: Support templating with multiple images
Simon Glass
- [PATCH v5 17/20] binman: Add a test for templating in a FIT
Simon Glass
- [PATCH v5 18/20] binman: Support templates at any level
Simon Glass
- [PATCH v5 19/20] binman: Support writing symbols inside a mkimage image
Simon Glass
- [PATCH v5 20/20] binman: Reduce state.SetInt and bintool cmd to debug level
Simon Glass
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Simon Glass
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Simon Glass
- [PATCH 3/5] m68k: dts: add watchdog node
Simon Glass
- [PATCH v1 1/4] power: regulator: expand basic reference counter onto all uclass
Simon Glass
- [PATCH 01/10] Makefile: Add support to generate GZIP compressed raw u-boot binary
Simon Glass
- [PATCH] arm: sunxi: Correct warning in board_fit_config_name_match
Simon Glass
- [PATCH 1/5] MAINTAINERS: Correct minor mistakes on some file listings
Simon Glass
- [PATCH 2/5] MAINTAINERS: Add some missing defconfig files to existing entries
Simon Glass
- [PATCH 3/5] rockchip: Add MAINTAINERS entry for Radxa Rock 4C+
Simon Glass
- [PATCH 4/5] sunxi: Add MAINTAINERS entry for Lctech Pi F1C200s
Simon Glass
- [PATCH 5/5] MAINTAINERS: Re-order CAAM section
Simon Glass
- Double free on xhci_register failure.
Simon Glass
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Simon Glass
- [PATCH v6 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [PATCH v6 2/3] binman: Allow cipher node as special section
Simon Glass
- [PATCH v6 3/3] binman: Add tests for etype encrypted
Simon Glass
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Simon Glass
- [PATCH V6 07/10] common: spl: spl: Remove video driver
Simon Glass
- [PATCH v4 12/12] sandbox: capsule: Generate capsule related files through binman
Simon Glass
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Simon Glass
- [PATCH v3 09/11] binman: btool: Add Xilinx Bootgen btool
Simon Glass
- [PATCH v3 10/11] binman: ftest: Add test for xilinx_fsbl_auth etype
Simon Glass
- [PATCH v3 11/11] binman: etype: Add xilinx_fsbl_auth etype
Simon Glass
- [PATCH v2 1/7] binman: Update tee-os missing blob help text
Simon Glass
- [PATCH v2 2/7] binman: Update missing optional external blob warning text
Simon Glass
- [PATCH v2 3/7] binman: Report missing external blobs using error level
Simon Glass
- [PATCH v2 5/7] binman: Fix blank line usage for invalid images warning text
Simon Glass
- [PATCH 1/7] arm: Remove more remnants of bcmcygnus
Simon Glass
- [PATCH 2/7] arm: Remove leftover MAINTAINERS files
Simon Glass
- [PATCH 3/7] xes: Remove leftover code
Simon Glass
- [PATCH 4/7] MAINTAINERS: Add a number of "common" directories
Simon Glass
- [PATCH 6/7] MAINTAINERS: Deal with '+' in paths
Simon Glass
- [PATCH 5/7] MAINTAINERS: Fix path typos and similar
Simon Glass
- [PATCH 7/7] MAINTAINERS: Add some missing directories or files
Simon Glass
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Simon Glass
- fdt_high default value causes unbootable kernel due to misalignment
Simon Glass
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Simon Glass
- [PATCH 1/1] part: eliminate part_get_info_by_name_type()
Simon Glass
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Simon Glass
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Simon Glass
- [PATCH v4 1/2] board/km/cent2: add include common.h
Simon Glass
- [PATCH v2 2/6] ramdisk: add ramdisk uclass and driver
Simon Glass
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Simon Glass
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v5 15/20] binman: Support simple templates
Simon Glass
- [PATCH] Azure: Rework our Rockchip jobs slightly
Simon Glass
- [PATCH 1/2] schemas: Add firmware node schema
Simon Glass
- [PATCH v4 00/83] buildman: Refactor code and correct some pylint warnings
Simon Glass
- [PATCH v4 01/83] buildman: Fix verboose typo and add comment
Simon Glass
- [PATCH v4 02/83] buildman: Allow --debug to enable debugging
Simon Glass
- [PATCH v4 03/83] buildman: Exit with the return code consistently
Simon Glass
- [PATCH v4 04/83] buildman: Rename the ARM boards
Simon Glass
- [PATCH v4 05/83] buildman: Drop dead code to handle :CONFIG_ construct
Simon Glass
- [PATCH v4 06/83] buildman: Avoid globals in leaf functions
Simon Glass
- [PATCH v4 07/83] buildman: Add a test for Boards.scan_defconfigs()
Simon Glass
- [PATCH v4 08/83] buildman: Add a test for Boards.output_is_new()
Simon Glass
- [PATCH v4 09/83] buildman: Add a partial test for ensure_board_list()
Simon Glass
- [PATCH v4 10/83] buildman: Tidy up common code in parse_file()
Simon Glass
- [PATCH v4 11/83] buildman: Warn about dangling maintainer entries
Simon Glass
- [PATCH v4 12/83] buildman: Refactor target handling in Boards.scan()
Simon Glass
- [PATCH v4 13/83] buildman: Detect boards with multiple CONFIG_TARGETs defined
Simon Glass
- [PATCH v4 14/83] buildman: Detect boards with no CONFIG_TARGET defined
Simon Glass
- [PATCH v4 15/83] buildman: Correct operation of MAINTAINERS N:
Simon Glass
- [PATCH v4 16/83] buildman: Just display a single line for missing maintainers
Simon Glass
- [PATCH v4 17/83] buildman: Sort the maintainer warnings
Simon Glass
- [PATCH v4 18/83] buildman: Correct logic for missing maintainers
Simon Glass
- [PATCH v4 19/83] buildman: Add an option to check maintainers
Simon Glass
- [PATCH v4 20/83] buildman: Provide an argument to the -R option
Simon Glass
- [PATCH v4 21/83] buildman: Tidy up pylint warnings in main
Simon Glass
- [PATCH v4 22/83] buildman: Convert camel case in control.py
Simon Glass
- [PATCH v4 23/83] buildman: Fix most pylint warnings in control
Simon Glass
- [PATCH v4 24/83] buildman: Move full-help processing to main
Simon Glass
- [PATCH v4 25/83] buildman: Move series calculations into a separate function
Simon Glass
- [PATCH v4 26/83] buildman: Move fetch-arch code into a separate function
Simon Glass
- [PATCH v4 27/83] buildman: Add a test for the -A option
Simon Glass
- [PATCH v4 28/83] buildman: Drop use of builder in show_actions()
Simon Glass
- [PATCH v4 29/83] buildman: Move dry-run handling higher in do_buildman()
Simon Glass
- [PATCH v4 30/83] buildman: Add tests for excluding things
Simon Glass
- [PATCH v4 31/83] buildman: Move board-selection code into a function
Simon Glass
- [PATCH v4 32/83] bulidman: Move more code to determine_series()
Simon Glass
- [PATCH v4 33/83] buildman: Move Boards-object code into a function
Simon Glass
- [PATCH v4 34/83] bulidman: Move toolchain handling to a function
Simon Glass
- [PATCH v4 35/83] bulldman: Set up output_dir earlier
Simon Glass
- [PATCH v4 36/83] buildman: Move output-file setup into one place
Simon Glass
- [PATCH v4 37/83] buildman: Pass option values to get_action_summary()
Simon Glass
- [PATCH v4 38/83] buildman: Pass option values to show_actions()
Simon Glass
- [PATCH v4 39/83] buildman: Build option-adjusting into a function
Simon Glass
- [PATCH v4 40/83] buildman: Move counting of commits into a function
Simon Glass
- [PATCH v4 41/83] buildman: Move setting up the output dir into a function
Simon Glass
- [PATCH v4 42/83] buildman: Move commit numbering into determine_series()
Simon Glass
- [PATCH v4 43/83] buildman: Avoid too many returns in do_buildman()
Simon Glass
- [PATCH v4 44/83] buildman: Move remaining builder properties to constructor
Simon Glass
- [PATCH v4 45/83] buildman: Tweak commits and show_bloat
Simon Glass
- [PATCH v4 46/83] buildman: Moving running of the builder into a function
Simon Glass
- [PATCH v4 47/83] buildman: Drop some unnecessary variables
Simon Glass
- [PATCH v4 48/83] buildman: Adjust show_toolchain_prefix() to not return
Simon Glass
- [PATCH v4 49/83] buildman: Move checking for make into run_builder()
Simon Glass
- [PATCH v4 50/83] buildman: Move getting the adjust_cfg into run_builder()
Simon Glass
- [PATCH v4 51/83] buildman: Use get_alow_missing() directly to avoid var
Simon Glass
- [PATCH v4 52/83] buildman: Create a function to get number of built commits
Simon Glass
- [PATCH v4 53/83] buildman: Convert camel case in cmdline.py
Simon Glass
- [PATCH v4 54/83] buildman: Correct most pylint warnings in cmdline
Simon Glass
- [PATCH v4 55/83] buildman: Add a test for --boards
Simon Glass
- [PATCH v4 56/83] buildman: Convert to argparse
Simon Glass
- [PATCH v4 57/83] buildman: Convert camel case in bsettings.py
Simon Glass
- [PATCH v4 58/83] buildman: Convert camel case in builder.py
Simon Glass
- [PATCH v4 59/83] buildman: Split parser creation in two
Simon Glass
- [PATCH v4 60/83] buildman: Convert camel case in builderthread.py
Simon Glass
- [PATCH v4 61/83] buildman: Correct most pylint warnings in builderthread
Simon Glass
- [PATCH v4 62/83] buildman: Export _get_output_dir() to avoid warnings
Simon Glass
- [PATCH v4 63/83] buildman: Correct invalid use of out_dir variable
Simon Glass
- [PATCH v4 64/83] buildman: Drop unnecessary assignment of config_out
Simon Glass
- [PATCH v4 65/83] buildman: Start a function to set up the make arguments
Simon Glass
- [PATCH v4 66/83] buildman: Move setting of toolchain arguments to _build_args()
Simon Glass
- [PATCH v4 67/83] buildman: Move more things into _build_args()
Simon Glass
- [PATCH v4 68/83] buildman: Convert config_out to string IO
Simon Glass
- [PATCH v4 69/83] buildman: Move reconfigure code into its own function
Simon Glass
- [PATCH v4 70/83] buildman: Move bulid code into its own function
Simon Glass
- [PATCH v4 71/83] buildman: Move reading of the done file into a function
Simon Glass
- [PATCH v4 72/83] buildman: Move code to remove old outputs
Simon Glass
- [PATCH v4 73/83] buildman: Move code to decide output dirs
Simon Glass
- [PATCH v4 74/83] buildman: Move checkout code to a separate function
Simon Glass
- [PATCH v4 75/83] buildman: Create a function to handle config and build
Simon Glass
- [PATCH v4 76/83] buildman: Avoid passing result into _read_done_file()
Simon Glass
- [PATCH v4 77/83] buildman: Tidy up reporting of a toolchain error
Simon Glass
- [PATCH v4 78/83] buildman: Tidy up some comments in builderthread
Simon Glass
- [PATCH v4 79/83] buildman: Move copy_files() out ot BuilderThread class
Simon Glass
- [PATCH v4 80/83] buildman: Add a way to print the architecture for a board
Simon Glass
- [PATCH v4 81/83] buildman: Use -D for --debug
Simon Glass
- [PATCH v4 82/83] buildman: Add an option to check maintainers and targets
Simon Glass
- [PATCH v4 83/83] buildman: Enable test coverage
Simon Glass
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Simon Glass
- fdt_high default value causes unbootable kernel due to misalignment
Simon Glass
- [PATCH] travis-ci: Add m68k M5208EVBE machine
Simon Glass
- [PATCH v2 8/9] power: pmic: tps65910: add TPS65911 PMIC support
Simon Glass
- [PATCH v2 1/7] power: regulator: expand basic reference counter onto all uclass
Simon Glass
- [PATCH v2 3/7] power: regulator-uclass: perform regulator setup inside uclass
Simon Glass
- [PATCH v2 1/9] power: pmic-uclass: implement poweroff ops
Simon Glass
- [PATCH v7 1/4] i2c: designware: Add CONFIG_ACPIGEN limitation to designware_i2c_pci.c
Simon Glass
- [PATCH v2 5/7] power: pmic-uclass: probe every child on pmic_post_probe
Simon Glass
- [PATCH 2/2] schemas: Add a schema for binman
Simon Glass
- [PATCH v2 1/2] schemas: Add firmware node schema
Simon Glass
- [PATCH v2 2/2] schemas: Add a schema for binman
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH v5 15/20] binman: Support simple templates
Simon Glass
- [PATCH 0/6] binman: Template fixes and improvements
Simon Glass
- [PATCH 1/6] binman: Produce a template-file after processing
Simon Glass
- [PATCH 2/6] dtoc: Make properties dirty when purging them
Simon Glass
- [PATCH 3/6] dtoc: Add some debugging when copying nodes
Simon Glass
- [PATCH 4/6] fdt: Allow copying phandles into templates
Simon Glass
- [PATCH 5/6] binman: Remove templates after use
Simon Glass
- [PATCH 6/6] WIP: binman: Support templates containing phandles
Simon Glass
- [PATCH 1/1] spl: boot always fail on CONFIG_SHOW_ERRORS=y
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v2 0/6] binman: Template fixes and improvements
Simon Glass
- [PATCH v2 1/6] binman: Produce a template-file after processing
Simon Glass
- [PATCH v2 2/6] dtoc: Make properties dirty when purging them
Simon Glass
- [PATCH v2 3/6] dtoc: Add some debugging when copying nodes
Simon Glass
- [PATCH v2 4/6] fdt: Allow copying phandles into templates
Simon Glass
- [PATCH v2 5/6] binman: Remove templates after use
Simon Glass
- [PATCH v2 6/6] binman: Support templates containing phandles
Simon Glass
- Strange construct in binman description
Simon Glass
- [PATCH 1/1] doc: update coc/sphinx/requirements.txt
Simon Glass
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Simon Glass
- [PATCH] rockchip: veyron: Enable Winbond SPI flash
Simon Glass
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Simon Glass
- [PATCH] board_f: Cosmetic style fix
Simon Glass
- [PATCH 1/1] efi_loader: simplify dp_fill()
Simon Glass
- [PATCH v2 1/7] power: regulator: expand basic reference counter onto all uclass
Simon Glass
- [PATCH v2 1/6] net: split IP_TCP header into separate IP/IP6 and TCP headers
Simon Glass
- [PATCH v2 2/6] net: prepare existing TCP stack to be reused by IP6
Simon Glass
- [PATCH v2 3/6] net: introduce TCP/IP6 support
Simon Glass
- [PATCH v2 4/6] net: add fastboot TCP6 support
Simon Glass
- [PATCH v2 5/6] net: add fastboot TCP documentation and IP6-only mode
Simon Glass
- [PATCH v2 6/6] net: update net_ip6 from link_local address when eth device is changed
Simon Glass
- [PATCH v8 21/23] binman: Overwrite symlink if it already exists
Simon Glass
- [PATCH 1/1] spl: blk: partition numbers are hexadecimal
Simon Glass
- [PATCH] bootstd: USB devtype detection for script boot
Simon Glass
- [PATCH v5 20/20] binman: Reduce state.SetInt and bintool cmd to debug level
Simon Glass
- [PATCH v5 19/20] binman: Support writing symbols inside a mkimage image
Simon Glass
- [PATCH v5 18/20] binman: Support templates at any level
Simon Glass
- [PATCH v5 17/20] binman: Add a test for templating in a FIT
Simon Glass
- [PATCH v5 15/20] binman: Support simple templates
Simon Glass
- [PATCH v5 16/20] binman: Support templating with multiple images
Simon Glass
- [PATCH v5 14/20] dtoc: Allow inserting a list of nodes into another
Simon Glass
- [PATCH v5 13/20] dtoc: Support copying the contents of a node into another
Simon Glass
- [PATCH v5 12/20] binman: Correct handling of zero bss size
Simon Glass
- [PATCH v5 11/20] binman: Drop __bss_size variable in bss_data.c
Simon Glass
- [PATCH v5 10/20] binman: Provide a way to specify the fdt-list directly
Simon Glass
- [PATCH v5 09/20] binman: Convert mkimage to Entry_section
Simon Glass
- [PATCH v5 08/20] binman: Add more detail on how ObtainContents() works
Simon Glass
- [PATCH v5 07/20] binman: Update elf to return number of written symbols
Simon Glass
- [PATCH v5 05/20] binman: Allow disabling symbol writing
Simon Glass
- [PATCH v5 06/20] stm32mp15: Avoid writing symbols in SPL
Simon Glass
- [PATCH v5 04/20] binman: Read _multiple_data_files in the correct place
Simon Glass
- [PATCH v5 03/20] binman: Use GetEntries() to obtain section contents
Simon Glass
- [PATCH v5 02/20] binman: Init align_default in entry_Section
Simon Glass
- [PATCH 2/2] tools: Fix package discovery in pyproject.toml of u_boot_pylib.
Simon Glass
- [PATCH 1/2] tools: Fix README file in pyproject.toml of u_boot_pylib.
Simon Glass
- [PATCH 1/1] cmd: fix loads, saves on sandbox
Simon Glass
- [PATCH] core: read: fix dev_read_addr_size()
Simon Glass
- [PATCH v2] sandbox: fix a compilation error
Simon Glass
- [PATCH] dm: core: of_access: fix return value in of_property_match_string
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH 09/18] video: bochs: Set the frame buffer size per configuration
Simon Glass
- [PATCH 1/1] spl: initialize PCI before booting from SATA
Simon Glass
- [PATCH 01/18] dm: video: Cosmetic style fix
Simon Glass
- [PATCH 02/18] video: bochs: Drop inclusion of <asm/mtrr.h>
Simon Glass
- [PATCH 03/18] video: bochs: Drop the useless argument of bochs_vga_write()
Simon Glass
- [PATCH 04/18] video: bochs: Avoid using IO instructions to access VGA IO port
Simon Glass
- [PATCH 05/18] video: bochs: Remove the x86 dependency
Simon Glass
- [PATCH 06/18] video: kconfig: Fix wrong text for the PCI default FB size
Simon Glass
- [PATCH 07/18] video: kconfig: Drop the superfluous dependency
Simon Glass
- [PATCH 08/18] video: kconfig: Set default FB size for Bochs
Simon Glass
- [PATCH 11/18] console: kconfig: Drop the redundant VIDEO dependency
Simon Glass
- [PATCH 12/18] console: Make stdio_print_current_devices() static
Simon Glass
- [PATCH 14/18] console: Print out complete stdio device list
Simon Glass
- [PATCH v3 1/7] power: pmic: palmas: support TI TPS65913 PMIC
Simon Glass
- [PATCH v3 2/7] power: pmic: add the base MAX77663 PMIC support
Simon Glass
- [PATCH v3 3/7] power: regulator: max77663: add regulator support
Simon Glass
- [PATCH v3 4/7] power: pmic: add the base TPS80031 PMIC support
Simon Glass
- [PATCH v3 5/7] power: regulator: tps80031: add regulator support
Simon Glass
- [PATCH v3 7/7] power: regulator: tps65911: add regulator support
Simon Glass
- [PATCH v4 1/9] core: read: add dev_read_addr_size_index_ptr function
Simon Glass
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Simon Glass
- [PATCH 0/9] x86: Fixes for distro booting
Simon Glass
- [PATCH 1/9] x86: spl: Drop unwanted debug()
Simon Glass
- [PATCH 2/9] video: Tidy up Makefile rule for video
Simon Glass
- [PATCH 3/9] x86: Run QEMU machine setup in SPL
Simon Glass
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Simon Glass
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH 6/9] x86: Correct copying of BIOS mode information
Simon Glass
- [PATCH 7/9] video: Add a Kconfig option for SPL video handoff
Simon Glass
- [PATCH 8/9] x86: Enable useful options for qemu-86
Simon Glass
- [PATCH 9/9] x86: Update qemu documentation
Simon Glass
- [PATCH 1/1] spl: initialize PCI before booting from SATA
Simon Glass
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Simon Glass
- [PATCH 1/1] doc: fix typo device_compat/.h
Simon Glass
- [PATCH 1/1] doc: describe QEMU emulation of block devices
Simon Glass
- Strange construct in binman description
Simon Glass
- [PATCH] dm: core: Deal with __symbols__ in devicetree
Simon Glass
- [PATCH 1/4] binman: Tidy up tests for pre-load entry type
Simon Glass
- [PATCH 2/4] binman: Renumber 277_rockchip and 278_mkimage test files
Simon Glass
- [PATCH 3/4] binman: Renumber 277...289 TI test files
Simon Glass
- [PATCH 4/4] binman: Add missing ssl documentation
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH 4/4] binman: Add missing ssl documentation
Simon Glass
- [PATCH 3/4] binman: Renumber 277...289 TI test files
Simon Glass
- [PATCH 2/4] binman: Renumber 277_rockchip and 278_mkimage test files
Simon Glass
- [PATCH 1/4] binman: Tidy up tests for pre-load entry type
Simon Glass
- [PATCH v4 83/83] buildman: Enable test coverage
Simon Glass
- [PATCH v4 82/83] buildman: Add an option to check maintainers and targets
Simon Glass
- [PATCH v4 81/83] buildman: Use -D for --debug
Simon Glass
- [PATCH v4 80/83] buildman: Add a way to print the architecture for a board
Simon Glass
- [PATCH v4 79/83] buildman: Move copy_files() out ot BuilderThread class
Simon Glass
- [PATCH v4 78/83] buildman: Tidy up some comments in builderthread
Simon Glass
- [PATCH v4 77/83] buildman: Tidy up reporting of a toolchain error
Simon Glass
- [PATCH v4 76/83] buildman: Avoid passing result into _read_done_file()
Simon Glass
- [PATCH v4 75/83] buildman: Create a function to handle config and build
Simon Glass
- [PATCH v4 73/83] buildman: Move code to decide output dirs
Simon Glass
- [PATCH v4 74/83] buildman: Move checkout code to a separate function
Simon Glass
- [PATCH v4 72/83] buildman: Move code to remove old outputs
Simon Glass
- [PATCH v4 70/83] buildman: Move bulid code into its own function
Simon Glass
- [PATCH v4 71/83] buildman: Move reading of the done file into a function
Simon Glass
- [PATCH v4 69/83] buildman: Move reconfigure code into its own function
Simon Glass
- [PATCH v4 68/83] buildman: Convert config_out to string IO
Simon Glass
- [PATCH v4 67/83] buildman: Move more things into _build_args()
Simon Glass
- [PATCH v4 66/83] buildman: Move setting of toolchain arguments to _build_args()
Simon Glass
- [PATCH v4 65/83] buildman: Start a function to set up the make arguments
Simon Glass
- [PATCH v4 64/83] buildman: Drop unnecessary assignment of config_out
Simon Glass
- [PATCH v4 62/83] buildman: Export _get_output_dir() to avoid warnings
Simon Glass
- [PATCH v4 63/83] buildman: Correct invalid use of out_dir variable
Simon Glass
- [PATCH v4 61/83] buildman: Correct most pylint warnings in builderthread
Simon Glass
- [PATCH v4 60/83] buildman: Convert camel case in builderthread.py
Simon Glass
- [PATCH v4 59/83] buildman: Split parser creation in two
Simon Glass
- [PATCH v4 58/83] buildman: Convert camel case in builder.py
Simon Glass
- [PATCH v4 57/83] buildman: Convert camel case in bsettings.py
Simon Glass
- [PATCH v4 56/83] buildman: Convert to argparse
Simon Glass
- [PATCH v4 55/83] buildman: Add a test for --boards
Simon Glass
- [PATCH v4 54/83] buildman: Correct most pylint warnings in cmdline
Simon Glass
- [PATCH v4 53/83] buildman: Convert camel case in cmdline.py
Simon Glass
- [PATCH v4 52/83] buildman: Create a function to get number of built commits
Simon Glass
- [PATCH v4 50/83] buildman: Move getting the adjust_cfg into run_builder()
Simon Glass
- [PATCH v4 51/83] buildman: Use get_alow_missing() directly to avoid var
Simon Glass
- [PATCH v4 49/83] buildman: Move checking for make into run_builder()
Simon Glass
- [PATCH v4 48/83] buildman: Adjust show_toolchain_prefix() to not return
Simon Glass
- [PATCH v4 47/83] buildman: Drop some unnecessary variables
Simon Glass
- [PATCH v4 46/83] buildman: Moving running of the builder into a function
Simon Glass
- [PATCH v4 45/83] buildman: Tweak commits and show_bloat
Simon Glass
- [PATCH v4 44/83] buildman: Move remaining builder properties to constructor
Simon Glass
- [PATCH v4 42/83] buildman: Move commit numbering into determine_series()
Simon Glass
- [PATCH v4 43/83] buildman: Avoid too many returns in do_buildman()
Simon Glass
- [PATCH v4 41/83] buildman: Move setting up the output dir into a function
Simon Glass
- [PATCH v4 40/83] buildman: Move counting of commits into a function
Simon Glass
- [PATCH v4 38/83] buildman: Pass option values to show_actions()
Simon Glass
- [PATCH v4 39/83] buildman: Build option-adjusting into a function
Simon Glass
- [PATCH v4 37/83] buildman: Pass option values to get_action_summary()
Simon Glass
- [PATCH v4 36/83] buildman: Move output-file setup into one place
Simon Glass
- [PATCH v4 35/83] bulldman: Set up output_dir earlier
Simon Glass
- [PATCH v4 33/83] buildman: Move Boards-object code into a function
Simon Glass
- [PATCH v4 34/83] bulidman: Move toolchain handling to a function
Simon Glass
- [PATCH v4 32/83] bulidman: Move more code to determine_series()
Simon Glass
- [PATCH v4 31/83] buildman: Move board-selection code into a function
Simon Glass
- [PATCH v4 29/83] buildman: Move dry-run handling higher in do_buildman()
Simon Glass
- [PATCH v4 30/83] buildman: Add tests for excluding things
Simon Glass
- [PATCH v4 28/83] buildman: Drop use of builder in show_actions()
Simon Glass
- [PATCH v4 26/83] buildman: Move fetch-arch code into a separate function
Simon Glass
- [PATCH v4 27/83] buildman: Add a test for the -A option
Simon Glass
- [PATCH v4 25/83] buildman: Move series calculations into a separate function
Simon Glass
- [PATCH v4 24/83] buildman: Move full-help processing to main
Simon Glass
- [PATCH v4 23/83] buildman: Fix most pylint warnings in control
Simon Glass
- [PATCH v4 22/83] buildman: Convert camel case in control.py
Simon Glass
- [PATCH v4 21/83] buildman: Tidy up pylint warnings in main
Simon Glass
- [PATCH v4 20/83] buildman: Provide an argument to the -R option
Simon Glass
- [PATCH v4 19/83] buildman: Add an option to check maintainers
Simon Glass
- [PATCH v4 18/83] buildman: Correct logic for missing maintainers
Simon Glass
- [PATCH v4 17/83] buildman: Sort the maintainer warnings
Simon Glass
- [PATCH v4 16/83] buildman: Just display a single line for missing maintainers
Simon Glass
- [PATCH v4 15/83] buildman: Correct operation of MAINTAINERS N:
Simon Glass
- [PATCH v4 13/83] buildman: Detect boards with multiple CONFIG_TARGETs defined
Simon Glass
- [PATCH v4 14/83] buildman: Detect boards with no CONFIG_TARGET defined
Simon Glass
- [PATCH v4 12/83] buildman: Refactor target handling in Boards.scan()
Simon Glass
- [PATCH v4 11/83] buildman: Warn about dangling maintainer entries
Simon Glass
- [PATCH v4 10/83] buildman: Tidy up common code in parse_file()
Simon Glass
- [PATCH v4 09/83] buildman: Add a partial test for ensure_board_list()
Simon Glass
- [PATCH v4 08/83] buildman: Add a test for Boards.output_is_new()
Simon Glass
- [PATCH v4 07/83] buildman: Add a test for Boards.scan_defconfigs()
Simon Glass
- [PATCH v4 06/83] buildman: Avoid globals in leaf functions
Simon Glass
- [PATCH v4 05/83] buildman: Drop dead code to handle :CONFIG_ construct
Simon Glass
- [PATCH v4 04/83] buildman: Rename the ARM boards
Simon Glass
- [PATCH v4 03/83] buildman: Exit with the return code consistently
Simon Glass
- [PATCH v4 02/83] buildman: Allow --debug to enable debugging
Simon Glass
- [PATCH v4 01/83] buildman: Fix verboose typo and add comment
Simon Glass
- [PATCH v3 08/11] binman: doc: Add documentation for Xilinx Bootgen bintool
Simon Glass
- [PATCH v3 07/11] binman: etype: Add u-boot-spl-pubkey-dtb etype
Simon Glass
- [PATCH v3 05/11] binman: ftest: Add test for u_boot_spl_pubkey_dtb
Simon Glass
- [PATCH v3 06/11] binman: btool: Add fdt_add_pubkey as btool
Simon Glass
- [PATCH v3 04/11] binman: doc: Add documentation for fdt_add_pubkey bintool
Simon Glass
- [PATCH v3 03/11] binman: blob_dtb: Add fake_size argument to ObtainContents()
Simon Glass
- [PATCH v3 02/11] binman: Don't decompress data while signing
Simon Glass
- [PATCH v6 3/3] binman: Add tests for etype encrypted
Simon Glass
- [PATCH v6 2/3] binman: Allow cipher node as special section
Simon Glass
- [PATCH v6 1/3] binman: Add support for externally encrypted blobs
Simon Glass
- [PATCH] buildman: Specify the output directory in tests
Simon Glass
- [PATCH v2 1/1] spl: initialize PCI before booting
Simon Glass
- [PATCH] xhci_register: Fix double free on failure
Simon Glass
- rk3588 status
Simon Glass
- rk3588 status
Simon Glass
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Simon Glass
- [PATCH v2 1/1] spl: initialize PCI before booting
Simon Glass
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- getting u-boot to work on raspi 3b (32bit)
Simon Glass
- [PATCH 00/14] bloblist: Align to firmware handoff
Simon Glass
- [PATCH 01/14] bloblist: Update the tag numbering
Simon Glass
- [PATCH 02/14] bloblist: Adjust API to align in powers of 2
Simon Glass
- [PATCH 03/14] bloblist: Change the magic value
Simon Glass
- [PATCH 04/14] bloblist: Set version to 1
Simon Glass
- [PATCH 05/14] bloblist: Access record hdr_size and tag via a function
Simon Glass
- [PATCH 06/14] bloblist: Drop the flags value
Simon Glass
- [PATCH 07/14] bloblist: Drop the spare values
Simon Glass
- [PATCH 08/14] bloblist: Change the checksum algorithm
Simon Glass
- [PATCH 09/14] bloblist: Checksum the entire bloblist
Simon Glass
- [PATCH 10/14] bloblist: Handle alignment with a void entry
Simon Glass
- [PATCH 11/14] bloblist: Reduce blob-header size
Simon Glass
- [PATCH 12/14] bloblist: Reduce bloblist header size
Simon Glass
- [PATCH 13/14] bloblist: Add alignment to bloblist_new()
Simon Glass
- [PATCH 14/14] bloblist: Update documentation and header comment
Simon Glass
- [PATCH] x86: Add a little more info to cbsysinfo
Simon Glass
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v5 01/12] binman: bintool: Build a tool from a list of commands
Simon Glass
- [PATCH v5 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Simon Glass
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Simon Glass
- [PATCH v5 07/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v5 12/12] sandbox: capsule: Generate capsule related files through binman
Simon Glass
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Simon Glass
- [PATCH v2 1/1] spl: initialize PCI before booting
Simon Glass
- [PATCH 2/4] board/freescale: Drop two orphaned entries
Simon Glass
- [u-boot-test-hooks 3/4] bin/writer.ti-omap_mount: Add support for TI OMAP-style platforms via mount
Simon Glass
- [PATCH v5 09/12] test: py: Setup capsule files for testing
Simon Glass
- [PATCH v5 10/12] test: capsule: Remove public key embed logic from capsule update test
Simon Glass
- [PATCH v5 11/12] sandbox: capsule: Add a config file for generating capsules
Simon Glass
- [u-boot-test-hooks 1/4] bin/flash.sdwire_common_mount: Switch to sourcing the next writer script
Simon Glass
- [u-boot-test-hooks 4/4] bin/writer.ti-k3_mount: Add support for TI K3 platforms via mount
Simon Glass
- [u-boot-test-hooks 2/4] bin/writer.rpi*mount: Rework to support all current Pi platforms
Simon Glass
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Simon Glass
- [PATCH v5 09/12] test: py: Setup capsule files for testing
Simon Glass
- [PATCH v5 03/12] capsule: authenticate: Add capsule public key in platform's dtb
Simon Glass
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Simon Glass
- [PATCH v4 06/12] binman: capsule: Add support for generating capsules
Simon Glass
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Simon Glass
- [PATCH v2 2/2] schemas: Add a schema for binman
Simon Glass
- [PATCH] riscv: Support riscv64 image type
Simon Glass
- [PATCH] regulator: preserve error code properly in regulator_list_autoset()
Simon Glass
- [PATCH] cros_ec: Fix an error code is cros_ec_get_sku_id()
Simon Glass
- [PATCH] video: Add parentheses around VNBYTES() macro
Simon Glass
- [PATCH] addrmap: Fix off by one in addrmap_set_entry()
Simon Glass
- Securing u-boot: allow only authentic images
Simon Glass
- [PATCH 1/1] virtio: provide driver name in debug message
Simon Glass
- Building and Running UBoot on UBuntu Linux distribution
Simon Glass
- [PATCH] remoteproc: uclass: Clean up a return
Simon Glass
- [PATCH 4/5] mmc: Use regulator_set_enable_if_allowed
Simon Glass
- [PATCH 2/5] usb: dwc2: Use regulator_set_enable_if_allowed
Simon Glass
- [PATCH 1/5] adc: Use regulator_set_enable_if_allowed
Simon Glass
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Simon Glass
- [PATCH v5 23/46] pci: Allow the video BIOS to work in SPL with QEMU
Simon Glass
- [PATCH] pci: Fix device_find_first_child() return value handling
Simon Glass
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Simon Glass
- [PATCH] fdt: off by one in ofnode_lookup_fdt()
Simon Glass
- [PATCH 10/18] riscv: qemu: Enable Bochs video support
Simon Glass
- [PATCH 15/18] riscv: qemu: Enable PRE_CONSOLE_BUFFER
Simon Glass
- [PATCH 17/18] riscv: qemu: Remove out-of-date "riscv, kernel-start" handling
Simon Glass
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH 2/5] iot2050: Use binman in signing script
Simon Glass
- [PATCH 1/1] fat: correct sign for deletion mark
Simon Glass
- Strange construct in binman description
Simon Glass
- [RFC PATCH 05/10] rpmsg: add sample client driver
Simon Glass
- [RFC PATCH 01/10] remoteproc: move resource table definition
Simon Glass
- [RFC PATCH 03/10] remoteproc: add remoteproc virtio transport driver
Simon Glass
- [RFC PATCH 04/10] drivers: add RPMsg framework
Simon Glass
- [RFC PATCH 06/10] cmd: add rpmsg framework commands
Simon Glass
- [RFC PATCH 07/10] remoteproc: add attach/detach commands
Simon Glass
- [RFC PATCH 10/10] configs: sandbox: enable rpmsg
Simon Glass
- [PATCH v2 01/12] scmi: refactor the code to hide a channel from devices
Simon Glass
- [PATCH v2 02/12] firmware: scmi: implement SCMI base protocol
Simon Glass
- [PATCH v2 03/12] firmware: scmi: move scmi_bind_protocols() backward
Simon Glass
- [PATCH v2 05/12] firmware: scmi: install base protocol to SCMI agent
Simon Glass
- [PATCH v2 10/12] cmd: add scmi command for SCMI firmware
Simon Glass
- [PATCH v2 11/12] doc: cmd: add documentation for scmi
Simon Glass
- [PATCH v2 12/12] test: dm: add scmi command test
Simon Glass
- [PATCH v2 1/4] rockchip: Add support to generate GZIP compressed U-boot binary
Simon Glass
- [PATCH v2 2/4] rockchip: Add support to generate LZMA compressed U-boot binary
Simon Glass
- [PATCH v2 3/4] spl: fit: support for booting a GZIP-compressed U-boot binary
Simon Glass
- [PATCH v2 4/4] spl: fit: support for booting a LZMA-compressed U-boot binary
Simon Glass
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v2 04/12] firmware: scmi: framework for installing additional protocols
Simon Glass
- [PATCH 1/1] efi_loader: simplify dp_fill()
Simon Glass
- [PATCH v2 09/12] test: dm: add SCMI base protocol test
Simon Glass
- [PATCH v2 05/12] firmware: scmi: install base protocol to SCMI agent
Simon Glass
- [PATCH 0/5] bootstd: Fix some reported problems
Simon Glass
- [PATCH 1/5] bootflow: Export setup_fs()
Simon Glass
- [PATCH 2/5] bootstd: Use a function to detect network in EFI bootmeth
Simon Glass
- [PATCH 3/5] bootstd: Avoid allocating memory for the EFI file
Simon Glass
- [PATCH 4/5] bootstd: Init the size before reading the devicetree
Simon Glass
- [PATCH 5/5] bootstd: Init the size before reading extlinux file
Simon Glass
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH] CI: Add automatic retry for test.py jobs
Simon Glass
- [RESEND PATCH v3 0/3] rpi: Convert to standard boot
Simon Glass
- [RESEND PATCH v3 1/3] arm: rpi: Switch to standard boot
Simon Glass
- [RESEND PATCH v3 2/3] rpi: Disable DISTRO_DEFAULTS
Simon Glass
- [RESEND PATCH v3 3/3] arm: rpi: Switch to a text environment
Simon Glass
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Simon Glass
- [PATCH 1/1] i2c: designware: build PCI support only for X86
Simon Glass
- [PATCHv4 0/5] net/lwip: add lwip library for the network stack
Simon Glass
- [PATCH v2] efi_loader: Fix memory corruption on 32bit systems
Simon Glass
- [PATCH] addrmap: Fix off by one in addrmap_set_entry()
Simon Glass
- [PATCH 2/6] arm_ffa: introduce armffa command
Simon Glass
- [PATCH] cramfs: clean up some error messages
Simon Glass
- [PATCH 3/5] boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
Simon Glass
- [PATCH] gpio: Use separate bitfield array to indicate GPIO is claimed
Simon Glass
- [PATCH 1/1] pci: correct function name in message
Simon Glass
- bootstd regression from distro_bootcmd for removable EFI boot and weird return codes for fs
Simon Glass
- [PATCH RFC 1/3] tools: binman: Enable getting file from specific directory
Simon Glass
- [PATCH RFC 2/3] WIP: getting signing nodes to work in FIT generator node
Simon Glass
- [PATCH 0/8] x86: Improve bootstd support
Simon Glass
- [PATCH 1/8] usb: Return -ENOENT when no devices are found
Simon Glass
- [PATCH 2/8] lib: Suppress E when writing error-string output
Simon Glass
- [PATCH 3/8] bootstd: Rename bootdev_setup_sibling_blk()
Simon Glass
- [PATCH 4/8] bootstd: Correct creating of bootdev sibling
Simon Glass
- [PATCH 5/8] bootstd: Add some more debugging in the bootdev uclass
Simon Glass
- [PATCH 6/8] x86: coreboot: Add IDE and SATA
Simon Glass
- [PATCH 7/8] x86: coreboot: Enable standard boot
Simon Glass
- [PATCH 8/8] x86: coreboot: Enable support for CBFS
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v2 1/1] doc: update doc/sphinx/requirements.txt
Simon Glass
- [PATCH] Remove unused parameters
Simon Glass
- [PATCH] Remove unused parameters
Simon Glass
- [PATCH v2] gpio: Use separate bitfield array to indicate GPIO is claimed
Simon Glass
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Simon Glass
- [PATCH 2/9] video: Tidy up Makefile rule for video
Simon Glass
- [PATCH v2 1/1] doc: U-Boot boot phases
Simon Glass
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [bug report] cros_ec: Add vstore support
Simon Glass
- [PATCHv4 1/5] net/lwip: add lwip-external submodule
Simon Glass
- [PATCH 1/1] doc: move README.falcon to HTML
Simon Glass
- [PATCH v2 0/9] x86: Improve bootstd support
Simon Glass
- [PATCH v2 1/9] fs: fat: Support reading from a larger block size
Simon Glass
- [PATCH v2 2/9] usb: Return -ENOENT when no devices are found
Simon Glass
- [PATCH v2 3/9] lib: Suppress E when writing error-string output
Simon Glass
- [PATCH v2 4/9] bootstd: Rename bootdev_setup_sibling_blk()
Simon Glass
- [PATCH v2 5/9] bootstd: Correct creating of bootdev sibling
Simon Glass
- [PATCH v2 6/9] bootstd: Add some more debugging in the bootdev uclass
Simon Glass
- [PATCH v2 7/9] x86: coreboot: Add IDE and SATA
Simon Glass
- [PATCH v2 8/9] x86: coreboot: Enable standard boot
Simon Glass
- [PATCH v2 9/9] x86: coreboot: Enable support for CBFS
Simon Glass
- [PATCH v2 0/9] x86: Fixes for distro booting
Simon Glass
- [PATCH v2 1/9] x86: spl: Drop unwanted debug()
Simon Glass
- [PATCH v2 2/9] video: Tidy up Makefile rule for video
Simon Glass
- [PATCH v2 3/9] x86: Run QEMU machine setup in SPL
Simon Glass
- [PATCH v2 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Simon Glass
- [PATCH v2 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v2 6/9] x86: Correct copying of BIOS mode information
Simon Glass
- [PATCH v2 7/9] video: Add a Kconfig option for SPL video handoff
Simon Glass
- [PATCH v2 8/9] x86: Enable useful options for qemu-86
Simon Glass
- [PATCH v2 9/9] x86: Update qemu documentation
Simon Glass
- [PATCH 00/16] bootstd: Improve ChromiumOS support
Simon Glass
- [PATCH 01/16] bootstd: cros: Correct reporting of I/O errors
Simon Glass
- [PATCH 02/16] bootstd: cros: Move partition reading into a function
Simon Glass
- [PATCH 03/16] bootstd: cros: Bring in some ChromiumOS structures
Simon Glass
- [PATCH 04/16] bootstd: cros: Support a kernel on either partition
Simon Glass
- [PATCH 05/16] bootstd: cros: Decode some kernel preamble fields
Simon Glass
- [PATCH 06/16] bootstd: cros: Simplify setup and cmdline expressions
Simon Glass
- [PATCH 07/16] bootstd: Move common zimage functions to bootm.h
Simon Glass
- [PATCH 08/16] bootstd: cros: Add docs for the kernel layout
Simon Glass
- [PATCH 09/16] bootstd: cros: Add private info for ChromiumOS
Simon Glass
- [PATCH 10/16] bootstd: Add private bootmeth data to the bootflow
Simon Glass
- [PATCH 11/16] bootstd: cros: Add a function to read info from partition
Simon Glass
- [PATCH 12/16] bootstd: cros: Add a function to read a kernel
Simon Glass
- [PATCH 13/16] bootstd: cros: Split up reading info and kernel
Simon Glass
- [PATCH 14/16] bootstd: Allow display of the x86 setup information
Simon Glass
- [PATCH 15/16] bootstd: Add a command to read all files for a bootflow
Simon Glass
- [PATCH 16/16] bootstd: cros: Add ARM support
Simon Glass
- [PATCH v2 2/9] usb: Return -ENOENT when no devices are found
Simon Glass
- Strange construct in binman description
Simon Glass
- [PATCH v2 5/9] bootstd: Correct creating of bootdev sibling
Simon Glass
- [PATCH v2 7/9] x86: coreboot: Add IDE and SATA
Simon Glass
- [PATCH 00/22] x86: Move some boards to text environment
Simon Glass
- [PATCH 01/22] doc: Explain how to avoid the distro-boot scripts
Simon Glass
- [PATCH 02/22] env: Use include/env for text-environment includes
Simon Glass
- [PATCH 03/22] env: Explain how to use #include files in text environment
Simon Glass
- [PATCH 04/22] x86: Drop CFG_SYS_STACK_SIZE
Simon Glass
- [PATCH 05/22] x86: i8254: Include required ibmpc.h header
Simon Glass
- [PATCH 06/22] x86: edison: Drop inclusion of ibmpc.h
Simon Glass
- [PATCH 07/22] x86: Drop inclusion of ibmpc.h
Simon Glass
- [PATCH 08/22] x86: Drop unused distro settings
Simon Glass
- [PATCH 09/22] x86: Add a common include for environment settings
Simon Glass
- [PATCH 10/22] x86: coreboot: Convert to text environment
Simon Glass
- [PATCH 11/22] x86: crownbay: Convert to text environment
Simon Glass
- [PATCH 12/22] x86: bayleybay: Convert to text environment
Simon Glass
- [PATCH 13/22] x86: galileo: Convert to text environment
Simon Glass
- [PATCH 14/22] x86: edison: Convert to text environment
Simon Glass
- [PATCH 15/22] x86: cherryhill: Convert to text environment
Simon Glass
- [PATCH 16/22] x86: cougarcanyon2: Convert to text environment
Simon Glass
- [PATCH 17/22] x86: minnowmax: Convert to text environment
Simon Glass
- [PATCH 18/22] x86: slimbootloader: Convert to text environment
Simon Glass
- [PATCH 19/22] x86: efi-x86_app: Convert to text environment
Simon Glass
- [PATCH 20/22] x86: efi-x86_payload: Convert to text environment
Simon Glass
- [PATCH 21/22] x86: qemu: Add required linux/sizes.h include
Simon Glass
- [PATCH 22/22] x86: qemu-x86: Convert to text environment
Simon Glass
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v3] x86: Change tesing logic of mtrr commit
Simon Glass
- [PATCH v2 5/9] bootstd: Correct creating of bootdev sibling
Simon Glass
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Simon Glass
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v2 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v3] x86: Change tesing logic of mtrr commit
Simon Glass
- [PATCH v2 2/6] x86: fsp: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Simon Glass
- [PATCH] test: fix a couple NULL vs IS_ERR() checks
Simon Glass
- [PATCH] expo: allocate correct ammount of memory
Simon Glass
- [PATCH] cmd: improve string matching for hex
Simon Glass
- [PATCH] dm: Correct DM_FLAG_ comment
Simon Glass
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Simon Glass
- [PATCH] cmd: pxe: Update the command help
Simon Glass
- [PATCH 1/1] tools/fdt_add_pubkey: error handling in add_pubkey
Simon Glass
- [PATCH 00/22] x86: Move some boards to text environment
Simon Glass
- [PATCH v2 3/6] video: broadwell: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v2 4/6] video: ivybridge: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v2 5/6] video: vesa: Use mtrr_set_next_var() for graphics memory
Simon Glass
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Simon Glass
- [PATCH v3 1/2] dm: core: ofnode: Add ofnode_read_bootscript_address()
Simon Glass
- [PATCH 2/2] arch: m68k: Implement relocation
Simon Glass
- [PATCH 1/1] boot: fix bootdev_list()
Simon Glass
- [PATCH v2 1/1] doc: describe QEMU virtio block device
Simon Glass
- [PATCH 3/8] bootstd: Rename bootdev_setup_sibling_blk()
Simon Glass
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Simon Glass
- [PATCH] ram: mediatek: mt7629: include <linux/sizes.h>
Daniel Golle
- [PATCH 1/2] mxs: Fix VDDx brownout interrupt disable/enable
Cody Green
- [PATCH 2/2] mxs: Don't enable 4P2 reg if MXS is powered only from DCDC_BATT
Cody Green
- [PATCH 1/2] mxs: Fix VDDx brownout interrupt disable/enable
Cody Green
- [PATCH v2 1/2] mxs: Fix VDDx brownout interrupt disable/enable
Cody Green
- [PATCH 2/2] mxs: Don't enable 4P2 reg if MXS is powered only from DCDC_BATT
Cody Green
- [PATCH 00/20] Enable DM_SERIAL for NXP PPC T-series boards
Camelia Groza
- [PATCH 01/20] board: freescale: t2080rdb: enumerate PCI devices
Camelia Groza
- [PATCH 02/20] board: freescale: t2080rdb: implement get_serial_clock
Camelia Groza
- [PATCH 03/20] powerpc: dts: t2080rdb: add serial nodes
Camelia Groza
- [PATCH 04/20] powerpc: dts: t2080rdb: tag serial nodes with bootph-all
Camelia Groza
- [PATCH 05/20] configs: T2080RDB: enable DM_SERIAL
Camelia Groza
- [PATCH 06/20] board: freescale: t4240rdb: enumerate PCI devices
Camelia Groza
- [PATCH 07/20] board: freescale: t4240rdb: implement get_serial_clock
Camelia Groza
- [PATCH 08/20] powerpc: dts: t4240rdb: add serial nodes
Camelia Groza
- [PATCH 09/20] powerpc: dts: t4240rdb: tag serial nodes with bootph-all
Camelia Groza
- [PATCH 10/20] configs: T4240RDB: enable DM_SERIAL
Camelia Groza
- [PATCH 11/20] board: freescale: t104xrdb: enumerate PCI devices
Camelia Groza
- [PATCH 12/20] board: freescale: t104xrdb: implement get_serial_clock
Camelia Groza
- [PATCH 13/20] powerpc: dts: t1042d4rdb: add serial nodes
Camelia Groza
- [PATCH 14/20] powerpc: dts: t1042d4rdb: tag serial nodes with bootph-all
Camelia Groza
- [PATCH 15/20] configs: T1042D4RDB: enable DM_SERIAL
Camelia Groza
- [PATCH 16/20] board: freescale: t102xrdb: enumerate PCI devices
Camelia Groza
- [PATCH 17/20] board: freescale: t102xrdb: implement get_serial_clock
Camelia Groza
- [PATCH 18/20] powerpc: dts: t1024rdb: add serial nodes
Camelia Groza
- [PATCH 19/20] powerpc: dts: t1024rdb: tag serial nodes with bootph-all
Camelia Groza
- [PATCH 20/20] configs: T1024RDB: enable DM_SERIAL
Camelia Groza
- [RFC PATCH 2/4] arm: mach-k3: am62: Add timer0 id to the dev list
Ravi Gunasekaran
- [PATCH] usb: cdns3: gadget: Configure speed in udc_start
Ravi Gunasekaran
- [PATCH] usb: cdns3: gadget: Configure speed in udc_start
Ravi Gunasekaran
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Ravi Gunasekaran
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Ravi Gunasekaran
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Ravi Gunasekaran
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Ravi Gunasekaran
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Ravi Gunasekaran
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Anatolij Gustschin
- Please pull u-boot-video
Anatolij Gustschin
- [PATCH] video: backlight: pwm: avoid integer overflow in duty cycle calculation
Anatolij Gustschin
- [PATCH] video: hx8394: Add panel driver for hannstar,hsd060bhw4
Anatolij Gustschin
- [PATCH] video: console: Fix default font selection
Anatolij Gustschin
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Anatolij Gustschin
- [PATCH] video: rockchip: Add support for RK3399 to dw-mipi-dsi bridge
Anatolij Gustschin
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Anatolij Gustschin
- Double free on xhci_register failure.
Richard Habeeb
- [PATCH] xhci_register: Fix double free on failure
Richard Habeeb
- [PATCH] xhci_register: Fix double free on failure
Richard Habeeb
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v3] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH] arm: dts: imx8m: add OPTEE_LOAD_ADDRESS config and tee.bin
Tim Harvey
- [PATCH v5] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v5] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v6 1/2] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v6 2/2] phy: phy-imx8mq-usb: clean up clock code
Tim Harvey
- [PATCH] usb: ehci-mx6: remove unnecessary regulator enable from probe
Tim Harvey
- [PATCH v7 1/2] phy: phy-imx8mq-usb: add vbus regulator support
Tim Harvey
- [PATCH v7 2/2] phy: phy-imx8mq-usb: clean up clock code
Tim Harvey
- [PATCH 2/3] arm: dts: imx8mn: Sync with Linux 6.3
Tim Harvey
- [PATCH 1/3] arm: dts: imx8mm: Sync with Linux 6.3
Tim Harvey
- Strange construct in binman description
Tim Harvey
- [PATCH 1/2] schemas: Add firmware node schema
Rob Herring
- [PATCH 0/2] Add initial support for PINE64 PineTab2
David Hewitt
- [PATCH 1/2] rockchip: Add initial support for the PineTab2 from PINE64
David Hewitt
- [PATCH 2/2] mmc: Add quirk to disable PWREN for dw_mmc
David Hewitt
- [PATCH v2 2/2] mmc: Add quirk to disable PWREN for dw_mmc
David Hewitt
- [PATCH v2 2/2] mmc: Add quirk to disable PWREN for dw_mmc
David Hewitt
- [PATCH v3] board: rockchip: add Radxa ROCK5A Rk3588 board
Eugen Hristev
- [PATCH] git-mailrc: add alias for Eugen Hristev
Eugen Hristev
- [PATCH v4 1/2] ARM: dts: rockchip: rk3588: Move bootph-all props to common file
Eugen Hristev
- [PATCH v4 2/2] board: rockchip: add Radxa ROCK5A Rk3588 board
Eugen Hristev
- [PATCH v4 1/2] ARM: dts: rockchip: rk3588: Move bootph-all props to common file
Eugen Hristev
- [PATCH v4 2/2] board: rockchip: add Radxa ROCK5A Rk3588 board
Eugen Hristev
- [PATCH v2] fpga: add inline stub for fpga_load
Eugen Hristev
- [PATCH 2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
Eugen Hristev
- [PATCH 2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
Eugen Hristev
- [PATCH] MAINTAINERS: correct at91 tree link
Eugen Hristev
- [PATCH v3] fpga: add inline stub for fpga_load
Eugen Hristev
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Eugen Hristev
- [PATCH v1 1/4] power: regulator: expand basic reference counter onto all uclass
Eugen Hristev
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Eugen Hristev
- [PATCH 2/2] configs: rock5b-rk3588: add rtl8169 driver
Eugen Hristev
- [u-boot][PATCH] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Eugen Hristev
- [u-boot][PATCH] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Eugen Hristev
- [PATCH] configs: sama5d2: enable CONFIG_LTO
Eugen Hristev
- [PATCH] configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO
Eugen Hristev
- [PATCH] configs: sama5d2: enable CONFIG_LTO
Eugen Hristev
- [PATCH] configs: sama5d2: enable CONFIG_LTO
Eugen Hristev
- [PATCH v2] atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE.
Eugen Hristev
- [PULL] u-boot-at91-fixes-2023.10-a
Eugen Hristev
- [PATCH v5 1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7
Eugen Hristev
- [PATCH v5 2/3] usb: ohci-at91: Enable OHCI functionality and register into DM
Eugen Hristev
- [PATCH v5 3/3] usb: ohci-at91: Add USB PHY functionality
Eugen Hristev
- [PATCH] ARM: mach-rockchip: rk3588: fix stray CONFIG line in Kconfig
Eugen Hristev
- [PATCH v4 0/6] add loongson mips ls1c300 initial support
Du Huanpeng
- [PATCH v4 1/6] mips: initial build infrastructure for loongson SoCs
Du Huanpeng
- [PATCH v4 2/6] mips: ls1c300: add base support
Du Huanpeng
- [PATCH v4 3/6] mips: add a ls1c300 based board
Du Huanpeng
- [PATCH v4 4/6] mips: ls1c300: add clock driver
Du Huanpeng
- [PATCH v4 5/6] mips: ls1c300: add watchdog support
Du Huanpeng
- [PATCH v4 6/6] mips: ls1c300: add reset support based on watchdog driver
Du Huanpeng
- [PATCH v5 0/6] add loongson mips ls1c300 initial support
Du Huanpeng
- [PATCH v5 1/6] mips: initial build infrastructure for loongson SoCs
Du Huanpeng
- [PATCH v5 2/6] mips: ls1c300: add base support
Du Huanpeng
- [PATCH v5 3/6] mips: add a ls1c300 based board
Du Huanpeng
- [PATCH v5 4/6] mips: ls1c300: add clock driver
Du Huanpeng
- [PATCH v5 5/6] mips: ls1c300: add watchdog support
Du Huanpeng
- [PATCH v5 6/6] mips: ls1c300: add reset support based on watchdog driver
Du Huanpeng
- [PATCH v5 3/6] mips: add a ls1c300 based board
Du Huanpeng
- [PATCH v5 3/6] mips: add a ls1c300 based board
Du Huanpeng
- [PATCH] MIPS: Loongson32: DeviceTree for Loongson-ls1c300
Du Huanpeng
- [PATCH] net: ftgmac100: Add reset control
Dylan Hung
- [PATCH V5 0/9] Update SPL splashscreen framework for AM62x
Nikhil M Jain
- [EXTERNAL] Re: [PATCH] common: Kconfig: Fix CMD_BMP/BMP dependency
Nikhil M Jain
- [PATCH 03/18] board: ti: am64x: am64x.env: set fdtfile env variable
Nikhil M Jain
- [PATCH 13/18] configs: k3: make consistent bootcmd across all k3 socs
Nikhil M Jain
- [PATCH 13/18] configs: k3: make consistent bootcmd across all k3 socs
Nikhil M Jain
- [PATCH 07/18] environment: ti: Prefix ARM64 DTB names with directory
Nikhil M Jain
- [PATCH 08/18] environment: ti: Make get_fdt_mmc common
Nikhil M Jain
- [PATCH V6 00/10] Update SPL splashscreen framework for AM62x
Nikhil M Jain
- [PATCH V6 01/10] common: spl: spl: Update stack pointer address
Nikhil M Jain
- [PATCH V6 02/10] arch: arm: mach-k3: common: Return a pointer after setting page table
Nikhil M Jain
- [PATCH V6 03/10] board: ti: am62x: evm: Update function calls for splash screen
Nikhil M Jain
- [PATCH V6 04/10] include: video: Reserve video using blob
Nikhil M Jain
- [PATCH V6 05/10] common: board_f: Pass frame buffer info from SPL to u-boot
Nikhil M Jain
- [PATCH V6 06/10] drivers: video: Kconfig: Add config remove video
Nikhil M Jain
- [PATCH V6 07/10] common: spl: spl: Remove video driver
Nikhil M Jain
- [PATCH V6 08/10] configs: am62x_evm_a53: Add bloblist address
Nikhil M Jain
- [PATCH V6 09/10] doc: board: ti: am62x_sk: Add A53 SPL DDR layout
Nikhil M Jain
- [PATCH V6 10/10] common: Kconfig: Fix CMD_BMP/BMP dependency
Nikhil M Jain
- [PATCH V2 0/2] Fix warnings occurred during compilation
Nikhil M Jain
- [EXTERNAL] Re: [PATCH V2 0/2] Fix warnings occurred during compilation
Nikhil M Jain
- [PATCH V2 0/2] Fix warnings occurred during compilation
Nikhil M Jain
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Nikhil M Jain
- [EXTERNAL] [PATCH 2/9] video: Tidy up Makefile rule for video
Nikhil M Jain
- [PATCH 1/5] configs: am62x: add SPL_MAX_SIZE back
Nikhil M Jain
- [PATCH 3/5] env: ti: mmc.env: Move mmc related args to common place
Nikhil M Jain
- [PATCH 4/5] env: ti: mmc.env: Fix overlays directory path
Nikhil M Jain
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Nikhil M Jain
- [PATCH 0/2] Update remove method for DSS driver
Nikhil M Jain
- [PATCH 1/2] drivers: video: tidss: tidss_drv: Change remove method
Nikhil M Jain
- [PATCH 2/2] drivers: video: tidss: tidss_drv: Use kconfig VIDEO_REMOVE to remove video
Nikhil M Jain
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Nikhil M Jain
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Nikhil M Jain
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Huang Jianan
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Ondřej Jirman
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Ondřej Jirman
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Ondřej Jirman
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Ondřej Jirman
- [PATCH v4] dt-bindings: riscv: deprecate riscv,isa
Andrew Jones
- EFI Secure boot default keys
Neil Jones
- EFI Secure boot default keys
Neil Jones
- [RFC PATCH 0/3] Minimal platform configuration
Jason Kacines
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Jason Kacines
- [RFC PATCH 2/3] configs: Add am62x wakeup defconfigs
Jason Kacines
- [RFC PATCH 3/3] board: ti: am62x: Add am62x_evm defconfig fragments
Jason Kacines
- [PATCH] docs: boards: ti: add openocd spl debugging docs
Jason Kacines
- [PATCH] board: ti: am62x: Add variable device tree in env
Jason Kacines
- [PATCH] board: ti: am62x: Add variable device tree in env
Jason Kacines
- [PATCH 0/1] sunxi: H616: add LPDDR4 support
Mikhail Kalashnikov
- [PATCH 1/1] sunxi: H616: add LPDDR4 DRAM support
Mikhail Kalashnikov
- Aw: Re: Re: distro_boot vs. env-based bootmenu
Jonas Karlman
- [PATCH] rockchip: rk3568: Fix alloc space exhausted in SPL
Jonas Karlman
- [RFC] rockchip: spl: Enable caches to speed up checksum validation
Jonas Karlman
- [RFC] rockchip: spl: Enable caches to speed up checksum validation
Jonas Karlman
- [PATCH 0/2] power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
Jonas Karlman
- [PATCH 1/2] DO NOT MERGE: mmc: dw_mmc: Keep vqmmc-supply enable count in balance
Jonas Karlman
- [PATCH 2/2] power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
Jonas Karlman
- [PATCH 0/4] rockchip: rk3568: Device Tree updates
Jonas Karlman
- [PATCH 1/4] rockchip: rk356x: Sync dtsi from linux v6.4
Jonas Karlman
- [PATCH 2/4] rockchip: rk3566-radxa-cm3-io: Sync dts from linux v6.4
Jonas Karlman
- [PATCH 3/4] rockchip: rk356x-u-boot: Add bootph-all to common pinctrl nodes
Jonas Karlman
- [PATCH 4/4] rockchip: rk356x-u-boot: Use relaxed u-boot,spl-boot-order
Jonas Karlman
- [PATCH] phy: phy-uclass: Add a missing error handling path
Jonas Karlman
- [PATCH 0/2] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH 1/2] ata: dwc_ahci: Fix support for other platforms
Jonas Karlman
- [PATCH 2/2] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v3] board: rockchip: add Radxa ROCK5A Rk3588 board
Jonas Karlman
- [PATCH] arm64: dts: rockchip: rk3568: Add ODROID-M1 board support
Jonas Karlman
- [PATCH] phy: phy-uclass: Add a missing error handling path
Jonas Karlman
- [PATCH 2/2] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Jonas Karlman
- [PATCH v2 2/2] mmc: Add quirk to disable PWREN for dw_mmc
Jonas Karlman
- [PATCH 1/2] rockchip: Add initial support for the PineTab2 from PINE64
Jonas Karlman
- [PATCH v3] phy: phy-imx8mq-usb: add vbus regulator support
Jonas Karlman
- [PATCH v3 09/19] binman: Convert mkimage to Entry_section
Jonas Karlman
- [PATCH v4 09/20] binman: Convert mkimage to Entry_section
Jonas Karlman
- [PATCH] disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS
Jonas Karlman
- [PATCH] pci: rockchip: Release resources on failing probe
Jonas Karlman
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Jonas Karlman
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Jonas Karlman
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Jonas Karlman
- [PATCH 0/2] rockchip: rk35xx: Fix SPI Flash alias
Jonas Karlman
- [PATCH 1/2] rockchip: rk3568-rock-3a: Fix SPI Flash alias
Jonas Karlman
- [PATCH 2/2] rockchip: rk3588-rock-5b: Fix SPI Flash alias
Jonas Karlman
- [PATCH 2/2] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v2 0/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v2 1/3] ata: dwc_ahci: Fix support for other platforms
Jonas Karlman
- [PATCH v2 2/3] cmd: ini: Fix build warning
Jonas Karlman
- [PATCH v2 3/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v2] rockchip: rk3568: Add support for Lubancat2 board from EmbedFire
Jonas Karlman
- [PATCH v2 5/9] pci: pcie_dw_rockchip: Hide BARs of the root complex
Jonas Karlman
- [PATCH v2 3/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v2 8/9] rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Jonas Karlman
- [PATCH v2 0/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v2 1/5] Revert "arm: dts: rockchip: radxa-cm3-io, rock-3a: enable regulators for usb"
Jonas Karlman
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v2 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v2 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v2 5/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Jonas Karlman
- [PATCH v5 1/3] binman: Add support for externally encrypted blobs
Jonas Karlman
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v2 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Jonas Karlman
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Jonas Karlman
- [PATCH v3 0/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v3 1/5] Revert "arm: dts: rockchip: radxa-cm3-io, rock-3a: enable regulators for usb"
Jonas Karlman
- [PATCH v3 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v3 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v3 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v3 5/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jonas Karlman
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Jonas Karlman
- [PATCH v3 0/9] rockchip: Fix PCIe and NVMe support on RK3568
Jonas Karlman
- [PATCH v3 1/9] core: read: add dev_read_addr_size_index_ptr function
Jonas Karlman
- [PATCH v3 2/9] pci: pcie_dw_rockchip: Get config region from reg prop
Jonas Karlman
- [PATCH v3 3/9] pci: pcie_dw_rockchip: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH v3 4/9] pci: pcie_dw_rockchip: Speed up link probe
Jonas Karlman
- [PATCH v3 5/9] pci: pcie_dw_rockchip: Hide BARs of the root complex
Jonas Karlman
- [PATCH v3 6/9] regulator: fixed: Add support for gpios prop
Jonas Karlman
- [PATCH v3 7/9] rockchip: clk: clk_rk3568: Add CLK_PCIEPHY2_REF support
Jonas Karlman
- [PATCH v3 8/9] rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Jonas Karlman
- [PATCH v3 9/9] rockchip: rk356x: Update PCIe config, IO and memory regions
Jonas Karlman
- [PATCH] menu: Ignore prompt variable if timeout is != 0
Jonas Karlman
- [PATCH v2 0/7] binman: Show missing blob message when building U-Boot
Jonas Karlman
- [PATCH v2 1/7] binman: Update tee-os missing blob help text
Jonas Karlman
- [PATCH v2 2/7] binman: Update missing optional external blob warning text
Jonas Karlman
- [PATCH v2 3/7] binman: Report missing external blobs using error level
Jonas Karlman
- [PATCH v2 4/7] binman: Override CheckOptional in fit entry
Jonas Karlman
- [PATCH v2 5/7] binman: Fix blank line usage for invalid images warning text
Jonas Karlman
- [PATCH v2 6/7] binman: Show filename in missing blob help message
Jonas Karlman
- [PATCH v2 7/7] Makefile: Show binman missing blob message
Jonas Karlman
- [PATCH] menu: Ignore prompt variable if timeout is != 0
Jonas Karlman
- [PATCH 0/5] Keep fixed/gpio regulator enable count in balance
Jonas Karlman
- [PATCH 1/5] adc: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH 2/5] usb: dwc2: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH 3/5] usb: ehci-generic: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH 4/5] mmc: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH 5/5] mmc: dw_mmc: Keep vqmmc-supply enable count in balance
Jonas Karlman
- [PATCH v3 5/9] pci: pcie_dw_rockchip: Hide BARs of the root complex
Jonas Karlman
- [PATCH v4 0/9] rockchip: Fix PCIe and NVMe support on RK3568
Jonas Karlman
- [PATCH v4 1/9] core: read: add dev_read_addr_size_index_ptr function
Jonas Karlman
- [PATCH v4 2/9] pci: pcie_dw_rockchip: Get config region from reg prop
Jonas Karlman
- [PATCH v4 3/9] pci: pcie_dw_rockchip: Use regulator_set_enable_if_allowed
Jonas Karlman
- [PATCH v4 4/9] pci: pcie_dw_rockchip: Speed up link probe
Jonas Karlman
- [PATCH v4 5/9] pci: pcie_dw_rockchip: Disable unused BARs of the root complex
Jonas Karlman
- [PATCH v4 6/9] regulator: fixed: Add support for gpios prop
Jonas Karlman
- [PATCH v4 7/9] rockchip: clk: clk_rk3568: Add CLK_PCIEPHY2_REF support
Jonas Karlman
- [PATCH v4 8/9] rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Jonas Karlman
- [PATCH v4 9/9] rockchip: rk356x: Update PCIe config, IO and memory regions
Jonas Karlman
- [PATCH v3 0/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH v3 1/3] ata: dwc_ahci: Fix support for other platforms
Jonas Karlman
- [PATCH v3 2/3] cmd: ini: Fix build warning
Jonas Karlman
- [PATCH v3 3/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH 0/5] board: rockchip: Add Pine64 Quartz64 and SOQuartz boards
Jonas Karlman
- [PATCH 1/5] board: rockchip: Add Pine64 Quartz64-A Board
Jonas Karlman
- [PATCH 2/5] board: rockchip: Add Pine64 Quartz64-B Board
Jonas Karlman
- [PATCH 3/5] board: rockchip: Add Pine64 SOQuartz on Model A
Jonas Karlman
- [PATCH 4/5] board: rockchip: Add Pine64 SOQuartz on Blade
Jonas Karlman
- [PATCH 5/5] board: rockchip: Add Pine64 SOQuartz on CM4-IO
Jonas Karlman
- [PATCH 1/5] board: rockchip: Add Pine64 Quartz64-A Board
Jonas Karlman
- [PATCH 2/5] board: rockchip: Add Pine64 Quartz64-B Board
Jonas Karlman
- [PATCH 3/5] board: rockchip: Add Pine64 SOQuartz on Model A
Jonas Karlman
- [PATCH 4/5] board: rockchip: Add Pine64 SOQuartz on Blade
Jonas Karlman
- [PATCH 5/5] board: rockchip: Add Pine64 SOQuartz on CM4-IO
Jonas Karlman
- [PATCH] board: rockchip: Add Radxa E25 Carrier Board
Jonas Karlman
- [PATCH v2] board: rockchip: Add Radxa E25 Carrier Board
Jonas Karlman
- [PATCH v2] board: rockchip: Add Radxa E25 Carrier Board
Jonas Karlman
- [PATCH v4 1/9] core: read: add dev_read_addr_size_index_ptr function
Jonas Karlman
- [PATCH v3 0/3] board: rockchip: Add Hardkernel ODROID-M1
Jonas Karlman
- [PATCH] mtd: spi-nor: Add support for Silicon Kaiser sk25lp128
Jonas Karlman
- [PATCH v2 3/4] spl: fit: support for booting a GZIP-compressed U-boot binary
Jonas Karlman
- [PATCH v2 4/4] spl: fit: support for booting a LZMA-compressed U-boot binary
Jonas Karlman
- [PATCH v2 0/4] support for booting the compressed U-boot binary on Rockchip based ARM64 SOC's
Jonas Karlman
- [PATCH v2 0/5] rockchip: Fix SPI flash SPL and payload overlap
Jonas Karlman
- [PATCH v2 1/5] rockchip: rk3399-rockpro64: Fix SPL max size and SPI flash payload offset
Jonas Karlman
- [PATCH v2 2/5] rockchip: rk3399-pinebook-pro: Fix SPL max size and SPI flash payload offset
Jonas Karlman
- [PATCH v2 3/5] rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload offset
Jonas Karlman
- [PATCH v2 4/5] rockchip: rk3399-roc-pc: Fix SPL max size and SPI flash payload offset
Jonas Karlman
- [PATCH v2 5/5] doc: rockchip: Update SPI flashing instruction
Jonas Karlman
- [PATCH v2 0/4] rockchip: rk3568: Device Tree updates
Jonas Karlman
- [PATCH v2 1/4] rockchip: rk356x: Sync dtsi from linux v6.4
Jonas Karlman
- [PATCH v2 2/4] rockchip: rk3566-radxa-cm3-io: Sync dts from linux v6.4
Jonas Karlman
- [PATCH v2 3/4] rockchip: rk356x-u-boot: Add bootph-all to common pinctrl nodes
Jonas Karlman
- [PATCH v2 4/4] rockchip: rk356x-u-boot: Use relaxed u-boot,spl-boot-order
Jonas Karlman
- [PATCH v2 0/2] rockchip: rk35xx: Fix SPI Flash alias
Jonas Karlman
- [PATCH v2 1/2] rockchip: rk3568-rock-3a: Fix SPI Flash alias
Jonas Karlman
- [PATCH v2 2/2] rockchip: rk3588-rock-5b: Fix SPI Flash alias
Jonas Karlman
- [PATCH v4 0/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v4 1/5] Revert "arm: dts: rockchip: radxa-cm3-io, rock-3a: enable regulators for usb"
Jonas Karlman
- [PATCH v4 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v4 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v4 5/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH 0/5] board: rockchip: Add Pine64 Quartz64 and SOQuartz boards
Jonas Karlman
- [PATCH v2 0/5] board: rockchip: Add Pine64 Quartz64 and SOQuartz boards
Jonas Karlman
- [PATCH v2 1/5] board: rockchip: Add Pine64 Quartz64-A Board
Jonas Karlman
- [PATCH v2 2/5] board: rockchip: Add Pine64 Quartz64-B Board
Jonas Karlman
- [PATCH v2 3/5] board: rockchip: Add Pine64 SOQuartz on Model A
Jonas Karlman
- [PATCH v2 4/5] board: rockchip: Add Pine64 SOQuartz on Blade
Jonas Karlman
- [PATCH v2 5/5] board: rockchip: Add Pine64 SOQuartz on CM4-IO
Jonas Karlman
- [PATCH v3] board: rockchip: Add Radxa E25 Carrier Board
Jonas Karlman
- [PATCH] rockchip: rk3568-rock-3a: Fix pcie2x1 and pcie3x2 pinctrl override
Jonas Karlman
- [PATCH v3] rockchip: rk3568: Add EmbedFire Lubancat 2 support
Jonas Karlman
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v5 0/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v5 1/5] Revert "arm: dts: rockchip: radxa-cm3-io, rock-3a: enable regulators for usb"
Jonas Karlman
- [PATCH v5 2/5] usb: dwc3-generic: Return early when there is no child node
Jonas Karlman
- [PATCH v5 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Jonas Karlman
- [PATCH v5 4/5] usb: dwc3-generic: Add rk3568 support
Jonas Karlman
- [PATCH v5 5/5] rockchip: rk3568: Use dwc3-generic driver
Jonas Karlman
- [PATCH v2] rockchip: rk3568-rock-3a: Fix pcie2x1 and pcie3x2 pinctrl override
Jonas Karlman
- [PATCH 1/2] DO NOT MERGE: mmc: dw_mmc: Keep vqmmc-supply enable count in balance
Jonas Karlman
- [PATCH] pci: apple: Enable CONFIG_SYS_PCI_64BIT
Mark Kettenis
- [PATCH] bootstd: Make efi_mgr bootmeth work for non-sandbox setups
Mark Kettenis
- [PATCH] phy: Add support for the Apple Type-C PHY
Mark Kettenis
- [PATCH 0/3] Load ASMedia XHCI controller firmware
Mark Kettenis
- [PATCH 1/3] apple: Set up file system firmware loader
Mark Kettenis
- [PATCH 2/3] iopoll: Add readb_poll_sleep_timeout
Mark Kettenis
- [PATCH 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware
Mark Kettenis
- [PATCH 2/3] iopoll: Add readb_poll_sleep_timeout
Mark Kettenis
- [PATCH 1/3] apple: Set up file system firmware loader
Mark Kettenis
- [PATCH 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware
Mark Kettenis
- [PATCH] bootstd: Make efi_mgr bootmeth work for non-sandbox setups
Mark Kettenis
- [PATCH] Makefile: Use sort shortopts
Mark Kettenis
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Mark Kettenis
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Mark Kettenis
- [PATCH v13 04/10] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v13 01/10] arm64: smccc: add support for SMCCCv1.2 x0-x17 registers
Abdellatif El Khlifi
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v13 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v14 00/11] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v14 01/11] arm64: smccc: add support for SMCCCv1.2 x0-x17 registers
Abdellatif El Khlifi
- [PATCH v14 02/11] lib: uuid: introduce uuid_str_to_le_bin function
Abdellatif El Khlifi
- [PATCH v14 03/11] lib: uuid: introduce testcase for uuid_str_to_le_bin
Abdellatif El Khlifi
- [PATCH v14 04/11] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Abdellatif El Khlifi
- [PATCH v14 06/11] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v14 07/11] arm_ffa: introduce sandbox FF-A support
Abdellatif El Khlifi
- [PATCH v14 08/11] arm_ffa: introduce sandbox test cases for UCLASS_FFA
Abdellatif El Khlifi
- [PATCH v14 09/11] arm_ffa: introduce armffa command Sandbox test
Abdellatif El Khlifi
- [PATCH v14 10/11] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Abdellatif El Khlifi
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Abdellatif El Khlifi
- [PATCH v14 05/11] log: select physical address formatting in a generic way
Abdellatif El Khlifi
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Abdellatif El Khlifi
- [PATCH v15 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v15 01/10] arm64: smccc: add support for SMCCCv1.2 x0-x17 registers
Abdellatif El Khlifi
- [PATCH v15 02/10] lib: uuid: introduce uuid_str_to_le_bin function
Abdellatif El Khlifi
- [PATCH v15 03/10] lib: uuid: introduce testcase for uuid_str_to_le_bin
Abdellatif El Khlifi
- [PATCH v15 04/10] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v15 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v15 06/10] arm_ffa: introduce sandbox FF-A support
Abdellatif El Khlifi
- [PATCH v15 07/10] arm_ffa: introduce sandbox test cases for UCLASS_FFA
Abdellatif El Khlifi
- [PATCH v15 08/10] arm_ffa: introduce armffa command Sandbox test
Abdellatif El Khlifi
- [PATCH v15 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v15 10/10] arm_ffa: efi: corstone1000: enable MM communication
Abdellatif El Khlifi
- [PATCH v15 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v15 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v15 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v16 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v16 01/10] arm64: smccc: add support for SMCCCv1.2 x0-x17 registers
Abdellatif El Khlifi
- [PATCH v16 02/10] lib: uuid: introduce uuid_str_to_le_bin function
Abdellatif El Khlifi
- [PATCH v16 03/10] lib: uuid: introduce testcase for uuid_str_to_le_bin
Abdellatif El Khlifi
- [PATCH v16 04/10] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v16 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v16 06/10] arm_ffa: introduce sandbox FF-A support
Abdellatif El Khlifi
- [PATCH v16 07/10] arm_ffa: introduce sandbox test cases for UCLASS_FFA
Abdellatif El Khlifi
- [PATCH v16 08/10] arm_ffa: introduce armffa command Sandbox test
Abdellatif El Khlifi
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v16 10/10] arm_ffa: efi: corstone1000: enable MM communication
Abdellatif El Khlifi
- [PATCH 2/6] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v17 00/10] introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v17 01/10] arm64: smccc: add support for SMCCCv1.2 x0-x17 registers
Abdellatif El Khlifi
- [PATCH v17 02/10] lib: uuid: introduce uuid_str_to_le_bin function
Abdellatif El Khlifi
- [PATCH v17 03/10] lib: uuid: introduce testcase for uuid_str_to_le_bin
Abdellatif El Khlifi
- [PATCH v17 04/10] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
- [PATCH v17 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v17 06/10] arm_ffa: introduce sandbox FF-A support
Abdellatif El Khlifi
- [PATCH v17 07/10] arm_ffa: introduce sandbox test cases for UCLASS_FFA
Abdellatif El Khlifi
- [PATCH v17 08/10] arm_ffa: introduce armffa command Sandbox test
Abdellatif El Khlifi
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH v17 10/10] arm_ffa: efi: corstone1000: enable MM communication
Abdellatif El Khlifi
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH 2/6] arm_ffa: introduce armffa command
Abdellatif El Khlifi
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Abdellatif El Khlifi
- [PATCH] net: axi_emac: Change return value to -EAGAIN if RX is not ready
Maksim Kiselev
- [PATCH 16/20] sunxi: add Allwinner R528/T113 SoC support
Maxim Kiselev
- [PATCH 12/12] binman: Support simple templates
Jan Kiszka
- [PATCH 07/12] binman: Provide a way to specific the fdt-list directly
Jan Kiszka
- [PATCH 12/12] binman: Support simple templates
Jan Kiszka
- [PATCH v5 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Jan Kiszka
- [PATCH v5 20/23] doc: board: ti: Update documentation for binman flow
Jan Kiszka
- [PATCH 12/12] binman: Support simple templates
Jan Kiszka
- [PATCH] binman: Support templating with multiple images
Jan Kiszka
- [PATCH 12/12] binman: Support simple templates
Jan Kiszka
- [PATCH 12/12] binman: Support simple templates
Jan Kiszka
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Jan Kiszka
- [PATCH v5 11/23] am64x: dts: binman: Package tiboot3.bin, tispl.bin u-boot.img
Jan Kiszka
- [PATCH v3 00/19] binman: Simple templating feature and mkimage conversion
Jan Kiszka
- [PATCH v5 01/23] binman: ti-board-config: Add support for TI board config binaries
Jan Kiszka
- [PATCH v5 04/23] j721e: schema: yaml: Add general schema and J721E board config files
Jan Kiszka
- [PATCH v5 10/23] am64x: yaml: Add board configs for AM64x
Jan Kiszka
- [PATCH v5 12/23] j721s2: yaml: Add board configs for J721S2
Jan Kiszka
- [PATCH v5 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Jan Kiszka
- [PATCH v4 00/20] binman: Simple templating feature and mkimage conversion
Jan Kiszka
- [PATCH v6 18/23] arm: k3-am65x-iot2050: Use binman for tispl.bin for iot2050
Jan Kiszka
- [PATCH 2/5] MAINTAINERS: Add some missing defconfig files to existing entries
Jan Kiszka
- [PATCH 00/18] K3 HS Support along with fixes
Jan Kiszka
- [PATCH 00/18] K3 HS Support along with fixes
Jan Kiszka
- [PATCH 0/5] iot2050: 2023.10-rc1 fixes and cleanups
Jan Kiszka
- [PATCH 1/5] boards: siemens: iot2050: Fix boot configuration
Jan Kiszka
- [PATCH 2/5] iot2050: Use binman in signing script
Jan Kiszka
- [PATCH 3/5] boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
Jan Kiszka
- [PATCH 4/5] doc: board: siemens: iot2050: Update build env vars
Jan Kiszka
- [PATCH 5/5] configs: iot2050: Enabled keyed autoboot
Jan Kiszka
- [PATCH 1/1] i2c: designware: build PCI support only for X86
Maxim Kochetkov
- [PATCH] rockchip: px30: Define variables for compressed image support
Paul Kocialkowski
- [PATCH] efi_driver: fix duplicate efiblk#0 issue
Masahisa Kojima
- [PATCH] efi_driver: fix duplicate efiblk#0 issue
Masahisa Kojima
- [PATCH v2] efi_driver: fix duplicate efiblk#0 issue
Masahisa Kojima
- [PATCH] efi_driver: fix duplicate efiblk#0 issue
Masahisa Kojima
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH 1/4] efi_loader: add RAM disk device path
Masahisa Kojima
- [PATCH 2/4] efi_loader: add EFI_RAM_DISK_PROTOCOL implementation
Masahisa Kojima
- [PATCH 3/4] cmd: efidebug: add RAM disk mount command
Masahisa Kojima
- [PATCH 4/4] efi_selftest: add EFI_RAM_DISK_PROTOCOL selftest
Masahisa Kojima
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH v2 0/6] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH v2 1/6] efi_loader: add RAM disk device path
Masahisa Kojima
- [PATCH v2 2/6] ramdisk: add ramdisk uclass and driver
Masahisa Kojima
- [PATCH v2 3/6] cmd: ramdisk: add ramdisk control command
Masahisa Kojima
- [PATCH v2 4/6] efi_loader: add EFI_RAM_DISK_PROTOCOL implementation
Masahisa Kojima
- [PATCH v2 5/6] cmd: efidebug: add RAM disk mount command
Masahisa Kojima
- [PATCH v2 6/6] efi_selftest: add EFI_RAM_DISK_PROTOCOL selftest
Masahisa Kojima
- [PATCH v2 1/6] efi_loader: add RAM disk device path
Masahisa Kojima
- [PATCH v2 0/6] introduce EFI_RAM_DISK_PROTOCOL
Masahisa Kojima
- [PATCH v2 1/6] efi_loader: add RAM disk device path
Masahisa Kojima
- [PATCH v10 3/4] Boot var automatic management for removable medias
Masahisa Kojima
- [PATCH v2 2/6] ramdisk: add ramdisk uclass and driver
Masahisa Kojima
- [PATCH v2 2/6] ramdisk: add ramdisk uclass and driver
Masahisa Kojima
- [PATCH] efi_loader: check uuid_str_to_bin return value
Masahisa Kojima
- [PATCH] configs: rock64-rk3328_defconfig: Enable ROCKCHIP_EFUSE
Matwey V. Kornilov
- [PATCH] configs: rock64-rk3328_defconfig: Enable ROCKCHIP_EFUSE
Matwey V. Kornilov
- [PATCH] lib: sparse: allocate blkcnt instead of arbitrary small number
Mattijs Korpershoek
- [PATCH] lib: sparse: allocate blkcnt instead of arbitrary small number
Mattijs Korpershoek
- [PATCH v2] lib: sparse: allocate FASTBOOT_MAX_BLK_WRITE instead of small number
Mattijs Korpershoek
- [PATCH v2] lib: sparse: allocate FASTBOOT_MAX_BLK_WRITE instead of small number
Mattijs Korpershoek
- [RFC PATCH 3/4] arm: dts: Fix build of am62a7 dtbs
Mattijs Korpershoek
- [PATCH 4/8] bootstd: Correct creating of bootdev sibling
Mattijs Korpershoek
- [PATCH 3/8] bootstd: Rename bootdev_setup_sibling_blk()
Mattijs Korpershoek
- [PATCH v2 4/9] bootstd: Rename bootdev_setup_sibling_blk()
Mattijs Korpershoek
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Gowtham Suresh Kumar
- [PATCH v5 20/23] doc: board: ti: Update documentation for binman flow
Kumar, Udit
- [PATCH] menu: Ignore prompt variable if timeout is != 0
Traut Manuel LCPF-CH
- AW: EXTERNAL - [PATCH] menu: Ignore prompt variable if timeout is != 0
Traut Manuel LCPF-CH
- AW: [PATCH] cmd: pxe_utils: add some missing tabs
Traut Manuel LCPF-CH
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Corentin Labbe
- [RESEND PATCH v1 1/4] riscv: t-head: licheepi4a: initial support added
Yixun Lan
- [PATCH v2 0/4] riscv: Initial support for Lichee PI 4A board
Yixun Lan
- [PATCH v2 1/4] riscv: t-head: licheepi4a: initial support added
Yixun Lan
- [PATCH v2 2/4] riscv: dts: t-head: Add basic device tree for Sipeed Lichee PI 4A board
Yixun Lan
- [PATCH v2 3/4] configs: th1520_lpi4a_defconfig: Add initial config
Yixun Lan
- [PATCH v2 4/4] doc: t-head: lpi4a: document Lichee PI 4A board
Yixun Lan
- [PATCH] lzma: Fix decompression speed regression
Christophe Leroy
- [PATCH] powerpc: Fix flush_cache() speed regression
Christophe Leroy
- [PATCH] lzma: Fix decompression speed regression
Christophe Leroy
- [PATCH] Add support for SPL MMC load redundant U-Boot
Ayrton Leyssens
- [PATCH] Add support for SPL MMC load redundant U-Boot
Ayrton Leyssens
- [PATCH 0/2] patches used to enable u-boot video driver on raspberry pi 4B platform
Meng Li
- [PATCH 1/2] bcm2835: Add simiple-framebuffer for use with fkms
Meng Li
- [PATCH 2/2] rpi: set the correct parameter for simple framebuffer node
Meng Li
- [PATCH 1/2] riscv: andes_plicsw: Fix IPI during OpenSBI invocation
Leo Liang
- [PATCH 2/2] board: ae350: Add missing env variables for booti
Leo Liang
- [PATCH 1/1] RISC-V: CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS description
Leo Liang
- [PATCH] ci: riscv: Update OpenSBI to v1.2
Leo Liang
- [PULL] u-boot-riscv/riscv-for-next
Leo Liang
- [PATCH v5 03/11] riscv: dts: jh7110: Add ethernet device tree nodes
Leo Liang
- [PATCH v5 04/11] riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B
Leo Liang
- [PATCH v5 05/11] doc: board: starfive: Reword the make defconfig information
Leo Liang
- [PATCH v5 06/11] configs: starfive: Enable ethernet configuration for StarFive VisionFive2
Leo Liang
- [PATCH v5 07/11] eeprom: starfive: Enable ID EEPROM configuration
Leo Liang
- [PATCH v5 08/11] riscv: dts: starfive: Add support eeprom device tree node
Leo Liang
- [PATCH v5 09/11] configs: starfive: Enable ID EEPROM configuration
Leo Liang
- [PATCH v5 10/11] ram: starfive: Read memory size information from EEPROM
Leo Liang
- [PULL] u-boot-riscv/master
Leo Liang
- [PATCH 2/2] doc: visionfive2: apply a trailing space to the prompt
Leo Liang
- [PATCH 1/2] configs: visionfive2: add a trailing space to prompt
Leo Liang
- [PATCH v2 4/4] configs: starfive-jh7110: Add CONFIG_RTL8169
Leo Liang
- [PATCH v2 1/4] net: rtl8169: Fix compile warning in rtl8169
Leo Liang
- [PATCH v2 2/4] net: rtl8169: Fix DMA minimal aligned compile warning in RISC-V
Leo Liang
- [PATCH v2 3/4] net: rtl8169: Add one device ID 0x8161
Leo Liang
- [RESEND PATCH v2] riscv: setup per-hart stack earlier
Leo Liang
- [PATCH v1 1/5] clk: starfive: jh7110: Separate the PLL driver
Leo Liang
- [PATCH v1 2/5] riscv: dts: jh7110: Add PLL clock controller node
Leo Liang
- [PATCH v1 3/5] riscv: dts: jh7110: Add clock source from PLL
Leo Liang
- [PATCH v1 4/5] dt-bindings: clock: jh7110: Modify clock id to be same with Linux
Leo Liang
- [PATCH v1 5/5] clk: starfive: jh7110: Add of_xlate ops and macros for clock id conversion
Leo Liang
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Leo Liang
- [PULL] u-boot-riscv/master
Leo Liang
- [PATCH v7 2/4] starfive: pci: Add StarFive JH7110 pcie driver
Leo Liang
- [PATCH v7 3/4] configs: starfive-jh7110: Add support for PCIe host driver
Leo Liang
- [PATCH v7 4/4] riscv: dts: starfive: Enable PCIe host controller
Leo Liang
- [PATCH v8 1/4] i2c: designware: Add Kconfig for designware_i2c_pci.c
Leo Liang
- [PATCH 1/1] acpi: Add missing RISC-V acpi_table header
Leo Liang
- [PATCH v2 1/1] acpi: Add missing RISC-V acpi_table header
Leo Liang
- [PATCH] riscv: Support riscv64 image type
Leo Liang
- [PATCH 1/1] riscv: qemu: imply CONFIG_DM_RNG
Leo Liang
- [U-BOOT TEST HOOKS][PATCH 1/1] qemu-riscv: enable virtio-rng-pci
Leo Liang
- [PATCH] Remove unused functions
Shenlin Liang
- [PATCH] Remove unused parameters
Shenlin Liang
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Lim, Jit Loon
- [PATCH 1/2] riscv: andes_plicsw: Fix IPI during OpenSBI invocation
Yu Chien Peter Lin
- [PATCH 2/2] board: ae350: Add missing env variables for booti
Yu Chien Peter Lin
- [PATCH v2 0/2] Fix 'no USB device found' error.
Tony Lindgren
- [PATCH v4 1/2] musb-new: ti-musb: Handle usb dual-role feature as peripheral
Tony Lindgren
- [PATCH v1 0/4] Add NPCM8xx more feature support
Jim Liu
- [PATCH v1 1/4] board: nuvoton: arbel: change uboot load address
Jim Liu
- [PATCH v1 2/4] pinctrl: nuvoton: fix reset reason error for poweron
Jim Liu
- [PATCH v1 3/4] misc: npcm_host_intf: change initialization sequence
Jim Liu
- [PATCH v1 4/4] arch: arm: npcm8xx: add cpu version and 4G ram support
Jim Liu
- [PATCH v1] spi: npcm_pspi: use ACTIVE_LOW flag for cs gpio and set default max_hz
Jim Liu
- [PATCH v1 0/4] Add NPCM8xx more feature support
Jim Liu
- [PATCH v2 4/6] net: add fastboot TCP6 support
Paul Liu
- [PATCH 5/6] net: add fastboot TCP documentation and IP6-only mode
Paul Liu
- [PATCH] crc32: Drop duplicates crc header includes
Ilya Lukin
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Anne Macedo
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Anne Macedo
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Anne Macedo
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Anne Macedo
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Anne Macedo
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Anne Macedo
- EFI breaks USB dual port detection - our observations
Suniel Mahesh
- [PATCH 2/2] mxs: Don't enable 4P2 reg if MXS is powered only from DCDC_BATT
Lukasz Majewski
- [PATCH 1/2] config: xea: Disable support for boot methods EXTLINUX and VBE
Lukasz Majewski
- [PATCH 2/2] config: xea: Disable support for FAT file system
Lukasz Majewski
- [PATCH] arm: mxs: Fix ICOLL macro name typo
Lukasz Majewski
- [PATCH] arm: mxs: Clear CPSR V bit to activate low vectors
Lukasz Majewski
- [PATCH v10 3/4] Boot var automatic management for removable medias
Raymond Mao
- [PATCH v10 3/4] Boot var automatic management for removable medias
Raymond Mao
- [PATCH v10 3/4] Boot var automatic management for removable medias
Raymond Mao
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Mario Marietto
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Mario Marietto
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Mario Marietto
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Mario Marietto
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Mario Marietto
- [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Pegorer Massimo
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Pegorer Massimo
- [PATCH 0/4] rockchip: rk3308: improve support for ROCK Pi S
Pegorer Massimo
- [PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
Pegorer Massimo
- [PATCH 2/4] rockchip: rk3308: no DEBUG_UART_BOARD_INIT for ROCK Pi S
Pegorer Massimo
- [PATCH 3/4] rockchip: rk3308: add support for sdmmc boot
Pegorer Massimo
- [PATCH 4/4] rockchip: rk3308: fix same-as-spl boot order
Pegorer Massimo
- [PATCH] configs: rockchip: drop useless DEBUG_UART_SKIP_INIT
Pegorer Massimo
- R: [PATCH 5/7] MAINTAINERS: Fix path typos and similar
Pegorer Massimo
- R: [PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
Pegorer Massimo
- R: Pull request: u-boot-rockchip-20230728
Pegorer Massimo
- [PATCH 00/16] Ten64 updates 2023-07
Mathew McBride
- [PATCH 01/16] board: traverse: ten64: recognize board revision D
Mathew McBride
- [PATCH 02/16] board: traverse: ten64: ensure retimer reset is done on new board revisions
Mathew McBride
- [PATCH 03/16] board: traverse: ten64: fix DPAA2 (network) DPL corruption issue
Mathew McBride
- [PATCH 04/16] board: traverse: ten64: update DPAA2 (network) binary path on sdcards
Mathew McBride
- [PATCH 05/16] board: traverse: ten64: specify bootargs for recovery environment
Mathew McBride
- [PATCH 06/16] board: traverse: ten64: add NAND based OpenWrt bootcmd
Mathew McBride
- [PATCH 07/16] board: ten64: add a bootmenu entries for NAND-based entries
Mathew McBride
- [PATCH 08/16] configs: ten64: enable NVME_PCI
Mathew McBride
- [PATCH 09/16] board: traverse: ten64: init nvme devices in late boot to ensure bootflow availability
Mathew McBride
- [PATCH 10/16] board: traverse: ten64: fix allocation order of MAC addresses
Mathew McBride
- [PATCH 11/16] board: traverse: ten64: set serial# to be 'label' MAC
Mathew McBride
- [PATCH 12/16] board: ten64: disable watchdog autostart
Mathew McBride
- [PATCH 13/16] board: traverse: ten64: adopt standard boot defaults
Mathew McBride
- [PATCH 14/16] arch: arm: fsl-layerscape: allow "opt-out" of fsl_setenv_bootcmd
Mathew McBride
- [PATCH 15/16] board: ten64: opt out of fsl_setenv_bootcmd
Mathew McBride
- [PATCH 16/16] board: ten64: strip extra u-boot compatibles from FDT
Mathew McBride
- [PATCH v2 01/19] test: Restore test behaviour on failure
Bin Meng
- [PATCH v2 04/19] bootstd: Use bootdev instead of bootdevice
Bin Meng
- [PATCH v2 07/19] bootstd: Use the bootargs env var for changing the cmdline
Bin Meng
- [PATCH v2 08/19] bootstd: Allow storing x86 setup information
Bin Meng
- [PATCH v2 10/19] bootstd: Add a function to update a command line
Bin Meng
- [PATCH v2 12/19] x86: qemu: Create a little more room for U-Boot
Bin Meng
- [PATCH v2 13/19] x86: qemu: Switch to standard boot
Bin Meng
- [PATCH v2 18/19] x86: coreboot: Adjust various config options
Bin Meng
- [PATCH v2 19/19] x86: coral: Adjust various config options
Bin Meng
- [PATCH v2 00/19] bootstd: Add a bootmeth for ChromiumOS on x86
Bin Meng
- [PATCH v2 18/19] x86: coreboot: Adjust various config options
Bin Meng
- [PATCH v4 01/45] x86: Return mtrr_add_request() to its old purpose
Bin Meng
- [PATCH v4 02/45] x86: Allow listing MTRRs in SPL
Bin Meng
- [PATCH v4 03/45] x86: mtrr: Add documentation
Bin Meng
- [PATCH v4 04/45] bios_emulator: Add Kconfig and adjust Makefile for SPL
Bin Meng
- [PATCH v4 05/45] bios_emulator: Drop VIDEO_IO_OFFSET
Bin Meng
- [PATCH v4 06/45] x86: Tidy up EFI code in interrupt_init()
Bin Meng
- [PATCH v4 07/45] x86: Add a comment for board_init_f_r_trampoline()
Bin Meng
- [PATCH v4 08/45] x86: Show the CPU physical address size with bdinfo
Bin Meng
- [PATCH v4 09/45] x86: Correct get_sp() implementation for 64-bit
Bin Meng
- [PATCH v4 10/45] x86: Show an error when a BIOS exception occurs
Bin Meng
- [PATCH v4 11/45] acpi: Add a comment to set the acpi tables
Bin Meng
- [PATCH v4 12/45] bdinfo: Show the RAM top and approximate stack pointer
Bin Meng
- [PATCH v4 13/45] part: Allow setting the partition-table type
Bin Meng
- [PATCH v4 14/45] qfw: Show the file address if available
Bin Meng
- [PATCH v4 15/45] log: Tidy up an ambiguous comment.
Bin Meng
- [PATCH v4 16/45] qfw: Set the address of the ACPI tables
Bin Meng
- [PATCH v4 17/45] efi: Show all known UUIDs with CONFIG_CMD_EFIDEBUG
Bin Meng
- [PATCH v4 18/45] x86: Improve the trampoline in 64-bit mode
Bin Meng
- [PATCH v4 19/45] Show the malloc base with the bdinfo command
Bin Meng
- [PATCH v4 20/45] nvme: Provide more useful debugging messages
Bin Meng
- [PATCH 1/2] CI: Update to QEMU 8.0.3
Bin Meng
- [PATCH 1/2] CI: Update to QEMU 8.0.3
Bin Meng
- [PATCH v4 22/45] pci: Allow the video BIOS to work in SPL with QEMU
Bin Meng
- [PATCH v4 23/45] pci: Tidy up logging and reporting for video BIOS
Bin Meng
- [PATCH v4 24/45] x86: Allow video-BIOS code to be built for SPL
Bin Meng
- [PATCH v4 25/45] x86: Pass video settings from SPL to U-Boot proper
Bin Meng
- [PATCH v4 21/45] pci: Support autoconfig in SPL
Bin Meng
- [PATCH v4 26/45] x86: Init video in SPL if enabled
Bin Meng
- [PATCH v4 27/45] pci: Adjust video BIOS debugging to be SPL-friendly
Bin Meng
- [PATCH v4 28/45] pci: Mask the ROM address in case it is already enabled
Bin Meng
- [PATCH v4 29/45] x86: Enable display for QEMU 64-bit
Bin Meng
- [PATCH v4 30/45] x86: Allow logging to be used in SPL reliably
Bin Meng
- [PATCH v4 31/45] fs: fat: Shrink the size of a few strings
Bin Meng
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Bin Meng
- [PATCH v4 33/45] x86: Enable useful options for qemu-86_64
Bin Meng
- [PATCH v4 34/45] x86: Refactor table-writing code a litlle
Bin Meng
- [PATCH v4 35/45] x86: Record the start and end of the tables
Bin Meng
- [PATCH v4 36/45] x86: Show the number of physical address bits
Bin Meng
- [PATCH v4 37/45] x86: Convert some debug statements to use logging
Bin Meng
- [PATCH v4 38/45] x86: link: Support Micron memory
Bin Meng
- [PATCH v4 39/45] x86: Make sure that the LPC is active before SDRAM init
Bin Meng
- [PATCH v4 40/45] log: Support outputing function names in SPL
Bin Meng
- [PATCH v4 41/45] sandbox: Correct header order in board file
Bin Meng
- [PATCH v4 42/45] sandbox: Install ACPI tables on startup
Bin Meng
- [PATCH v4 43/45] efi: Use the installed ACPI tables
Bin Meng
- [PATCH v4 44/45] x86: video: Add a driver for QEMU bochs emulation
Bin Meng
- [PATCH v4 45/45] x86: Switch QEMU over to use the bochs driver
Bin Meng
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Bin Meng
- [PATCH] bootstd: Correct 'bpot' typo
Bin Meng
- [PATCHv2 1/2] CI: Update to QEMU 8.0.3
Bin Meng
- [PATCH 1/1] doc: riscv: running SiFive Unleashed image in QEMU
Bin Meng
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Bin Meng
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Bin Meng
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Bin Meng
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Bin Meng
- [PATCH v5 01/46] bdinfo: Add tests for serial settings
Bin Meng
- [PATCH v5 09/46] x86: Show the CPU physical address size with bdinfo
Bin Meng
- [PATCH v5 10/46] x86: Correct get_sp() implementation for 64-bit
Bin Meng
- [PATCH v5 15/46] qfw: Show the file address if available
Bin Meng
- [PATCH v5 16/46] log: Tidy up an ambiguous comment
Bin Meng
- [PATCH v5 23/46] pci: Allow the video BIOS to work in SPL with QEMU
Bin Meng
- [PATCH v5 27/46] x86: Ensure SPL banner is only shown once
Bin Meng
- [PATCH v5 28/46] x86: Init video in SPL if enabled
Bin Meng
- [PATCH v5 29/46] pci: Adjust video BIOS debugging to be SPL-friendly
Bin Meng
- [PATCH v5 37/46] x86: Record the start and end of the tables
Bin Meng
- [PATCH v5 00/46] x86: Use qemu-x86_64 to boot EFI installers
Bin Meng
- [PATCH v2] x86: Update docs link in bootparam header
Bin Meng
- Please pull u-boot-x86
Bin Meng
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Bin Meng
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Bin Meng
- [PATCH v5 02/46] x86: Return mtrr_add_request() to its old purpose
Bin Meng
- [PATCH 1/1] riscv: define a cache line size for QEMU
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 2/5] video: broadwell: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 3/5] video: ivybridge: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 4/5] video: vesa: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 5/5] x86: Return mtrr_add_request() to its old purpose
Bin Meng
- [PATCH] board_f: Cosmetic style fix
Bin Meng
- [PATCH v2 1/1] riscv: define a cache line size for the generic CPU
Bin Meng
- [PATCH 1/1] riscv: qemu: provide more SPL boot methods
Bin Meng
- [PATCH 00/18] video: bochs: Remove the x86 limitation
Bin Meng
- [PATCH 01/18] dm: video: Cosmetic style fix
Bin Meng
- [PATCH 02/18] video: bochs: Drop inclusion of <asm/mtrr.h>
Bin Meng
- [PATCH 03/18] video: bochs: Drop the useless argument of bochs_vga_write()
Bin Meng
- [PATCH 04/18] video: bochs: Avoid using IO instructions to access VGA IO port
Bin Meng
- [PATCH 05/18] video: bochs: Remove the x86 dependency
Bin Meng
- [PATCH 06/18] video: kconfig: Fix wrong text for the PCI default FB size
Bin Meng
- [PATCH 07/18] video: kconfig: Drop the superfluous dependency
Bin Meng
- [PATCH 08/18] video: kconfig: Set default FB size for Bochs
Bin Meng
- [PATCH 09/18] video: bochs: Set the frame buffer size per configuration
Bin Meng
- [PATCH 10/18] riscv: qemu: Enable Bochs video support
Bin Meng
- [PATCH 11/18] console: kconfig: Drop the redundant VIDEO dependency
Bin Meng
- [PATCH 12/18] console: Make stdio_print_current_devices() static
Bin Meng
- [PATCH 13/18] console: Refactor stdio_print_current_devices() a little bit
Bin Meng
- [PATCH 14/18] console: Print out complete stdio device list
Bin Meng
- [PATCH 15/18] riscv: qemu: Enable PRE_CONSOLE_BUFFER
Bin Meng
- [PATCH 16/18] riscv: define a cache line size for the generic CPU
Bin Meng
- [PATCH 17/18] riscv: qemu: Remove out-of-date "riscv, kernel-start" handling
Bin Meng
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Bin Meng
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Bin Meng
- [PATCH 14/18] console: Print out complete stdio device list
Bin Meng
- [PATCH 14/18] console: Print out complete stdio device list
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH] xhci_register: Fix double free on failure
Bin Meng
- [PATCH 1/1] acpi: Add missing RISC-V acpi_table header
Bin Meng
- [PATCH 00/18] video: bochs: Remove the x86 limitation
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH] x86: Add a little more info to cbsysinfo
Bin Meng
- [PATCH 1/9] x86: spl: Drop unwanted debug()
Bin Meng
- [PATCH 2/9] video: Tidy up Makefile rule for video
Bin Meng
- [PATCH 3/9] x86: Run QEMU machine setup in SPL
Bin Meng
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Bin Meng
- [PATCH 1/1] doc: U-Boot boot phases
Bin Meng
- [PATCH 1/1] riscv: qemu: imply CONFIG_DM_RNG
Bin Meng
- [PATCH 6/9] x86: Correct copying of BIOS mode information
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 1/5] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH v2 5/9] bootstd: Correct creating of bootdev sibling
Bin Meng
- [PATCH v2 7/9] x86: coreboot: Add IDE and SATA
Bin Meng
- [PATCH v2 9/9] x86: coreboot: Enable support for CBFS
Bin Meng
- [PATCH v2 2/9] usb: Return -ENOENT when no devices are found
Bin Meng
- [PATCH v2 3/9] lib: Suppress E when writing error-string output
Bin Meng
- [PATCH v2 4/9] bootstd: Rename bootdev_setup_sibling_blk()
Bin Meng
- [PATCH v2 6/9] bootstd: Add some more debugging in the bootdev uclass
Bin Meng
- [PATCH v2 2/9] video: Tidy up Makefile rule for video
Bin Meng
- [PATCH v2 5/9] bootstd: Correct creating of bootdev sibling
Bin Meng
- [PATCH 00/18] video: bochs: Remove the x86 limitation
Bin Meng
- [PATCH v2 1/6] x86: Change tesing logic of mtrr commit
Bin Meng
- [PATCH v2 2/6] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH v2 3/6] video: broadwell: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH v2 4/6] video: ivybridge: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH v2 5/6] video: vesa: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH v2 6/6] x86: Return mtrr_add_request() to its old purpose
Bin Meng
- [PATCH] cmd: pxe: Update the command help
Bin Meng
- [U-BOOT TEST HOOKS][PATCH 1/1] qemu-riscv: enable virtio-rng-pci
Bin Meng
- [U-BOOT-TEST-HOOKS][PATCH v2 1/1] qemu-riscv: enable virtio-rng-device
Bin Meng
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Bin Meng
- [PATCH v4 32/45] fs: fat: Support reading from a larger block size
Bin Meng
- [PATCH] dm: Correct DM_FLAG_ comment
Bin Meng
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Bin Meng
- [PATCH 4/9] Revert "x86: Switch QEMU over to use the bochs driver"
Bin Meng
- [PATCH v3] x86: Change tesing logic of mtrr commit
Bin Meng
- [PATCH v3] x86: Change tesing logic of mtrr commit
Bin Meng
- [PATCH v2 2/6] x86: fsp: Use mtrr_set_next_var() for graphics memory
Bin Meng
- [PATCH 4/6] arm: dts: k3-am642-r5-evm: Add I2C0 and Card detect GPIOs
Nishanth Menon
- [PATCH 3/6] arm: dts: k3-am642: Sync main_i2c0 with kernel
Nishanth Menon
- [PATCH v4 1/2] musb-new: ti-musb: Handle usb dual-role feature as peripheral
Nishanth Menon
- [PATCH v4 2/2] arm: dts: am335x-evm-u-boot: Remove usb0 mode configuration
Nishanth Menon
- [PATCH 3/6] arm: dts: k3-am642: Sync main_i2c0 with kernel
Nishanth Menon
- [PATCH v5 20/23] doc: board: ti: Update documentation for binman flow
Nishanth Menon
- [RFC PATCH 0/4] arm: dts: Sync k3-am62 with upstream
Nishanth Menon
- [RFC PATCH 1/4] omap: timer: add ti,am654-timer compatibility
Nishanth Menon
- [RFC PATCH 2/4] arm: mach-k3: am62: Add timer0 id to the dev list
Nishanth Menon
- [RFC PATCH 3/4] arm: dts: Fix build of am62a7 dtbs
Nishanth Menon
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [RFC PATCH 2/4] arm: mach-k3: am62: Add timer0 id to the dev list
Nishanth Menon
- [RFC PATCH 2/2] board: ti: am65x: Move to using Extension framework
Nishanth Menon
- [PATCH] arm: mach-k3: *: dev-data: Update to use ARRAY_SIZE
Nishanth Menon
- [RFC PATCH 3/4] arm: dts: Fix build of am62a7 dtbs
Nishanth Menon
- [PATCH] arm: dts: Fix build of am62a7 dtbs
Nishanth Menon
- [RFC PATCH 0/3] Minimal platform configuration
Nishanth Menon
- [PATCH] configs: k2x_evm: Always include FIT loading support
Nishanth Menon
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Nishanth Menon
- [PATCH v7 05/23] j721e: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img
Nishanth Menon
- [PATCH 12/18] include: armv7: Enable distroboot across all configs
Nishanth Menon
- [PATCH 0/2] arm: dts: k3-am6: Sync DT with Linux
Nishanth Menon
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Nishanth Menon
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Nishanth Menon
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Nishanth Menon
- [PATCH 0/3] arm: dts: Sync k3-am62 with upstream
Nishanth Menon
- [PATCH 1/3] omap: timer: add ti,am654-timer compatibility
Nishanth Menon
- [PATCH 2/3] arm: mach-k3: am62: Add timer0 id to the dev list
Nishanth Menon
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Nishanth Menon
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH 0/6] board: ti: Add support for BeaglePlay
Nishanth Menon
- [PATCH 1/6] doc: board: ti: k3: Sort the boards in alphabetical order
Nishanth Menon
- [PATCH 2/6] arm: dts: k3-am625-sk-binman: Add labels for unsigned binary
Nishanth Menon
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Nishanth Menon
- [PATCH 4/6] arm: dts: Add k3-am625-beagleplay
Nishanth Menon
- [PATCH 5/6] configs: Add am62x_beagleplay_* defconfigs
Nishanth Menon
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Nishanth Menon
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Nishanth Menon
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Nishanth Menon
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Nishanth Menon
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Nishanth Menon
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Nishanth Menon
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH V2 0/3] arm: dts: Sync k3-am62 with upstream
Nishanth Menon
- [PATCH V2 1/3] omap: timer: add ti,am654-timer compatibility
Nishanth Menon
- [PATCH V2 2/3] arm: mach-k3: am62: Add timer0 id to the dev list
Nishanth Menon
- [PATCH V2 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH V2 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH 00/16] doc: board: ti: Cleanup documentation
Nishanth Menon
- [PATCH 01/16] doc: board: ti: Optimize sources references
Nishanth Menon
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Nishanth Menon
- [PATCH 03/16] doc: board: ti: am65x: Update with boot flow diagram
Nishanth Menon
- [PATCH 04/16] doc: board: ti: j721e: Update with boot flow diagram
Nishanth Menon
- [PATCH 05/16] doc: board: ti: k3: Reuse build instructions
Nishanth Menon
- [PATCH 06/16] doc: board: ti: j7200: Convert the image format to svg
Nishanth Menon
- [PATCH 07/16] doc: board: ti: j721e: Convert the image format to svg
Nishanth Menon
- [PATCH 08/16] doc: board: ti: am65x: Convert the image format to svg
Nishanth Menon
- [PATCH 09/16] doc: board: ti: am62x: Convert the image format to svg
Nishanth Menon
- [PATCH 10/16] doc: board: ti: am62x_sk: Convert switch settings to list tables
Nishanth Menon
- [PATCH 11/16] doc: board: ti: j7200_evm: Convert switch settings to list tables
Nishanth Menon
- [PATCH 12/16] doc: board: ti: am65x_evm: Convert the UART boot responsibility to list table
Nishanth Menon
- [PATCH 13/16] doc: board: ti: am65/j721e: Convert OSPI memory map to svg
Nishanth Menon
- [PATCH 14/16] doc: board: ti: am65x_evm: Convert the emmc layout to svg
Nishanth Menon
- [PATCH 15/16] doc: board: ti: j7200_evm: Convert the emmc layout to svg
Nishanth Menon
- [PATCH 16/16] doc: board: ti: *: Add platform information
Nishanth Menon
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Nishanth Menon
- [PATCH v2 1/4] net: ti: am65-cpsw-nuss: Use approved property to get efuse address
Nishanth Menon
- [PATCH v2 2/4] net: ti: am65-cpsw-nuss: Get port mode register from standard "phys" property
Nishanth Menon
- [PATCH V3 0/3] arm: dts: Sync k3-am62 with upstream kernel
Nishanth Menon
- [PATCH V3 1/3] omap: timer: add ti,am654-timer compatibility
Nishanth Menon
- [PATCH V3 2/3] arm: mach-k3: am62: Add timer0 id to the dev list
Nishanth Menon
- [PATCH V3 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Nishanth Menon
- [PATCH 06/16] doc: board: ti: j7200: Convert the image format to svg
Nishanth Menon
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Nishanth Menon
- [PATCH 00/16] doc: board: ti: Cleanup documentation
Nishanth Menon
- [PATCH V2 00/19] doc: board: ti: Cleanup documentation
Nishanth Menon
- [PATCH V2 01/19] doc: board: ti: Optimize sources references
Nishanth Menon
- [PATCH V2 02/19] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Nishanth Menon
- [PATCH V2 03/19] doc: board: ti: am65x: Update with boot flow diagram
Nishanth Menon
- [PATCH V2 04/19] doc: board: ti: j721e: Update with boot flow diagram
Nishanth Menon
- [PATCH V2 05/19] doc: board: ti: k3: Reuse build instructions
Nishanth Menon
- [PATCH V2 06/19] doc: board: ti: j7200: Convert the image format to svg
Nishanth Menon
- [PATCH V2 07/19] doc: board: ti: j721e: Convert the image format to svg
Nishanth Menon
- [PATCH V2 08/19] doc: board: ti: am65x: Convert the image format to svg
Nishanth Menon
- [PATCH V2 09/19] doc: board: ti: am62x: Convert the image format to svg
Nishanth Menon
- [PATCH V2 10/19] doc: board: ti: am62x_sk: Add labels to reuse memory map
Nishanth Menon
- [PATCH V2 11/19] doc: board: ti: am62x_sk: Convert switch settings to list tables
Nishanth Menon
- [PATCH V2 12/19] doc: board: ti: j7200_evm: Convert switch settings to list tables
Nishanth Menon
- [PATCH V2 13/19] doc: board: ti: am65x_evm: Convert the UART boot responsibility to list table
Nishanth Menon
- [PATCH V2 14/19] doc: board: ti: am65/j721e: Convert OSPI memory map to svg
Nishanth Menon
- [PATCH V2 15/19] doc: board: ti: am65x_evm: Convert the emmc layout to svg
Nishanth Menon
- [PATCH V2 16/19] doc: board: ti: j7200_evm: Convert the emmc layout to svg
Nishanth Menon
- [PATCH V2 17/19] doc: board: ti: *: Add platform information
Nishanth Menon
- [PATCH V2 18/19] doc: board: ti: k3: Sort the boards in alphabetical order
Nishanth Menon
- [PATCH V2 19/19] board: ti: k3: Convert boot flow ascii flow to svg
Nishanth Menon
- [PATCH V2 0/5] board: ti: Add support for BeaglePlay
Nishanth Menon
- [PATCH V2 1/5] arm: dts: k3-am625-sk-binman: Add labels for unsigned binary
Nishanth Menon
- [PATCH V2 2/5] arm: dts: Add k3-am625-beagleplay
Nishanth Menon
- [PATCH V2 3/5] configs: Add am62x_beagleplay_* defconfigs
Nishanth Menon
- [PATCH V2 4/5] doc: board: ti: Add BeaglePlay documentation
Nishanth Menon
- [PATCH V2 5/5] TMP: board: ti: am62x: Switch over to config fragments
Nishanth Menon
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Nishanth Menon
- [PATCH] docs: boards: ti: add openocd spl debugging docs
Nishanth Menon
- [PATCH] doc: board: ti: Add SPDX License to svg images
Nishanth Menon
- [PATCH V2] doc: board: ti: k3: Add a guide to debugging with OpenOCD
Nishanth Menon
- [PATCH v3 1/6] net: split IP_TCP header into separate IP/IP6 and TCP headers
Dmitrii Merkurev
- [PATCH v3 2/6] net: prepare existing TCP stack to be reused by IP6
Dmitrii Merkurev
- [PATCH v3 3/6] net: introduce TCP/IP6 support
Dmitrii Merkurev
- [PATCH v3 4/6] net: add fastboot TCP6 support
Dmitrii Merkurev
- [PATCH v3 5/6] net: add fastboot TCP documentation and IP6-only mode
Dmitrii Merkurev
- [PATCH v3 6/6] net: update net_ip6 from link_local address when eth device is changed
Dmitrii Merkurev
- [PATCH v2 2/6] net: prepare existing TCP stack to be reused by IP6
Dmitrii Merkurev
- [PATCH v2 3/6] net: introduce TCP/IP6 support
Dmitrii Merkurev
- [PATCH v2 4/6] net: add fastboot TCP6 support
Dmitrii Merkurev
- [PATCH v2 5/6] net: add fastboot TCP documentation and IP6-only mode
Dmitrii Merkurev
- [PATCH 1/1] tools/fdt_add_pubkey: error handling in add_pubkey
Ivan Mikhaylov
- [PATCH v2 9/9] x86: Update qemu documentation
Soeren Moch
- [PATCH 2/6] board: phytec: common: Add imx8m specific EEPROM detection support
Yannic Moog
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Chris Morgan
- [PATCH 0/8] Some fixes for the rockchip dw_mipi_dsi driver
Christopher Morgan
- [PATCH] menu: Ignore prompt variable if timeout is != 0
FUKAUMI Naoki
- [PATCH] menu: Ignore prompt variable if timeout is != 0
FUKAUMI Naoki
- AW: EXTERNAL - [PATCH] menu: Ignore prompt variable if timeout is != 0
FUKAUMI Naoki
- [PATCH v3] board: rockchip: Add Radxa E25 Carrier Board
FUKAUMI Naoki
- [PATCH v1] configs: rockchip: rock5b-rk3588: Enable CONFIG_PCI_INIT_R
Christopher Obbard
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Christopher Obbard
- [bug report] sunxi: H6: no ethernet on Orange Pi One Plus
Christopher Obbard
- [PATCH v1 0/2] Add support for Radxa ROCK 4SE
Christopher Obbard
- [PATCH v1 1/2] arm: rockchip: sync ROCK Pi 4 SoCs from Linux
Christopher Obbard
- [PATCH v1 2/2] arm: rockchip: Add Radxa ROCK 4SE
Christopher Obbard
- [PATCH] configs: rock64-rk3328_defconfig: Enable ROCKCHIP_EFUSE
Christopher Obbard
- Current way of using pinctrl-mvebu
Chris Packham
- Current way of using pinctrl-mvebu
Chris Packham
- [PATCH 0/6] Support for AC5X NAND and AT-x240 board
Chris Packham
- [PATCH 1/6] arm: mvebu: ac5: Add nand-controller node
Chris Packham
- [PATCH 2/6] arm: mvebu: ac5: Define mvebu_get_nand_clock()
Chris Packham
- [PATCH 3/6] mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
Chris Packham
- [PATCH 4/6] mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K
Chris Packham
- [PATCH 5/6] arm: mvebu: Add Allied Telesis x240 board
Chris Packham
- [PATCH 6/6] arm: mvebu: Remove unused alias from RC AC5X dts
Chris Packham
- [PATCH 5/6] arm: mvebu: Add Allied Telesis x240 board
Chris Packham
- [PATCH v2 0/6] Support for AC5X NAND and AT-x240 board
Chris Packham
- [PATCH v2 1/6] arm: mvebu: ac5: Add nand-controller node
Chris Packham
- [PATCH v2 2/6] arm: mvebu: ac5: Define mvebu_get_nand_clock()
Chris Packham
- [PATCH v2 3/6] mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
Chris Packham
- [PATCH v2 4/6] mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K
Chris Packham
- [PATCH v2 5/6] arm: mvebu: Add Allied Telesis x240 board
Chris Packham
- [PATCH v2 6/6] arm: mvebu: Remove unused alias from RC AC5X dts
Chris Packham
- [PATCH] drivers: rtc: max313xx: provide read8/write8
Chris Packham
- [PATCH] i2c: i2c-gpio: Correctly handle new {sda,scl}-gpios bindings
Chris Packham
- [PATCH] arm: mvebu: x240: Use i2c-gpio instead of built in controller
Chris Packham
- [PATCH] arm: mvebu: x240: Use i2c-gpio instead of built in controller
Chris Packham
- [PATCH v2 1/2] i2c: i2c-gpio: Correctly handle new {sda, scl}-gpios bindings
Chris Packham
- [PATCH v2 2/2] arm: mvebu: x240: Use i2c-gpio instead of built in controller
Chris Packham
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Chris Packham
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Chris Packham
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Chris Packham
- [PATCH v4 0/2] Fix 'no USB device found' error.
Julien Panis
- [PATCH v4 1/2] musb-new: ti-musb: Handle usb dual-role feature as peripheral
Julien Panis
- [PATCH v4 2/2] arm: dts: am335x-evm-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH 00/10] Remove unnecessary USBx dr_mode configuration.
Julien Panis
- [PATCH 01/10] arm: dts: dra7-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 02/10] arm: dts: dra71-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 03/10] arm: dts: dra72-evm-revc-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 04/10] arm: dts: dra72-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 05/10] arm: dts: dra76-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 06/10] arm: dts: k3-am642-evm-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH 07/10] arm: dts: k3-am654-r5-base-board-u-boot: Remove usb mode configuration
Julien Panis
- [PATCH 08/10] arm: dts: k3-j7200-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH 09/10] arm: dts: k3-j721e-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 00/11] Remove unnecessary USBx dr_mode configuration.
Julien Panis
- [PATCH v2 01/11] usb: dwc3: Handle unknown mode as otg
Julien Panis
- [PATCH v2 02/11] arm: dts: dra7-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 03/11] arm: dts: dra71-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 04/11] arm: dts: dra72-evm-revc-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 05/11] arm: dts: dra72-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 06/11] arm: dts: dra76-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v2 07/11] arm: dts: k3-am642-evm-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH v2 08/11] arm: dts: k3-am654-r5-base-board-u-boot: Remove usb mode configuration
Julien Panis
- [PATCH v2 09/11] arm: dts: k3-j7200-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH v2 10/11] arm: dts: k3-j721e-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH v2 11/11] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 00/12] Remove unnecessary USBx dr_mode configuration.
Julien Panis
- [PATCH v3 01/12] usb: dwc3: Handle unknown mode as otg
Julien Panis
- [PATCH v3 02/12] arm: dts: dra7-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 03/12] arm: dts: dra71-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 04/12] arm: dts: dra72-evm-revc-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 05/12] arm: dts: dra72-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 06/12] arm: dts: dra76-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 07/12] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Julien Panis
- [PATCH v3 08/12] arm: dts: k3-am654-r5-base-board-u-boot: Remove usb mode configuration
Julien Panis
- [PATCH v3 09/12] usb: cdns3: Handle otg mode as peripheral
Julien Panis
- [PATCH v3 10/12] arm: dts: k3-am642-evm-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH v3 11/12] arm: dts: k3-j7200-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH v3 12/12] arm: dts: k3-j721e-common-proc-board-u-boot: Remove usb0 mode configuration
Julien Panis
- [PATCH 0/2] add a trailing space to prompt for visionfive2 board
Chanho Park
- [PATCH 1/2] configs: visionfive2: add a trailing space to prompt
Chanho Park
- [PATCH 2/2] doc: visionfive2: apply a trailing space to the prompt
Chanho Park
- [PATCH 1/1] RISC-V: CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS description
Anup Patel
- [PATCH v3 0/7] clk: Switch from soc_clk_dump to clk_ops function
Igor Prusov
- [PATCH v3 1/7] clk: zynq: Move soc_clk_dump to Zynq clock driver
Igor Prusov
- [PATCH v3 2/7] clk: ast2600: Move soc_clk_dump function
Igor Prusov
- [PATCH v3 3/7] clk: k210: Move soc_clk_dump function
Igor Prusov
- [PATCH v3 4/7] clk: Add dump operation to clk_ops
Igor Prusov
- [PATCH v3 5/7] cmd: clk: Use dump function from clk_ops
Igor Prusov
- [PATCH v3 6/7] clk: treewide: switch to clock dump from clk_ops
Igor Prusov
- [PATCH v3 7/7] cmd: clk: Make soc_clk_dump static
Igor Prusov
- [PATCH v3 0/7] clk: Switch from soc_clk_dump to clk_ops function
Igor Prusov
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Andre Przywara
- [PATCH 00/20] sunxi: Allwinner T113s support
Andre Przywara
- [PATCH 01/20] net: sunxi_emac: chase DT nodes to find PHY regulator
Andre Przywara
- [PATCH 02/20] sunxi: remove CONFIG_MACPWR
Andre Przywara
- [PATCH 03/20] pinctrl: sunxi: add GPIO in/out wrappers
Andre Przywara
- [PATCH 04/20] pinctrl: sunxi: remove struct sunxi_gpio
Andre Przywara
- [PATCH 05/20] pinctrl: sunxi: move pinctrl code and remove GPIO_EXTRA_HEADER
Andre Przywara
- [PATCH 06/20] pinctrl: sunxi: move PIO_BASE into sunxi_gpio.h
Andre Przywara
- [PATCH 07/20] pinctrl: sunxi: add new D1 pinctrl support
Andre Przywara
- [PATCH 08/20] sunxi: introduce NCAT2 generation model
Andre Przywara
- [PATCH 09/20] pinctrl: sunxi: add Allwinner D1 pinctrl description
Andre Przywara
- [PATCH 10/20] clk: sunxi: Add support for the D1 CCU
Andre Przywara
- [PATCH 11/20] sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup
Andre Przywara
- [PATCH 12/20] sunxi: clock: support D1/R528 PLL6 clock
Andre Przywara
- [PATCH 13/20] sunxi: clock: h6: prepare for PRCM less SoCs
Andre Przywara
- [PATCH 14/20] Kconfig: sunxi: prepare for using drivers/ram/sunxi
Andre Przywara
- [PATCH 15/20] sunxi: add R528/T113-s3/D1(s) DRAM initialisation code
Andre Przywara
- [PATCH 16/20] sunxi: add Allwinner R528/T113 SoC support
Andre Przywara
- [PATCH 17/20] sunxi: refactor serial base addresses to avoid asm/arch/cpu.h
Andre Przywara
- [PATCH 18/20] riscv: dts: allwinner: Add the D1/D1s SoC devicetree
Andre Przywara
- [PATCH 19/20] ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
Andre Przywara
- [PATCH 20/20] sunxi: add MangoPi MQ-R board support
Andre Przywara
- Pull request: u-boot-sunxi/master for 2023.10
Andre Przywara
- [PATCH 02/20] sunxi: remove CONFIG_MACPWR
Andre Przywara
- [PATCH] sunxi: remove CONFIG_SATAPWR
Andre Przywara
- [PATCH v2 0/2] Fix 'no USB device found' error.
Roger Quadros
- [PATCH v2 0/2] Fix 'no USB device found' error.
Roger Quadros
- [PATCH 0/6] ti: k3-am642: Add daughtercard support
Roger Quadros
- [PATCH 1/6] board: ti: am64x: Recognize AM64-HSEVM
Roger Quadros
- [PATCH 2/6] board: ti: am64x: Add HSE NAND card detection support
Roger Quadros
- [PATCH 3/6] arm: dts: k3-am642: Sync main_i2c0 with kernel
Roger Quadros
- [PATCH 4/6] arm: dts: k3-am642-r5-evm: Add I2C0 and Card detect GPIOs
Roger Quadros
- [PATCH 5/6] arm: dts: k3-am642: Add I2C GPIO Expander
Roger Quadros
- [PATCH 6/6] configs: am64x_evm_a53_defconfig: Enable I2C GPIO drivers
Roger Quadros
- [PATCH 1/6] board: ti: am64x: Recognize AM64-HSEVM
Roger Quadros
- [PATCH v2 0/2] Fix 'no USB device found' error.
Roger Quadros
- [PATCH v4 0/2] Fix 'no USB device found' error.
Roger Quadros
- [PATCH 3/6] arm: dts: k3-am642: Sync main_i2c0 with kernel
Roger Quadros
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Roger Quadros
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Roger Quadros
- [RFC PATCH 0/2] board: ti: Use Extension framework
Roger Quadros
- [RFC PATCH 1/2] board: ti: common: Add CONFIG_TI_CAPE_DETECT for cape detection
Roger Quadros
- [RFC PATCH 2/2] board: ti: am65x: Move to using Extension framework
Roger Quadros
- [PATCH 0/2] arm: dts: k3-am6: Sync DT with Linux
Roger Quadros
- [PATCH 1/2] arm: dts: k3-am64: Sync DT with Linux
Roger Quadros
- [PATCH 2/2] board: ti: am64x: Recognize AM64-HSEVM
Roger Quadros
- [PATCH v2 00/11] Remove unnecessary USBx dr_mode configuration.
Roger Quadros
- [RFC PATCH 2/2] board: ti: am65x: Move to using Extension framework
Roger Quadros
- [PATCH v3 00/12] Remove unnecessary USBx dr_mode configuration.
Roger Quadros
- [PATCH 0/2] arm: dts: k3-am6: Sync DT with Linux
Roger Quadros
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Roger Quadros
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Roger Quadros
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH 4/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH 2/4] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Roger Quadros
- [PATCH 1/4] pinctrl: Create a select_state variant with the ofnode
Roger Quadros
- [PATCH 0/2] net: ti: am65-cpsw-nuss: Drop custom property "mac_efuse"
Roger Quadros
- [PATCH 1/2] net: ti: am65-cpsw-nuss: Use approved property to get efuse address
Roger Quadros
- [RFC PATCH 2/2] arm: dts: k3-am625-sk-u-boot.dtsi: drop mac_efuse
Roger Quadros
- [PATCH 4/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH] usb: cdns3: gadget: Configure speed in udc_start
Roger Quadros
- [PATCH v2 1/3] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Roger Quadros
- [PATCH v2 2/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH v2 3/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH v2 0/4] net: ti: am65-cpsw-nuss: Drop custom properties
Roger Quadros
- [PATCH v2 1/4] net: ti: am65-cpsw-nuss: Use approved property to get efuse address
Roger Quadros
- [PATCH v2 2/4] net: ti: am65-cpsw-nuss: Get port mode register from standard "phys" property
Roger Quadros
- [RFC PATCH v2 3/4] arm: dts: k3-am625-sk-u-boot.dtsi: drop mac_efuse
Roger Quadros
- [RFC PATCH v2 4/4] arm: dts: k3-am625-sk-u-boot.dtsi: drop cpsw-phy-sel property
Roger Quadros
- [PATCH v2 1/3] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Roger Quadros
- [PATCH v2 3/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Roger Quadros
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Roger Quadros
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Roger Quadros
- [PATCH V2 0/3] arm: dts: Sync k3-am62 with upstream
Roger Quadros
- [PATCH v2 0/2] arm: dts: k3-am6: Sync DT with Linux
Roger Quadros
- [PATCH v2 1/2] board: ti: am64x: Recognize AM64-HSEVM
Roger Quadros
- [PATCH v2 2/2] arm: dts: k3-am64: Sync DT with Linux v6.5-rc1
Roger Quadros
- [PATCH v2 0/2] arm: dts: k3-am6: Sync DT with Linux
Roger Quadros
- [PATCH] drivers: led: bcm6858: do not use null label to find the top
Philippe REYNES
- [PATCH] drivers: led: bcm6858: do not use null label to find the top
Philippe REYNES
- [PATCH] arm: mach-k3: am62a7_init: Open up FSS_DAT_REG3 firewall
Vignesh Raghavendra
- data abort when run 'dhcp'
Miquel Raynal
- data abort when run 'dhcp'
Miquel Raynal
- data abort when run 'dhcp'
Miquel Raynal
- [PATCH 0/2] Fix network commands w/ USB Eth gadget
Miquel Raynal
- [PATCH 1/2] net: eth-uclass: Prevent data aborts with the Ethernet USB gadget
Miquel Raynal
- [PATCH 2/2] net: tftp: Prevent too early device removal leading to data aborts
Miquel Raynal
- data abort when run 'dhcp'
Miquel Raynal
- [PATCH 0/2] Fix network commands w/ USB Eth gadget
Miquel Raynal
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Miquel Raynal
- [PATCH 0/2] clk: fix a bug in CCF which results in a clock being enabled twice.
Yang Xiwen via B4 Relay
- [PATCH 1/2] clk: move clk_get_ops() to a common header
Yang Xiwen via B4 Relay
- [PATCH 2/2] clk: ccf: invoke ops provided by clk directly
Yang Xiwen via B4 Relay
- [PATCH 0/2] net: add support for HiSilicon Fast Ethernet Controller driver
Yang Xiwen via B4 Relay
- [PATCH 1/2] net: add hifemac Ethernet driver for HiSilicon platform
Yang Xiwen via B4 Relay
- [PATCH 2/2] net: add hifemac_mdio MDIO bus driver for HiSilicon platform
Yang Xiwen via B4 Relay
- [PATCH] clk: also return NULL for -ENOENT in devm_clk_get_optional functions
Yang Xiwen via B4 Relay
- [PATCH 0/6] PHYTEC SoM detection for phyCORE-i.MX8MP
Teresa Remmet
- [PATCH 1/6] board: phytec: Add common PHYTEC SoM detection
Teresa Remmet
- [PATCH 2/6] board: phytec: common: Add imx8m specific EEPROM detection support
Teresa Remmet
- [PATCH 3/6] board: phytec: phycore-imx8mp: Add EEPROM detection initialisation
Teresa Remmet
- [PATCH 4/6] board: phytec: phycore_imx8mp: Update 2GB RAM Timings
Teresa Remmet
- [PATCH 5/6] board: phytec: common: phytec_som_detection: Add helper for PCB revision
Teresa Remmet
- [PATCH 6/6] board: phytec: phycore_imx8mp: Add 4000MTS RAM timings based on PCB rev
Teresa Remmet
- [PATCH v2 0/4] riscv: Initial support for Lichee PI 4A board
Guo Ren
- [PATCH] doc: fix typo in README.usb
Enguerrand de Ribaucourt
- [PATCH] spl: spl_legacy: Fix spl_end address
Tom Rini
- Pull request efi-2023-07-rc6
Tom Rini
- [PATCH v2 0/2] Fix 'no USB device found' error.
Tom Rini
- [PATCH] rockchip: Restore support for boot scripts in legacy image format
Tom Rini
- [PATCH] doc: imx: habv4: Fix typo in 'signing'
Tom Rini
- [PATCH v2 1/3] sunxi: u-boot-spl.lds: Pass _image_binary_end
Tom Rini
- [PATCH v2 2/3] microblaze: u-boot-spl.lds: Pass _image_binary_end
Tom Rini
- [PATCH v2 3/3] spl: spl_legacy: Fix spl_end address
Tom Rini
- U-Boot v2023.07-rc6 released
Tom Rini
- v2023.07-rc5 regression: Image overlaps SPL
Tom Rini
- v2023.07-rc5 regression: Image overlaps SPL
Tom Rini
- v2023.07-rc5 regression: Image overlaps SPL
Tom Rini
- v2023.07-rc5 regression: Image overlaps SPL
Tom Rini
- [PATCH V5 0/9] Update SPL splashscreen framework for AM62x
Tom Rini
- [GIT PULL] Please pull u-boot-pmic next
Tom Rini
- [PATCH] git-mailrc: add alias for Eugen Hristev
Tom Rini
- [PATCH v2] colibri-imx7: Call fdt_increase_size()
Tom Rini
- v2023.07-rc5 regression: Image overlaps SPL
Tom Rini
- [PATCH 1/1] tools: spkgimage: correct printf specifier
Tom Rini
- [PATCH] lib: sparse: allocate blkcnt instead of arbitrary small number
Tom Rini
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PULL] u-boot-riscv/riscv-for-next
Tom Rini
- [PULL] u-boot-usb/master
Tom Rini
- [PATCH] x86: Update docs link in bootparam header
Tom Rini
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Tom Rini
- [PATCH] MAINTAINERS: correct at91 tree link
Tom Rini
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH] tools/docker: Dockerfile: Don't specify dtc submodule
Tom Rini
- [PATCH] doc: fix typo in README.usb
Tom Rini
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Tom Rini
- [PATCH v3 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH v3 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Tom Rini
- [PATCH] net: ti: am65-cpsw-nuss: Use dedicated port mode control registers
Tom Rini
- [PATCH v2 1/6] Kbuild: Fix cleanup of generated sources in tools
Tom Rini
- [PATCH v2 2/6] Adjust gitignore for tools/generated/
Tom Rini
- [PATCH v2 3/6] Kbuild: Fix cleanup of VPL
Tom Rini
- [PATCH v2 4/6] Kbuild: Fix cleanup of *.dtb for some archs
Tom Rini
- [PATCH v2 5/6] Kbuild: Fix cleanup of *.dtbo for sandbox
Tom Rini
- [PATCH v2 6/6] test: Find leftovers after clean/mrproper
Tom Rini
- [PATCH] cmd: CONFIG_CMD_SAVES depends on CONFIG_CMD_LOADS
Tom Rini
- [PATCH] common: Kconfig: SYS_CONSOLE_ENV_OVERWRITE depends on SYS_CONSOLE_IS_IN_ENV
Tom Rini
- [PATCH] tpl: Kconfig: TPL_BANNER_PRINT depends on DEBUG_UART && TPL_SERIAL
Tom Rini
- [PATCH] sysreset: Change Kconfig GPIO dependency
Tom Rini
- Pull request efi-2023-07-rc7
Tom Rini
- [PATCH] common: Kconfig: Fix CMD_BMP/BMP dependency
Tom Rini
- [PATCH u-boot 0/3] Revert broken Bootmenu commits
Tom Rini
- [PATCH 10/10] arm: dts: keystone-k2e-evm-u-boot: Remove usb1 mode configuration
Tom Rini
- [PATCH v14 11/11] arm_ffa: efi: corstone1000: enable MM communication
Tom Rini
- [GIT PULL] Please pull fsl-qoirq-2023-7-6 for next
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- [ANN] U-Boot v2023.07 released
Tom Rini
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Tom Rini
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Tom Rini
- R: [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Tom Rini
- Pull request efi-2023-07-rc7
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [PATCH v4 0/4] SPL NVMe support
Tom Rini
- Please pull u-boot-dm
Tom Rini
- Please pull u-boot-dm
Tom Rini
- [PULL] u-boot-riscv/master
Tom Rini
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tom Rini
- Please pull u-boot-dm
Tom Rini
- [PATCH] Azure: Add excludes to the imx8_imx9 job
Tom Rini
- Please pull u-boot-dm
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Tom Rini
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Tom Rini
- [PATCH 1/2] CI: Update to QEMU 8.0.3
Tom Rini
- [PATCH 2/2] CI: Update to the latest "Jammy" tag
Tom Rini
- [PATCH 1/2] CI: Update to QEMU 8.0.3
Tom Rini
- [PATCHv2 1/2] CI: Update to QEMU 8.0.3
Tom Rini
- [GIT PULL] Please pull fsl-qoirq-2023-7-6 for next
Tom Rini
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Tom Rini
- [PATCH 2/2] CI: Update to the latest "Jammy" tag
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Tom Rini
- [PATCH 1/5] mips: octeon: Correct types in cvmx-pko3-queue
Tom Rini
- [PATCH 2/5] arm: mx5: Correct mxc_set_clock function prototype
Tom Rini
- [PATCH 3/5] spl: Correct spl_board_boot_device function prototype
Tom Rini
- [PATCH 4/5] CI: Update to gcc-13.1.0
Tom Rini
- [PATCH 5/5] CI: Update to the latest "Jammy" tag
Tom Rini
- [PATCH 4/5] CI: Update to gcc-13.1.0
Tom Rini
- Pull request: please pull u-boot-imx-20230713
Tom Rini
- Please pull u-boot-marvell/master
Tom Rini
- Pull request: u-boot-spi/master
Tom Rini
- [PATCH 00/40] expo: Add an initial configuration editor
Tom Rini
- [PATCH v2] bdinfo: Correct use of assertions
Tom Rini
- [PATCH v3 00/18] bootstd: Add a bootmeth for ChromiumOS on x86
Tom Rini
- [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Tom Rini
- [PATCH] stdio: Remove stdio_init()
Tom Rini
- [PATCH] .mailmap: Correct entires for Masahiro Yamada
Tom Rini
- [PATCH v1 1/4] ARM: config: Enable config to decompress the FIT image
Tom Rini
- [PATCH v1 1/4] board: nuvoton: arbel: change uboot load address
Tom Rini
- [PATCH] clk: scmi: claim the dependency on CONFIG_CLK
Tom Rini
- [PATCH] hash: fix a memory leak
Tom Rini
- [PATCH] firmware: scmi: return a right errno for SCMI status code
Tom Rini
- [PATCH v2] env: mmc: statically set the environment partition name
Tom Rini
- [v1] disable NFS support by default
Tom Rini
- [PATCH] net: ti: am65-cpsw-nuss: Use dedicated port mode control registers
Tom Rini
- [PATCH] lib/zlib: Fix a bug when getting a gzip header extra field
Tom Rini
- [PATCH v2] board_f: Relocate fdt even if GD_FLG_SKIP_RELOC is set
Tom Rini
- [PATCH] drivers: led: bcm6753: do not use null label to find the top
Tom Rini
- [PATCH] ufs: Use 'TASK_TAG' to construct the ucd_req_ptr->header.dword_0
Tom Rini
- [PATCH] lzma: Fix decompression speed regression
Tom Rini
- [PATCH] powerpc: Fix flush_cache() speed regression
Tom Rini
- [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Tom Rini
- [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Tom Rini
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- Pull request efi-2023-10-rc1
Tom Rini
- Please pull u-boot-video
Tom Rini
- [PATCH v4 0/4] SPL NVMe support
Tom Rini
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Tom Rini
- Please pull u-boot-x86
Tom Rini
- [PATCH] arm: omap2: Fix warning in force_emif_self_refresh
Tom Rini
- [PATCH] arm: sunxi: Correct warning in board_fit_config_name_match
Tom Rini
- [PATCH] drivers: led: bcm6858: do not use null label to find the top
Tom Rini
- [PATCH v2] dfu: Add proper dependency for CONFIG_DFU_MMC
Tom Rini
- [PATCH] disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS
Tom Rini
- [PATCH] bootstd: Correct 'bpot' typo
Tom Rini
- [PATCH] Makefile: Add missing quotes around sort --field-separator
Tom Rini
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Tom Rini
- [PATCH] android_ab: Add option to skip decrementing tries
Tom Rini
- [PATCH] tests: Fix exception when cleaning up skipped test
Tom Rini
- [PATCH v2 1/5] dm: test: Fix partition test to use mmc2
Tom Rini
- [PATCH v2 2/5] dm: test: Improve partition test error output
Tom Rini
- [PATCH v2 3/5] disk: part: Add API to get partitions with specific driver
Tom Rini
- [PATCH v2 4/5] dm: test: Add test for part_get_info_by_type
Tom Rini
- [PATCH v2 5/5] cmd: mbr: Force DOS driver to be used for verify
Tom Rini
- [PATCH] android_ab: Try backup booloader_message
Tom Rini
- [PATCH] env: Fix default environment saving issue
Tom Rini
- [PATCH 1/5] MAINTAINERS: Correct minor mistakes on some file listings
Tom Rini
- [PATCH 2/5] MAINTAINERS: Add some missing defconfig files to existing entries
Tom Rini
- [PATCH 3/5] rockchip: Add MAINTAINERS entry for Radxa Rock 4C+
Tom Rini
- [PATCH 4/5] sunxi: Add MAINTAINERS entry for Lctech Pi F1C200s
Tom Rini
- [PATCH 5/5] MAINTAINERS: Re-order CAAM section
Tom Rini
- [PATCH 1/7] arm: Remove more remnants of bcmcygnus
Tom Rini
- [PATCH 2/7] arm: Remove leftover MAINTAINERS files
Tom Rini
- [PATCH 3/7] xes: Remove leftover code
Tom Rini
- [PATCH 4/7] MAINTAINERS: Add a number of "common" directories
Tom Rini
- [PATCH 5/7] MAINTAINERS: Fix path typos and similar
Tom Rini
- [PATCH 6/7] MAINTAINERS: Deal with '+' in paths
Tom Rini
- [PATCH 7/7] MAINTAINERS: Add some missing directories or files
Tom Rini
- R: [PATCH 5/7] MAINTAINERS: Fix path typos and similar
Tom Rini
- [PATCH V2 0/2] Fix warnings occurred during compilation
Tom Rini
- [PATCH] drivers: led: bcm6858: do not use null label to find the top
Tom Rini
- [EXTERNAL] Re: [PATCH V2 0/2] Fix warnings occurred during compilation
Tom Rini
- [RFC PATCH 1/3] scripts: kconfig: Add config fragment support in board/../
Tom Rini
- [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [PATCH v1 0/2] Add support for Radxa ROCK 4SE
Tom Rini
- [PATCH] Azure: Rework our Rockchip jobs slightly
Tom Rini
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Tom Rini
- [PATCH v2 3/4] usb: gadget: ether: Move probe function above driver structure
Tom Rini
- [PATCH v2 2/4] usb: gadget: ether: Inline functions used once
Tom Rini
- [PATCH v4 1/2] board/km/cent2: add include common.h
Tom Rini
- [PATCH v4 2/2] event: Add fpga load event
Tom Rini
- Pull request efi-2023-10-rc1-2
Tom Rini
- [PATCH v5] event: Add fpga load event
Tom Rini
- data abort when run 'dhcp'
Tom Rini
- [PATCH] travis-ci: Add m68k M5208EVBE machine
Tom Rini
- [PATCH] buildman: Switch ARC toolchain to the upstream version
Tom Rini
- [PATCH] tools/docker: Dockerfile: Don't specify dtc submodule
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [PATCH] Azure: Add excludes to the imx8_imx9 job
Tom Rini
- [PATCHv2 1/2] CI: Update to QEMU 8.0.3
Tom Rini
- [PATCH 1/5] mips: octeon: Correct types in cvmx-pko3-queue
Tom Rini
- [PATCH 2/5] arm: mx5: Correct mxc_set_clock function prototype
Tom Rini
- [PATCH 3/5] spl: Correct spl_board_boot_device function prototype
Tom Rini
- [PATCH 4/5] CI: Update to gcc-13.1.0
Tom Rini
- [PATCH 5/5] CI: Update to the latest "Jammy" tag
Tom Rini
- [PATCH] Azure: Rework our Rockchip jobs slightly
Tom Rini
- Please pull u-boot-dm
Tom Rini
- [u-boot-test-hooks PATCH 1/1] qemu_arm64_na: enable semihosting
Tom Rini
- [PATCH 1/1] spl: boot always fail on CONFIG_SHOW_ERRORS=y
Tom Rini
- [GIT PULL] xilinx patches for v2023.10-rc1 v2
Tom Rini
- Pull request: u-boot-sunxi/master for 2023.10
Tom Rini
- [PATCH 3/6] net: ti: am65-cpsw-nuss: Add logic to support MDIO reset
Tom Rini
- [PATCH v2 0/3] arm: mach-k3: am62: Add core number, gpu and pru autodetection FDT fixups
Tom Rini
- [PATCH V6 00/10] Update SPL splashscreen framework for AM62x
Tom Rini
- [PATCH 1/1] part: check CONFIG_IS_ENABLED(ENV_SUPPORT)
Tom Rini
- [PATCH V2 1/2] board: ti: am62x: evm: Include necessary header files
Tom Rini
- [PATCH V2 2/2] common: splash_source: Fix type casting errors
Tom Rini
- [PATCH] arm: mach-k3: am62a7_init: Open up FSS_DAT_REG3 firewall
Tom Rini
- [PATCH] arm: mach-k3: *: dev-data: Update to use ARRAY_SIZE
Tom Rini
- [PATCH] arm: dts: Fix build of am62a7 dtbs
Tom Rini
- [PATCH] configs: k2x_evm: Always include FIT loading support
Tom Rini
- [PATCH] arm: omap2: Fix warning in force_emif_self_refresh
Tom Rini
- [PATCH] ram: k3-ddrss: do not touch ctrl regs during training
Tom Rini
- [PATCH] arm: mach-k3: am62a7: change some prints to debug prints
Tom Rini
- [PATCH 0/2] Fix network commands w/ USB Eth gadget
Tom Rini
- [PATCH 0/2] Fix network commands w/ USB Eth gadget
Tom Rini
- [PATCH v8 01/23] binman: ti-board-config: Add support for TI board config binaries
Tom Rini
- [PATCH 01/18] arch: mach-k3: security: fix the check for authentication
Tom Rini
- [PATCH v2 1/1] spl: initialize PCI before booting from MMC
Tom Rini
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Tom Rini
- [PULL] u-boot-riscv/master
Tom Rini
- [PULL] u-boot-at91-fixes-2023.10-a
Tom Rini
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Tom Rini
- [PATCH v2 1/1] spl: initialize PCI before booting from MMC
Tom Rini
- [PATCH 14/18] console: Print out complete stdio device list
Tom Rini
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Tom Rini
- [PATCH v15 00/10] introduce Arm FF-A support
Tom Rini
- Please pull u-boot-dm
Tom Rini
- [PATCH v2 1/1] spl: initialize PCI before booting
Tom Rini
- [PATCH v2 1/1] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Tom Rini
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Tom Rini
- [PATCH v15 00/10] introduce Arm FF-A support
Tom Rini
- [PATCH v15 00/10] introduce Arm FF-A support
Tom Rini
- [PATCH v2 1/1] spl: initialize PCI before booting
Tom Rini
- [PATCH] doc: ti: Clarify required file names for K3 platforms
Tom Rini
- [PATCH] buildman: Specify the output directory in tests
Tom Rini
- [PATCH 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Tom Rini
- [PATCH] ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
Tom Rini
- [PATCH 1/2] ti: keystone2: Imply NFS command support
Tom Rini
- [PATCH 2/2] ti: keystone2: Move common Kconfig selections to under ARCH_KEYSTONE
Tom Rini
- [PATCH 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Tom Rini
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Tom Rini
- [PATCH v2 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Tom Rini
- [PATCH v2 2/2] configs: keystone2: Change to using env files
Tom Rini
- [PATCH v15 00/10] introduce Arm FF-A support
Tom Rini
- [u-boot-test-hooks 1/4] bin/flash.sdwire_common_mount: Switch to sourcing the next writer script
Tom Rini
- [u-boot-test-hooks 2/4] bin/writer.rpi*mount: Rework to support all current Pi platforms
Tom Rini
- [u-boot-test-hooks 3/4] bin/writer.ti-omap_mount: Add support for TI OMAP-style platforms via mount
Tom Rini
- [u-boot-test-hooks 4/4] bin/writer.ti-k3_mount: Add support for TI K3 platforms via mount
Tom Rini
- [PATCH] MAINTAINERS: Take maintainership of TI KeyStone2 support
Tom Rini
- [PATCH] mailbox: k3-sec-proxy: Fill non-message tx data fields with 0x0
Tom Rini
- [PATCH] drivers: led: bcm6858: do not use null label to find the top
Tom Rini
- [PATCH v2] lib: sparse: allocate FASTBOOT_MAX_BLK_WRITE instead of small number
Tom Rini
- [PATCH] drivers: rtc: max313xx: provide read8/write8
Tom Rini
- [PATCH] fwu: Allow code to properly decode trial state
Tom Rini
- [PATCH] fwu: mtd: Fix dfu_alt_info generation for 2 images per bank
Tom Rini
- [PATCH] fwu: Show number of attempts in Trial State
Tom Rini
- [PATCH] common: define time_t as 64bit
Tom Rini
- [PATCH 1/1] test: avoid function name 'setup'
Tom Rini
- [PATCH] .mailmap: Correct entries for Masahiro Yamada
Tom Rini
- [PATCH 1/1] part: eliminate part_get_info_by_name_type()
Tom Rini
- [PATCH 1/5] MAINTAINERS: Correct minor mistakes on some file listings
Tom Rini
- [PATCH 2/5] MAINTAINERS: Add some missing defconfig files to existing entries
Tom Rini
- [PATCH 3/5] rockchip: Add MAINTAINERS entry for Radxa Rock 4C+
Tom Rini
- [PATCH 4/5] sunxi: Add MAINTAINERS entry for Lctech Pi F1C200s
Tom Rini
- [PATCH 5/5] MAINTAINERS: Re-order CAAM section
Tom Rini
- [PATCH 1/7] arm: Remove more remnants of bcmcygnus
Tom Rini
- [PATCH 2/7] arm: Remove leftover MAINTAINERS files
Tom Rini
- [PATCH 3/7] xes: Remove leftover code
Tom Rini
- [PATCH 4/7] MAINTAINERS: Add a number of "common" directories
Tom Rini
- [PATCH 5/7] MAINTAINERS: Fix path typos and similar
Tom Rini
- [PATCH 6/7] MAINTAINERS: Deal with '+' in paths
Tom Rini
- [PATCH 7/7] MAINTAINERS: Add some missing directories or files
Tom Rini
- [PATCH] Makefile: Use sort shortopts
Tom Rini
- [ANN] U-Boot v2023.10-rc1 released
Tom Rini
- [PATCH 1/6] doc: board: ti: k3: Sort the boards in alphabetical order
Tom Rini
- [PATCH 2/6] arm: dts: k3-am625-sk-binman: Add labels for unsigned binary
Tom Rini
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Tom Rini
- [PATCH 4/6] arm: dts: Add k3-am625-beagleplay
Tom Rini
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Tom Rini
- [PATCH v2 1/1] spl: initialize PCI before booting
Tom Rini
- [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce
Tom Rini
- [PATCH 1/4] vexpress64: Rework MAINTAINERS file slightly
Tom Rini
- [PATCH 2/4] board/freescale: Drop two orphaned entries
Tom Rini
- [PATCH 3/4] rzn1-snarc: Add missing MAINTAINERS file
Tom Rini
- [PATCH 4/4] board/renesas: Add missing MAINTAINERS files
Tom Rini
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Tom Rini
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Tom Rini
- [PULL] Please pull u-boot-coldfire/master
Tom Rini
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Tom Rini
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Tom Rini
- [PATCH v3 0/3] board: rockchip: Add Hardkernel ODROID-M1
Tom Rini
- [PATCH v16 10/10] arm_ffa: efi: corstone1000: enable MM communication
Tom Rini
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Tom Rini
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Tom Rini
- [PATCH 6/6] doc: board: ti: Add beagleplay documentation
Tom Rini
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Tom Rini
- [PATCH v5 06/12] Dockerfile: capsule: Setup the files needed for capsule update testing
Tom Rini
- [PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
Tom Rini
- [PATCH v16 09/10] arm_ffa: efi: introduce FF-A MM communication
Tom Rini
- [PATCH 01/16] doc: board: ti: Optimize sources references
Tom Rini
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Tom Rini
- [PATCH 00/16] doc: board: ti: Cleanup documentation
Tom Rini
- [PATCH 05/16] doc: board: ti: k3: Reuse build instructions
Tom Rini
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Tom Rini
- [PULL] u-boot-usb/master
Tom Rini
- [tom.rini at gmail.com: Fwd: New Defects reported by Coverity Scan for Das U-Boot]
Tom Rini
- [PATCH 1/2] net: phy: Factor out PHY GPIO reset code
Tom Rini
- [PATCH v5 3/6] mips: add a ls1c300 based board
Tom Rini
- [PATCH v5 1/6] mips: initial build infrastructure for loongson SoCs
Tom Rini
- [PATCH] CI: Add automatic retry for test.py jobs
Tom Rini
- [PATCH v5 0/6] add loongson mips ls1c300 initial support
Tom Rini
- [PATCH v5 2/6] mips: ls1c300: add base support
Tom Rini
- [PATCH 1/2] net: ipv6: router advertisement message length should be within limits
Tom Rini
- [PATCH 2/2] net: ipv6: network protocol structures should be packed
Tom Rini
- [PATCH] net: ksz9477: add support for KSZ9893 GbE switch
Tom Rini
- [PATCH] phy: adin: add readext and writeext support for mdio cmd
Tom Rini
- [PATCH v17 09/10] arm_ffa: efi: introduce FF-A MM communication
Tom Rini
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Tom Rini
- [PATCH 2/5] configs: am64x_evm_a53_defconfig: remove SYS_SPI_U_BOOT_OFFS
Tom Rini
- [PATCH v5 3/6] mips: add a ls1c300 based board
Tom Rini
- Pull request: u-boot-rockchip-20230728
Tom Rini
- [PATCH v2 1/4] net: ti: am65-cpsw-nuss: Use approved property to get efuse address
Tom Rini
- [PATCH v2 2/4] net: ti: am65-cpsw-nuss: Get port mode register from standard "phys" property
Tom Rini
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Tom Rini
- [PATCH 1/5] configs: am62x: add SPL_MAX_SIZE back
Tom Rini
- [PATCH 3/5] env: ti: mmc.env: Move mmc related args to common place
Tom Rini
- [PATCH 4/5] env: ti: mmc.env: Fix overlays directory path
Tom Rini
- [PATCH 5/5] mach-k3: security: improve the checks around authentication
Tom Rini
- [PATCH v2 1/2] configs: keystone2: Unwind KERNEL_MTD_PARTS definition
Tom Rini
- [PATCH v2 2/2] configs: keystone2: Change to using env files
Tom Rini
- [PATCH v1] arm: k3: fix fdt_del_node_path implicit declaration and a missing include
Tom Rini
- [PATCH 1/5] boards: siemens: iot2050: Fix boot configuration
Tom Rini
- [PATCH 2/5] iot2050: Use binman in signing script
Tom Rini
- [PATCH 3/5] boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
Tom Rini
- [PATCH 4/5] doc: board: siemens: iot2050: Update build env vars
Tom Rini
- [PATCH 5/5] configs: iot2050: Enabled keyed autoboot
Tom Rini
- [PATCH V3 1/3] omap: timer: add ti,am654-timer compatibility
Tom Rini
- [PATCH V3 2/3] arm: mach-k3: am62: Add timer0 id to the dev list
Tom Rini
- [PATCH V3 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Tom Rini
- Pull request for efi-2023-10-rc2
Tom Rini
- [PATCHv4 1/5] net/lwip: add lwip-external submodule
Tom Rini
- [PATCH 3/6] net: ti: am65-cpsw-nuss: Add logic to support MDIO reset
Tom Rini
- [PATCH v8 0/7] Tegra: add ASUS/Google Nexus 7 (2012) support
Tom Rini
- Pull request for spl-2023-10-rc2
Tom Rini
- Pull request: u-boot-rockchip-20230731
Tom Rini
- [PATCH] arm: moxa: add nport6600 platform
Tom Rini
- [PATCH] spl: spl_legacy: Fix spl_end address for non ARM target
Tom Rini
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Tom Rini
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Tom Rini
- [PATCH v3 5/9] board_f: Fix corruption of relocaddr
Tom Rini
- [PATCH] arm: Use builtins for ffs/fls
Tom Rini
- [RFC PATCH 0/4] arm: dts: Sync k3-am62 with upstream
Maxime Ripard
- [PATCH v7 00/23] Migration to using binman for bootloader
Maxime Ripard
- [PATCH v7 00/23] Migration to using binman for bootloader
Maxime Ripard
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [RFC PATCH 4/4] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH 1/4] pinctrl: Create a select_state variant with the ofnode
Maxime Ripard
- [PATCH 2/4] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH 3/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 4/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH 4/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 4/4] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 2/4] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH 0/2] net: ti: am65-cpsw-nuss: Drop custom property "mac_efuse"
Maxime Ripard
- [PATCH v2 0/3] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH v2 1/3] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v2 2/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH v2 3/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH v2 3/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH v2 0/4] net: ti: am65-cpsw-nuss: Drop custom properties
Maxime Ripard
- [PATCH v2 1/3] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v3 0/3] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH v3 1/3] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v3 2/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH v3 3/3] fixup! net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v3 3/3] fixup! net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v4 0/2] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Maxime Ripard
- [PATCH v4 2/2] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- [PATCH 0/4] net: ti: am65-cpsw-nuss: Fix DT binding handling of pinctrl
Maxime Ripard
- [PATCH V3 0/3] arm: dts: Sync k3-am62 with upstream kernel
Maxime Ripard
- [PATCH V3 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1
Maxime Ripard
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Peter Robinson
- How u-boot can chain "grub" and booting a mainline kernel on my ARM Chromebook
Peter Robinson
- [RFC] rockchip: rk3308: fix "same-as-spl" bug in boot devices order
Peter Robinson
- Uboot uefi problem
Peter Robinson
- [PATCH] configs: rock64-rk3328_defconfig: Enable ROCKCHIP_EFUSE
Peter Robinson
- [PATCHv4 1/5] net/lwip: add lwip-external submodule
Peter Robinson
- [PATCH] lzma: Fix decompression speed regression
Stefan Roese
- [PATCH] lzma: Fix decompression speed regression
Stefan Roese
- [PATCH u-boot 0/3] Revert broken Bootmenu commits
Stefan Roese
- [PATCH v2 1/6] arm: mvebu: ac5: Add nand-controller node
Stefan Roese
- [PATCH v2 2/6] arm: mvebu: ac5: Define mvebu_get_nand_clock()
Stefan Roese
- [PATCH v2 3/6] mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
Stefan Roese
- [PATCH v2 4/6] mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K
Stefan Roese
- [PATCH v2 5/6] arm: mvebu: Add Allied Telesis x240 board
Stefan Roese
- [PATCH v2 6/6] arm: mvebu: Remove unused alias from RC AC5X dts
Stefan Roese
- [PATCH] arm: mvebu: Clean up Thecus N2350 board DTS
Stefan Roese
- [PATCH] arm: mvebu: Enable gpio-fan for Thecus N2350 board
Stefan Roese
- [PATCH v2 0/6] Support for AC5X NAND and AT-x240 board
Stefan Roese
- Please pull u-boot-marvell/master
Stefan Roese
- [PATCH] cyclic: Add ratelimiting schedule() via CYCLIC_RATELIMIT_US
Stefan Roese
- [PATCH u-boot 0/3] Revert broken Bootmenu commits
Stefan Roese
- [PATCH] cyclic: Add ratelimiting schedule() via CYCLIC_RATELIMIT_US
Stefan Roese
- [PATCH 1/5] drivers: watchdog: add mcf watchdog support
Stefan Roese
- [PATCH 2/5] m68k: move watchdog functions in mcf_wdt driver
Stefan Roese
- [PATCH 3/5] m68k: dts: add watchdog node
Stefan Roese
- [PATCH 3/5] m68k: dts: add watchdog node
Stefan Roese
- [PATCH 05/29] serial: mtk: initial priv data before using
Stefan Roese
- [PATCH 1/5] drivers: watchdog: add mcf watchdog support
Stefan Roese
- [PATCH v2 1/5] drivers: watchdog: add mcf watchdog support
Stefan Roese
- [PATCH] arm: mvebu: x240: Use i2c-gpio instead of built in controller
Stefan Roese
- [PATCH v4 5/6] mips: ls1c300: add watchdog support
Stefan Roese
- [PATCH v2] cyclic: Add rate limiting in schedule() via CYCLIC_RATELIMIT_US
Stefan Roese
- [PATCH v3 1/5] drivers: watchdog: add mcf watchdog support
Stefan Roese
- [PATCH v3 2/5] m68k: move watchdog functions in mcf_wdt driver
Stefan Roese
- [PATCH v3 3/5] m68k: dts: add watchdog node
Stefan Roese
- [PATCH v3 4/5] configs: m68k: add watchdog driver
Stefan Roese
- [PATCH v3 5/5] MAINTAINERS: add myself as mcf_wdt.c maintainer
Stefan Roese
- [PATCH 1/1] spl: initialize PCI before booting from MMC
Stefan Roese
- [PATCH v5 5/6] mips: ls1c300: add watchdog support
Stefan Roese
- [PATCH] watchdog: ftwdt010: need to reset watchdog in ftwdt010_wdt_start()
Stefan Roese
- [PATCH u-boot 0/4] mmc: Explain and cleanup partition selection
Pali Rohár
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH u-boot 0/4] mmc: Explain and cleanup partition selection
Pali Rohár
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v2 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v3 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v3 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH v3 u-boot] mmc: spl: Make partition choice in default_spl_mmc_emmc_boot_partition() more explicit
Pali Rohár
- [PATCH 2/6] nokia_rx51: Correct tstc() implementation
Pali Rohár
- [PATCH 0/6] nokia_nx51: Attempts to debug keyboard
Pali Rohár
- [PATCH 0/6] nokia_nx51: Attempts to debug keyboard
Pali Rohár
- [PATCH u-boot 0/3] Revert broken Bootmenu commits
Pali Rohár
- [PATCH v2] powerpc: Add support for CZ.NIC Turris 1.x routers
Pali Rohár
- [PATCH v5 0/6] add loongson mips ls1c300 initial support
Pali Rohár
- [PATCH v1 0/2] Introduce Meson SM driver
Alexey Romanov
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Alexey Romanov
- [PATCH v1 2/2] asm/arch: mach-meson: use secure monitor driver
Alexey Romanov
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Alexey Romanov
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Alexey Romanov
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
Alexey Romanov
- [RFC PATCH] riscv: sifive: fu70: downclock CPU clock for stability
Maciej W. Rozycki
- [RFC PATCH] riscv: sifive: fu70: downclock CPU clock for stability
Maciej W. Rozycki
- Trying to boot JH7110 RISCV-V CPU from MMC
Roland Ruckerbauer
- [PATCH v1 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v1 1/2] power: pmic: support TI TPS65913 PMIC
Svyatoslav Ryhel
- [PATCH v1 2/2] power: regulator: palmas: set up voltage on probe
Svyatoslav Ryhel
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v1 1/6] power: pmic: add the base max77663 pmic support
Svyatoslav Ryhel
- [PATCH v1 2/6] power: regulator: max77663: add regulator support
Svyatoslav Ryhel
- [PATCH v1 3/6] power: pmic: add the base TPS80031 PMIC support
Svyatoslav Ryhel
- [PATCH v1 4/6] power: regulator: tps80031: add regulator support
Svyatoslav Ryhel
- [PATCH v1 5/6] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH v1 6/6] power: regulator: tps65911: add regulator support
Svyatoslav Ryhel
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 1/2] power: pmic: support TI TPS65913 PMIC
Svyatoslav Ryhel
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 2/2] power: pmic: fix regulators behaviour
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v2 0/2] power: pmic: add TPS65913 support
Svyatoslav Ryhel
- [PATCH v1 0/4] General regulator and pmic uclass improvements
Svyatoslav Ryhel
- [PATCH v1 1/4] power: regulator: expand basic reference counter onto all uclass
Svyatoslav Ryhel
- [PATCH v1 2/4] power: regulator-uclass: perform regulator setup inside uclass
Svyatoslav Ryhel
- [PATCH v1 3/4] power: pmic-uclass: probe every child on pmic_post_probe
Svyatoslav Ryhel
- [PATCH v1 4/4] power: regulator-uclass: remove all deprecated API use
Svyatoslav Ryhel
- [PATCH v1 1/4] power: regulator: expand basic reference counter onto all uclass
Svyatoslav Ryhel
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v1 0/6] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v2 0/9] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v2 1/9] power: pmic-uclass: implement poweroff ops
Svyatoslav Ryhel
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Svyatoslav Ryhel
- [PATCH v2 3/9] power: pmic: palmas: support TI TPS65913 PMIC
Svyatoslav Ryhel
- [PATCH v2 4/9] power: pmic: add the base MAX77663 PMIC support
Svyatoslav Ryhel
- [PATCH v2 5/9] power: regulator: max77663: add regulator support
Svyatoslav Ryhel
- [PATCH v2 6/9] power: pmic: add the base TPS80031 PMIC support
Svyatoslav Ryhel
- [PATCH v2 7/9] power: regulator: tps80031: add regulator support
Svyatoslav Ryhel
- [PATCH v2 8/9] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH v2 9/9] power: regulator: tps65911: add regulator support
Svyatoslav Ryhel
- [PATCH v2 0/7] General regulator and pmic uclass improvements
Svyatoslav Ryhel
- [PATCH v2 1/7] power: regulator: expand basic reference counter onto all uclass
Svyatoslav Ryhel
- [PATCH v2 2/7] test: dm: regulator: test counter in set_enable_if_allowed test
Svyatoslav Ryhel
- [PATCH v2 3/7] power: regulator-uclass: perform regulator setup inside uclass
Svyatoslav Ryhel
- [PATCH v2 4/7] test: dm: regulator: provide test of auto setup
Svyatoslav Ryhel
- [PATCH v2 5/7] power: pmic-uclass: probe every child on pmic_post_probe
Svyatoslav Ryhel
- [PATCH v2 6/7] test: dm: pmic: provide test of child autosetup
Svyatoslav Ryhel
- [PATCH v2 7/7] power: regulator-uclass: remove all deprecated API use
Svyatoslav Ryhel
- [PATCH v2 8/9] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH v2 1/7] power: regulator: expand basic reference counter onto all uclass
Svyatoslav Ryhel
- [PATCH v2 3/7] power: regulator-uclass: perform regulator setup inside uclass
Svyatoslav Ryhel
- [PATCH v2 1/9] power: pmic-uclass: implement poweroff ops
Svyatoslav Ryhel
- [PATCH v2 5/7] power: pmic-uclass: probe every child on pmic_post_probe
Svyatoslav Ryhel
- [PATCH v2 8/9] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH 0/5] Keep fixed/gpio regulator enable count in balance
Svyatoslav Ryhel
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Svyatoslav Ryhel
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Svyatoslav Ryhel
- [PATCH v3 0/7] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v3 1/7] power: pmic: palmas: support TI TPS65913 PMIC
Svyatoslav Ryhel
- [PATCH v3 2/7] power: pmic: add the base MAX77663 PMIC support
Svyatoslav Ryhel
- [PATCH v3 3/7] power: regulator: max77663: add regulator support
Svyatoslav Ryhel
- [PATCH v3 4/7] power: pmic: add the base TPS80031 PMIC support
Svyatoslav Ryhel
- [PATCH v3 5/7] power: regulator: tps80031: add regulator support
Svyatoslav Ryhel
- [PATCH v3 6/7] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH v3 7/7] power: regulator: tps65911: add regulator support
Svyatoslav Ryhel
- [PATCH v4 0/7] Add support for PMICs used on Tegra 3 devices
Svyatoslav Ryhel
- [PATCH v4 1/7] power: pmic: palmas: support TI TPS65913 PMIC
Svyatoslav Ryhel
- [PATCH v4 2/7] power: pmic: add the base MAX77663 PMIC support
Svyatoslav Ryhel
- [PATCH v4 3/7] power: regulator: max77663: add regulator support
Svyatoslav Ryhel
- [PATCH v4 4/7] power: pmic: add the base TPS80031 PMIC support
Svyatoslav Ryhel
- [PATCH v4 5/7] power: regulator: tps80031: add regulator support
Svyatoslav Ryhel
- [PATCH v4 6/7] power: pmic: tps65910: add TPS65911 PMIC support
Svyatoslav Ryhel
- [PATCH v4 7/7] power: regulator: tps65911: add regulator support
Svyatoslav Ryhel
- [PATCH 4/5] mmc: Use regulator_set_enable_if_allowed
Svyatoslav Ryhel
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Svyatoslav Ryhel
- [PATCH v8 0/7] Tegra: add ASUS/Google Nexus 7 (2012) support
Svyatoslav Ryhel
- [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff
Svyatoslav Ryhel
- [PATCH 01/10] Makefile: Add support to generate GZIP compressed raw u-boot binary
Manoj Sai
- [PATCH 02/10] spl: Kconfig: Address support for compressed U-BOOT raw binary
Manoj Sai
- [PATCH v2 0/4] support for booting the compressed U-boot binary on Rockchip based ARM64 SOC's
Manoj Sai
- [PATCH v2 1/4] rockchip: Add support to generate GZIP compressed U-boot binary
Manoj Sai
- [PATCH v2 2/4] rockchip: Add support to generate LZMA compressed U-boot binary
Manoj Sai
- [PATCH v2 3/4] spl: fit: support for booting a GZIP-compressed U-boot binary
Manoj Sai
- [PATCH v2 4/4] spl: fit: support for booting a LZMA-compressed U-boot binary
Manoj Sai
- [u-boot][PATCH] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Mihai Sain
- [PATCH v2] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Mihai Sain
- imx8mp: issues getting dtb with pcie enabled to boot
Sahaj Sarup
- imx8mp: issues getting dtb with pcie enabled to boot
Sahaj Sarup
- imx8mp: issues getting dtb with pcie enabled to boot
Sahaj Sarup
- [PATCH 1/2] Revert "lib: string: Fix strlcpy return value", fix callers
Matthias Schiffer
- [PATCH 2/2] lib/charset: fix u16_strlcat() return value
Matthias Schiffer
- [PATCH v2] ARM: imx: romapi: Fix signed integer bitwise ops misuse
Heiko Schocher
- [PATCH 1/2] ARM: armv7: Add C wrapper for allow_unaligned()
Heinrich Schuchardt
- Pull request efi-2023-07-rc6
Heinrich Schuchardt
- [PATCH] efi_driver: fix duplicate efiblk#0 issue
Heinrich Schuchardt
- [PATCH v2] efi_driver: fix duplicate efiblk#0 issue
Heinrich Schuchardt
- [PATCH v2] efi_driver: fix duplicate efiblk#0 issue
Heinrich Schuchardt
- [PATCH 1/1] RISC-V: CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS description
Heinrich Schuchardt
- [PATCH 1/1] tools: spkgimage: correct printf specifier
Heinrich Schuchardt
- EFI Secure boot default keys
Heinrich Schuchardt
- EFI Secure boot default keys
Heinrich Schuchardt
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Heinrich Schuchardt
- [PATCH] efi_loader: Increase default variable store size to 32K
Heinrich Schuchardt
- [PATCH] cmd: efidebug: add missing efi_free_pool for dh subcommand
Heinrich Schuchardt
- [PATCH] x86: Update docs link in bootparam header
Heinrich Schuchardt
- [PATCH 1/1] doc: harmonize Linux kernel documentation links
Heinrich Schuchardt
- [PATCH v1] mkeficapsule: fix efi_firmware_management_capsule_header data type
Heinrich Schuchardt
- [PATCH v10 3/4] Boot var automatic management for removable medias
Heinrich Schuchardt
- [PATCH 1/4 v2] efi_loader: reconnect drivers on failure
Heinrich Schuchardt
- [PATCH 2/4 v2] efi_loader: check the status of disconnected drivers
Heinrich Schuchardt
- [PATCH] efi_loader: make efi_delete_handle() follow the EFI spec
Heinrich Schuchardt
- [PATCH v2] x86: Update docs link in bootparam header
Heinrich Schuchardt
- Pull request efi-2023-07-rc7
Heinrich Schuchardt
- Re: [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Heinrich Schuchardt
- Re: [PATCH v3 02/11] capsule: authenticate: Add capsule public key in platform's dtb
Heinrich Schuchardt
- Re: [PATCH v1] mkeficapsule: fix efi_firmware_management_capsule_header data type
Heinrich Schuchardt
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
Heinrich Schuchardt
- [PATCH v4 0/4] SPL NVMe support
Heinrich Schuchardt
- [PATCH 1/1] doc: riscv: running SiFive Unleashed image in QEMU
Heinrich Schuchardt
- [PATCH v2 1/6] efi_loader: add RAM disk device path
Heinrich Schuchardt
- Re: [PATCH] bootstd: Make efi_mgr bootmeth work for non-sandbox setups
Heinrich Schuchardt
- [PATCH] bootstd: Make efi_mgr bootmeth work for non-sandbox setups
Heinrich Schuchardt
- [PATCH] common: define time_t as 64bit
Heinrich Schuchardt
- [PATCH 1/1] test: avoid function name 'setup'
Heinrich Schuchardt
- [PATCH v10 3/4] Boot var automatic management for removable medias
Heinrich Schuchardt
- Pull request efi-2023-10-rc1
Heinrich Schuchardt
- [PATCH 1/1] part: eliminate part_get_info_by_name_type()
Heinrich Schuchardt
- [PATCH 1/1] test: avoid function name 'setup'
Heinrich Schuchardt
- [PATCH v2 1/6] efi_loader: add RAM disk device path
Heinrich Schuchardt
- [PATCH v10 3/4] Boot var automatic management for removable medias
Heinrich Schuchardt
- [PATCH] efi_loader: Allow also empty capsule to be process
Heinrich Schuchardt
- EFI breaks USB dual port detection - our observations
Heinrich Schuchardt
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Heinrich Schuchardt
- [PATCH 1/1] part: eliminate part_get_info_by_name_type()
Heinrich Schuchardt
- EFI breaks USB dual port detection - our observations
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: support all uclasses in device path
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: support all uclasses in device path
Heinrich Schuchardt
- [BUG] efi_loader: incorrect creation of device paths
Heinrich Schuchardt
- [RFC] efi_driver: fix a parent issue in efi-created block devices
Heinrich Schuchardt
- [PATCH v2 2/6] ramdisk: add ramdisk uclass and driver
Heinrich Schuchardt
- [PATCH v2 0/2] efi_loader: support all uclasses in device path
Heinrich Schuchardt
- [PATCH v2 1/2] efi_loader: fix dp_fill() for BLKMAP, HOST, VIRTIO
Heinrich Schuchardt
- [PATCH v2 2/2] efi_loader: support all uclasses in device path
Heinrich Schuchardt
- Pull request efi-2023-10-rc1-2
Heinrich Schuchardt
- data abort when run 'dhcp'
Heinrich Schuchardt
- [PATCH 1/1] doc: update coc/sphinx/requirements.txt
Heinrich Schuchardt
- [PATCH] efi_loader: Allow also empty capsule to be process
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: device paths for special block devices
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: simplify dp_fill()
Heinrich Schuchardt
- [PATCH 1/1] spl: blk: use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
Heinrich Schuchardt
- [PATCH 1/1] riscv: define a cache line size for QEMU
Heinrich Schuchardt
- [PATCH 1/1] spl: boot always fail on CONFIG_SHOW_ERRORS=y
Heinrich Schuchardt
- [PATCH 1/1] part: check CONFIG_IS_ENABLED(ENV_SUPPORT)
Heinrich Schuchardt
- [PATCH v2 1/1] riscv: define a cache line size for the generic CPU
Heinrich Schuchardt
- [PATCH 1/1] spl: blk: partition numbers are hexadecimal
Heinrich Schuchardt
- [PATCH 1/1] riscv: qemu: provide more SPL boot methods
Heinrich Schuchardt
- [PATCH 1/1] spl: spl_legacy: simplify spl_parse_legacy_validate
Heinrich Schuchardt
- [PATCH 1/1] spl: add FIT support to semihosting boot method
Heinrich Schuchardt
- [PATCH 1/1] spl: spl_legacy: simplify spl_parse_legacy_validate
Heinrich Schuchardt
- [PATCH 1/1] spl: initialize PCI before booting from SATA
Heinrich Schuchardt
- [PATCH 1/1] riscv: qemu: provide more SPL boot methods
Heinrich Schuchardt
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Heinrich Schuchardt
- [PATCH 14/18] console: Print out complete stdio device list
Heinrich Schuchardt
- [PATCH 13/18] console: Refactor stdio_print_current_devices() a little bit
Heinrich Schuchardt
- [PATCH 11/18] console: kconfig: Drop the redundant VIDEO dependency
Heinrich Schuchardt
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Heinrich Schuchardt
- [PATCH 14/18] console: Print out complete stdio device list
Heinrich Schuchardt
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Heinrich Schuchardt
- [PATCH 1/1] spl: initialize PCI before booting from USB
Heinrich Schuchardt
- [PATCH 1/1] spl: initialize PCI before booting from SATA
Heinrich Schuchardt
- [PATCH 1/1] doc: fix typo device_compat/.h
Heinrich Schuchardt
- [PATCH 1/1] doc: describe QEMU emulation of block devices
Heinrich Schuchardt
- [PATCH 1/1] spl: initialize PCI before booting from MMC
Heinrich Schuchardt
- [PATCH v2 1/1] spl: initialize PCI before booting from MMC
Heinrich Schuchardt
- [PATCH 1/1] spl: add FIT support to semihosting boot method
Heinrich Schuchardt
- [PATCH] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Heinrich Schuchardt
- [PATCH v2 1/1] spl: initialize PCI before booting from MMC
Heinrich Schuchardt
- [PATCH 18/18] riscv: qemu: Enable usb keyboard as an input device
Heinrich Schuchardt
- [PATCH v2 1/1] spl: CONFIG_SPL_PCI_PNP should depend on CONFIG_SPL_PCI
Heinrich Schuchardt
- [PATCH v2 1/1] spl: initialize PCI before booting
Heinrich Schuchardt
- [PATCH 1/1] acpi: Add missing RISC-V acpi_table header
Heinrich Schuchardt
- [PATCH 1/1] acpi: Add missing RISC-V acpi_table header
Heinrich Schuchardt
- [PATCH v2 1/1] spl: spl_legacy: clean up spl_parse_legacy_validate
Heinrich Schuchardt
- [PATCH 1/1] riscv: sifive: initialize PCI on Unmatched
Heinrich Schuchardt
- [PATCH v2 1/1] spl: initialize PCI before booting
Heinrich Schuchardt
- [PATCH v5 08/12] doc: Add documentation to highlight capsule generation related updates
Heinrich Schuchardt
- [PATCH v2 1/1] acpi: Add missing RISC-V acpi_table header
Heinrich Schuchardt
- [bug report] fs: fat: create correct short names
Heinrich Schuchardt
- [PATCH 1/1] fat: correct sign for deletion mark
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: simplify dp_fill()
Heinrich Schuchardt
- [PATCH 1/1] virtio: provide driver name in debug message
Heinrich Schuchardt
- [PATCH 2/6] arm_ffa: introduce armffa command
Heinrich Schuchardt
- [PATCH v4 1/9] spl: Add generic spl_load function
Heinrich Schuchardt
- [PATCH] efi_loader: fix an IS_ERR() vs NULL check
Heinrich Schuchardt
- [PATCH] efi_loader: fix uninitialized variable bug in efi_set_load_options()
Heinrich Schuchardt
- [PATCH] test: unicode: fix a sizeof() vs ARRAY_SIZE() bug
Heinrich Schuchardt
- bugs with EFI "reserved" memory and LMB?
Heinrich Schuchardt
- [PATCH v4.1 10/9] spl: Convert NVMe to spl_load
Heinrich Schuchardt
- [PATCH 1/1] pci: correct function name in message
Heinrich Schuchardt
- [PATCH v2] efi_loader: Fix memory corruption on 32bit systems
Heinrich Schuchardt
- [PATCH v2 1/1] doc: update doc/sphinx/requirements.txt
Heinrich Schuchardt
- [PATCH] docs: boards: ti: add openocd spl debugging docs
Heinrich Schuchardt
- [PATCH v2] efi_loader: make efi_delete_handle() follow the EFI spec
Heinrich Schuchardt
- [PATCH 02/16] doc: board: ti: am62x/j7200: Update with common boot flow diagram
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: device paths for special block devices
Heinrich Schuchardt
- [PATCH 1/1] riscv: qemu: imply CONFIG_DM_RNG
Heinrich Schuchardt
- [PATCH 1/1] doc: U-Boot boot phases
Heinrich Schuchardt
- [PATCH v2 1/1] doc: U-Boot boot phases
Heinrich Schuchardt
- Pull request for efi-2023-10-rc2
Heinrich Schuchardt
- [PATCH v2 1/1] doc: U-Boot boot phases
Heinrich Schuchardt
- [PATCH 1/1] doc: move README.falcon to HTML
Heinrich Schuchardt
- [PATCH] doc: board: ti: Add SPDX License to svg images
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: fix invocation of efi_prepare_aligned_image
Heinrich Schuchardt
- [PATCH 1/1] tools/fdt_add_pubkey: error handling in add_pubkey
Heinrich Schuchardt
- [PATCH 1/1] efi_selftest: remove superfluous assignments
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: error handling in tcg2_hash_pe_image()
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: overflow in efi_allocate_pages
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: out of memory in efi_mem_carve_out
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: out of memory in efi_add_memory_map_pg
Heinrich Schuchardt
- [PATCH v2 1/1] efi_loader: overflow in efi_allocate_pages
Heinrich Schuchardt
- [PATCH v2 1/1] efi_loader: out of memory in efi_mem_carve_out
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: memory leak efi_add_memory_map_pg
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: error handling in efi_disk_add_dev
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: catch out of memory in file_open
Heinrich Schuchardt
- [PATCH 1/1] cmd: avoid overflow in mtd_is_aligned_with_min_io_size
Heinrich Schuchardt
- [PATCH 1/1] boot: fix bootdev_list()
Heinrich Schuchardt
- [PATCH 1/1] fs: fat: avoid multiplication overflow
Heinrich Schuchardt
- [PATCH 1/1] cmd/bootdev: print readable status code
Heinrich Schuchardt
- [PATCH 1/1] doc: describe QEMU virtio block device
Heinrich Schuchardt
- [PATCH v2 1/1] doc: describe QEMU virtio block device
Heinrich Schuchardt
- Pull request for spl-2023-10-rc2
Heinrich Schuchardt
- [PATCH 1/1] riscv: qemu: imply CONFIG_DM_RNG
Heinrich Schuchardt
- [U-BOOT TEST HOOKS][PATCH 1/1] qemu-riscv: enable virtio-rng-pci
Heinrich Schuchardt
- [PATCH 1/1] cmd: avoid overflow in mtd_is_aligned_with_min_io_size
Heinrich Schuchardt
- [U-BOOT TEST HOOKS][PATCH 1/1] qemu-riscv: enable virtio-rng-pci
Heinrich Schuchardt
- [U-BOOT-TEST-HOOKS][PATCH v2 1/1] qemu-riscv: enable virtio-rng-device
Heinrich Schuchardt
- [PATCH v2 1/1] efi_loader: error handling in tcg2_hash_pe_image()
Heinrich Schuchardt
- [PATCH v2 1/1] efi_loader: overflow in efi_allocate_pages
Heinrich Schuchardt
- [PATCH] cmd: improve string matching for hex
Heinrich Schuchardt
- [PATCH 0/2] test: unit test for semihosting
Heinrich Schuchardt
- [PATCH 1/2] configs: enable SEMIHOSTING on qemu_arm64_defconfig
Heinrich Schuchardt
- [PATCH 2/2] test: unit test for semihosting
Heinrich Schuchardt
- [RFC PATCH 00/10] Add RPMsg framework
Tanmay Shah
- [RFC PATCH 01/10] remoteproc: move resource table definition
Tanmay Shah
- [RFC PATCH 02/10] firmware: zynqmp: move zynqmp_pm_request_node API
Tanmay Shah
- [RFC PATCH 03/10] remoteproc: add remoteproc virtio transport driver
Tanmay Shah
- [RFC PATCH 04/10] drivers: add RPMsg framework
Tanmay Shah
- [RFC PATCH 05/10] rpmsg: add sample client driver
Tanmay Shah
- [RFC PATCH 06/10] cmd: add rpmsg framework commands
Tanmay Shah
- [RFC PATCH 07/10] remoteproc: add attach/detach commands
Tanmay Shah
- [RFC PATCH 08/10] remoteproc: add zynqmp driver
Tanmay Shah
- [RFC PATCH 09/10] configs: zynqmp: enable remoteproc and rpmsg
Tanmay Shah
- [RFC PATCH 10/10] configs: sandbox: enable rpmsg
Tanmay Shah
- [PATCH] phy: phy-uclass: Add a missing error handling path
Bhupesh Sharma
- [PATCH] ufs: Use 'TASK_TAG' to construct the ucd_req_ptr->header.dword_0
Bhupesh Sharma
- [PATCH] phy: phy-uclass: Add a missing error handling path
Bhupesh Sharma
- [PATCH 00/22] x86: Move some boards to text environment
Andy Shevchenko
- [PATCH] mtd: Add missing MTD dependency for cfi_mtd
Michal Simek
- [PATCH] sysreset: Change Kconfig GPIO dependency
Michal Simek
- [PATCH] zynqmp: config: Add proper dependency for CONFIG_DFU_MMC
Michal Simek
- [PATCH] xilinx: Consolidate zynqmp_mmio_read/write in zynqmp_firmware.h
Michal Simek
- [PATCH] spl: Add function called after fpga image upload
Michal Simek
- [PATCH] xilinx: zynqmp: Extract aes operation into new file
Michal Simek
- [PATCH] xilinx: zynq: Enable fdt apply utility for zynq
Michal Simek
- [PATCH] mmc: zynq_sdhci: Dll reset only for ZynqMP platform
Michal Simek
- [PATCH] arm64: zynqmp: Switch to amd.com emails
Michal Simek
- [PATCH 00/17] Hi,
Michal Simek
- [PATCH 01/17] arm: xilinx: Setting default i2c clock frequency to 400kHz
Michal Simek
- [PATCH 02/17] xilinx: dts: Fix open drain warning on Zynq, ZynqMP and Versal
Michal Simek
- [PATCH 03/17] arm64: zynqmp: Update MALI 400 interrupt and clock names
Michal Simek
- [PATCH 04/17] arm64: zynqmp: Assign TSU clock frequency for KR260
Michal Simek
- [PATCH 05/17] arm64: zynqmp: Fix gpio comment about No of gpios
Michal Simek
- [PATCH 06/17] arm64: zynqmp: Increase reset assert time for TI SGMII PHY
Michal Simek
- [PATCH 07/17] arm64: zynqmp: Assign TSU clock frequency for KV and KD boards
Michal Simek
- [PATCH 08/17] arm64: zynqmp: Record compatible string for kv260 rev2
Michal Simek
- [PATCH 09/17] arm64: zynqmp: Cover K24 revB/1 SOM
Michal Simek
- [PATCH 10/17] arm64: zynqmp: Fix usb reset over bootmode pins on zcu100
Michal Simek
- [PATCH 11/17] arm64: zynqmp: Add L2 cache nodes
Michal Simek
- [PATCH 12/17] arm64: zynqmp: Sync node name address with reg (mailbox)
Michal Simek
- [PATCH 13/17] arm64: zynqmp: add pmu interrupt-affinity
Michal Simek
- [PATCH 14/17] arm64: zynqmp: remove snps, enable_guctl1_resume_quirk quirk for usb
Michal Simek
- [PATCH 15/17] arm64: zynqmp: Remove interrupt/reg-names for AMS
Michal Simek
- [PATCH 16/17] arm64: zynqmp: Rename ams_ps/pl node names
Michal Simek
- [PATCH 17/17] arm64: zynqmp: Remove clock-names from pcap node
Michal Simek
- [PATCH] mmc: zynq_sdhci: Dll reset only for ZynqMP platform
Michal Simek
- [PATCH] spl: Add function called after fpga image upload
Michal Simek
- [ANN] U-Boot v2023.07 released
Michal Simek
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Michal Simek
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Michal Simek
- [PATCH v2] xilinx: board: Add support to pick bootscr address from DT
Michal Simek
- [PATCH] fwu: Allow code to properly decode trial state
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH] fwu: mtd: Fix dfu_alt_info generation for 2 images per bank
Michal Simek
- [PATCH v2] xilinx: board: Add support to pick bootscr address from DT
Michal Simek
- [PATCH] fwu: Show number of attempts in Trial State
Michal Simek
- [PATCH v2 5/8] tools: mkeficapsule: Add support for parsing capsule params from config file
Michal Simek
- [PATCH v2 5/8] tools: mkeficapsule: Add support for parsing capsule params from config file
Michal Simek
- [PATCH] .mailmap: Correct entires for Masahiro Yamada
Michal Simek
- [PATCH] xilinx: zynq: Enable fdt apply utility for zynq
Michal Simek
- [PATCH] arm64: zynqmp: Switch to amd.com emails
Michal Simek
- [PATCH v2] xilinx: zynqmp: Extract aes operation into new file
Michal Simek
- [PATCH] mtd: spi-nor: Add support for w25q256jwm
Michal Simek
- [PATCH] mmc: zynq_sdhci: Dll reset only for ZynqMP platform
Michal Simek
- [PATCH] mtd: Add missing MTD dependency for cfi_mtd
Michal Simek
- [PATCH 00/17] arm64: zynqmp: Sync DTs was [Hi,]
Michal Simek
- [PATCH v3] event: Add fpga load event
Michal Simek
- [PATCH] env: Fix default environment saving issue
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH v3] event: Add fpga load event
Michal Simek
- [PATCH] net: axi_emac: Change return value to -EAGAIN if RX is not ready
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Michal Simek
- [PATCH] clk: zynqmp: Add set_rate support for gem rx and tsu clks
Michal Simek
- [PATCH] clk: zynqmp: Add gem rx and tsu clocks to return register
Michal Simek
- [GIT PULL] xilinx patches for v2023.10-rc1 v2
Michal Simek
- [PATCH v3 09/11] binman: btool: Add Xilinx Bootgen btool
Michal Simek
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
Michal Simek
- [PATCH v5] event: Add fpga load event
Michal Simek
- [PATCH v3] xilinx: zynqmp: Extract aes operation into new file
Michal Simek
- [PATCH] efi_loader: Allow also empty capsule to be process
Michal Simek
- [PATCH v4] xilinx: zynqmp: Extract aes operation into new file
Michal Simek
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
Michal Simek
- [PATCH v3 1/2] dm: core: ofnode: Add ofnode_read_bootscript_address()
Michal Simek
- [PATCH v3 2/2] xilinx: board: Add support to pick bootscr address from DT
Michal Simek
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
Michal Simek
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
Michal Simek
- [PATCH] tools: relocate-rela: Fix BE symtab handling
Michal Simek
- [PATCH 1/2] tools: relocate-rela: Add M68K support
Michal Simek
- [PATCH] sunxi: restore modified memory
Andrey Skvortsov
- [PATCH] env: Fix default environment saving issue
Ashok Reddy Soma
- [PATCH] zynqmp: config: Add proper dependency for CONFIG_DFU_MMC
Ashok Reddy Soma
- [PATCH v2] dfu: Add proper dependency for CONFIG_DFU_MMC
Ashok Reddy Soma
- [PATCH 0/2] Fix dependencies of USB Kconfig options
Ashok Reddy Soma
- [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Ashok Reddy Soma
- [PATCH 2/2] zynqmp: config: Add proper dependencies for USB
Ashok Reddy Soma
- [PATCH 1/2] cmd: thordown: Add proper dependency for CMD_THOR_DOWNLOAD
Soma, Ashok Reddy
- [PATCH] clk: Dont return error when assigned-clocks is empty or missing
Ashok Reddy Soma
- [PATCH] clk: zynqmp: Add set_rate support for gem rx and tsu clks
Ashok Reddy Soma
- [PATCH] clk: zynqmp: Add gem rx and tsu clocks to return register
Ashok Reddy Soma
- [PATCH] Makefile: Use sort shortopts
Milan P. Stanić
- [PATCH] pci: Fix device_find_first_child() return value handling
Michal Suchánek
- [PATCH] pci: Fix device_find_first_child() return value handling
Michal Suchánek
- [PATCH 1/1] dm: adc: imx93-adc depends on ADC (fix boot)
Sébastien Szymanski
- [PATCH 0/4] clk: imx: add i.MX93 CCF driver
Sébastien Szymanski
- [PATCH 1/4] clk: imx: add i.MX93 CCF driver
Sébastien Szymanski
- [PATCH 2/4] arm: dts: imx93: add a per clock for LPUART1
Sébastien Szymanski
- [PATCH 3/4] serial: lpuart: Enable IPG clock
Sébastien Szymanski
- [PATCH 4/4] imx93_evk: defconfig: enable clock driver
Sébastien Szymanski
- [PATCH 0/4] imx93: add DWC EQoS MAC driver support
Sébastien Szymanski
- [PATCH 1/4] net: dwc_eth_qos: add i.MX93 support
Sébastien Szymanski
- [PATCH 2/4] net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93
Sébastien Szymanski
- [PATCH 3/4] net: phy: realtek: Add support for RTL8211F(D)(I)-VD-CG
Sébastien Szymanski
- [PATCH 4/4] arm: dts: imx93-evk: remove wrong eqos compatible string
Sébastien Szymanski
- [PATCH] board: stm32mp1: add splash screen on dk2
Grzegorz Szymaszek
- [PATCH] board: stm32mp1: add splash screen on dk2
Grzegorz Szymaszek
- [PATCH v2] board: stm32mp1: add splash screen on dk2
Grzegorz Szymaszek
- [PATCH 1/3] binman: Add support for externally encrypted blobs
Taedcke, Christian
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Taedcke, Christian
- [PATCH] spl: Add function called after fpga image upload
Taedcke, Christian
- [PATCH] spl: Add function called after fpga image upload
Taedcke, Christian
- [PATCH] spl: Add function called after fpga image upload
Taedcke, Christian
- [PATCH] spl: Add function called after fpga image upload
Taedcke, Christian
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Taedcke, Christian
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
Taedcke, Christian
- [PATCH v3] event: Add fpga load event
Taedcke, Christian
- distro_boot vs. env-based bootmenu
AKASHI Takahiro
- [PATCH 01/10] firmware: scmi: implement SCMI base protocol
AKASHI Takahiro
- [PATCH 08/10] cmd: add scmi command for SCMI firmware
AKASHI Takahiro
- [PATCH 07/10] test: dm: add SCMI base protocol test
AKASHI Takahiro
- [PATCH 09/10] doc: cmd: add documentation for scmi
AKASHI Takahiro
- [PATCH] efi_driver: fix duplicate efiblk#0 issue
AKASHI Takahiro
- [PATCH 08/10] cmd: add scmi command for SCMI firmware
AKASHI Takahiro
- [PATCH 09/10] doc: cmd: add documentation for scmi
AKASHI Takahiro
- [PATCH 07/10] test: dm: add SCMI base protocol test
AKASHI Takahiro
- EFI Secure boot default keys
AKASHI Takahiro
- EFI Secure boot default keys
AKASHI Takahiro
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
AKASHI Takahiro
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
AKASHI Takahiro
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
AKASHI Takahiro
- [PATCH 08/10] cmd: add scmi command for SCMI firmware
AKASHI Takahiro
- [PATCH 07/10] test: dm: add SCMI base protocol test
AKASHI Takahiro
- [PATCH 0/4] introduce EFI_RAM_DISK_PROTOCOL
AKASHI Takahiro
- [PATCH v1] mkeficapsule: fix efi_firmware_management_capsule_header data type
AKASHI Takahiro
- [PATCH 07/10] test: dm: add SCMI base protocol test
AKASHI Takahiro
- [PATCH 07/10] test: dm: add SCMI base protocol test
AKASHI Takahiro
- Reminder, Re: [PATCH] clk: scmi: claim the dependency on CONFIG_CLK
AKASHI Takahiro
- [PATCH] firmware: scmi: return a right errno for SCMI status code
AKASHI Takahiro
- [PATCH v1 1/2] drivers: firmware: introduce Meson Secure Monitor driver
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [PATCH 1/1] efi_loader: support all uclasses in device path
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [PATCH] efi_loader: Allow also empty capsule to be process
AKASHI Takahiro
- [PATCH] efi_loader: Allow also empty capsule to be process
AKASHI Takahiro
- [PATCH v2 00/12] firmware: scmi: add SCMI base protocol support
AKASHI Takahiro
- [PATCH v2 01/12] scmi: refactor the code to hide a channel from devices
AKASHI Takahiro
- [PATCH v2 02/12] firmware: scmi: implement SCMI base protocol
AKASHI Takahiro
- [PATCH v2 03/12] firmware: scmi: move scmi_bind_protocols() backward
AKASHI Takahiro
- [PATCH v2 04/12] firmware: scmi: framework for installing additional protocols
AKASHI Takahiro
- [PATCH v2 05/12] firmware: scmi: install base protocol to SCMI agent
AKASHI Takahiro
- [PATCH v2 06/12] sandbox: remove SCMI base node definition from test.dts
AKASHI Takahiro
- [PATCH v2 07/12] firmware: scmi: fake base protocol commands on sandbox
AKASHI Takahiro
- [PATCH v2 08/12] test: dm: simplify SCMI unit test on sandbox
AKASHI Takahiro
- [PATCH v2 09/12] test: dm: add SCMI base protocol test
AKASHI Takahiro
- [PATCH v2 10/12] cmd: add scmi command for SCMI firmware
AKASHI Takahiro
- [PATCH v2 11/12] doc: cmd: add documentation for scmi
AKASHI Takahiro
- [PATCH v2 12/12] test: dm: add scmi command test
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [RFC] efi_driver: fix a parent issue in efi-created block devices
AKASHI Takahiro
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
AKASHI Takahiro
- [PATCH] efi_loader: Allow also empty capsule to be process
AKASHI Takahiro
- [PATCH v2 05/12] firmware: scmi: install base protocol to SCMI agent
AKASHI Takahiro
- [RFC 0/3] firmware: scmi: add sanity checks for protocols
AKASHI Takahiro
- [RFC 1/3] firmware: scmi: add a check against availability of protocols
AKASHI Takahiro
- [RFC 2/3] firmware: scmi: add PROTOCOL_VERSION support for existing protocols on sandbox
AKASHI Takahiro
- [RFC 3/3] firmware: scmi: add a sanity check against protocol version
AKASHI Takahiro
- [PATCH] efi_loader: capsule: enforce guid check in api and capsule_on_disk
AKASHI Takahiro
- [WIP] AXP313A(for Mango Pi MQ-Quad) support
SASANO Takayoshi
- [PATCH] add axp313a support
SASANO Takayoshi
- [PATCH] add axp313a support
SASANO Takayoshi
- [PATCH] power: add axp313a support (tag added to subject)
SASANO Takayoshi
- [RFC] rockchip: spl: Enable caches to speed up checksum validation
Jagan Teki
- [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
Jagan Teki
- [PATCH v2 0/7] rockchip: Fix RK3328 USB support
Jagan Teki
- [PATCH 1/5] arch: rockchip: rk3588: Fix missing suffix 'A' for Edgeble Neu6A
Jagan Teki
- Pull request: u-boot-spi/master
Jagan Teki
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jagan Teki
- [PATCH 2/2] rockchip: edgeble-neu6: Append eMMC into spl-boot-order
Jagan Teki
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jagan Teki
- [PATCH 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jagan Teki
- [v2] mtd: spi-nor-ids: add xtxtech part#
Jagan Teki
- [PATCH v2 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jagan Teki
- [PATCH v2 2/2] rockchip: edgeble-neu6: Append eMMC into spl-boot-order
Jagan Teki
- [PATCH 03/29] spi: mtk_spim: get spi clk rate only once
Jagan Teki
- [PATCH 04/29] spi: mtk_spim: clear IRQ enable bits
Jagan Teki
- rk3588 status
Jagan Teki
- rk3588 status
Jagan Teki
- rk3588 status
Jagan Teki
- [PATCH v2 1/2] arm64: dts: rockchip: Sync DT from linux-next
Jagan Teki
- [PATCH v2 2/2] rockchip: edgeble-neu6: Append eMMC into spl-boot-order
Jagan Teki
- Pull request: u-boot-rockchip-20230728
Jagan Teki
- [PATCH] rockchip: rv1126: Enable fdtoverlay support
Jagan Teki
- Pull request: u-boot-rockchip-20230728
Jagan Teki
- [PATCH] arm: dts: imx8mm-phyboard-polis-rdk: Sync dts files with kernel
Cem Tenruh
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Devarsh Thakkar
- [PATCH 5/9] board_f: Fix corruption of relocaddr
Devarsh Thakkar
- [PATCH v2 5/9] board_f: Fix corruption of relocaddr
Devarsh Thakkar
- [PATCH v2 3/6] mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
Michael Nazzareno Trimarchi
- [PATCH] mtd: nand: pxa3xx: Fix buffer overflow during raw reads
Michael Nazzareno Trimarchi
- [PATCH 1/1] cmd: avoid overflow in mtd_is_aligned_with_min_io_size
Michael Nazzareno Trimarchi
- [PATCH 1/1] cmd: avoid overflow in mtd_is_aligned_with_min_io_size
Michael Nazzareno Trimarchi
- [PATCHv2 3/3] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv2 2/3] net/lwip: add README.lwip
Maxim Uvarov
- [PATCHv3 0/3] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv3 1/3] net/lwip: add lwip-external submodule
Maxim Uvarov
- [PATCHv3 2/3] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv3 3/3] net/lwip: add doc/develop/net_lwip.rst
Maxim Uvarov
- [PATCHv4 0/5] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv4 1/5] net/lwip: add lwip-external submodule
Maxim Uvarov
- [PATCHv4 2/5] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv4 3/5] net/lwip: add doc/develop/net_lwip.rst
Maxim Uvarov
- [PATCHv4 4/5] net/lwip: add dns command
Maxim Uvarov
- [PATCHv4 5/5] net/lwip: apps/http: add dns support
Maxim Uvarov
- [PATCHv4 2/5] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv4 0/5] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCHv4 2/5] net/lwip: add lwip library for the network stack
Maxim Uvarov
- [PATCH] net: ti: am65-cpsw-nuss: Use dedicated port mode control registers
Siddharth Vadapalli
- [PATCH 0/6] Add SGMII support for MAIN CPSW on TI's J7200 SoC
Siddharth Vadapalli
- [PATCH 1/6] dma: ti: Update J21E PSIL endpoint information for MAIN CPSW0
Siddharth Vadapalli
- [PATCH 2/6] net: ti: am65-cpsw-nuss: Add support for SGMII mode
Siddharth Vadapalli
- [PATCH 3/6] net: ti: am65-cpsw-nuss: Add logic to support MDIO reset
Siddharth Vadapalli
- [PATCH 4/6] phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J7200
Siddharth Vadapalli
- [PATCH 5/6] phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
Siddharth Vadapalli
- [PATCH 6/6] configs: j7200_evm_a72: Enable configs for SGMII support with MAIN CPSW0
Siddharth Vadapalli
- [PATCH] arm: mach-k3: *: dev-data: Update to use ARRAY_SIZE
Siddharth Vadapalli
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Siddharth Vadapalli
- [PATCH 3/6] net: ti: am65-cpsw-nuss: Add logic to support MDIO reset
Siddharth Vadapalli
- [PATCH 3/6] net: ti: am65-cpsw-nuss: Add logic to support MDIO reset
Siddharth Vadapalli
- [PATCH 1/2] ARM: armv7: Add C wrapper for allow_unaligned()
Marek Vasut
- [PATCH 2/2] ARM: arm11: Add C wrapper for allow_unaligned()
Marek Vasut
- [PATCH v2 1/3] sunxi: u-boot-spl.lds: Pass _image_binary_end
Marek Vasut
- [PATCH v2 2/3] microblaze: u-boot-spl.lds: Pass _image_binary_end
Marek Vasut
- [PATCH v2 3/3] spl: spl_legacy: Fix spl_end address
Marek Vasut
- [PATCH 1/2] ARM: armv7: Add C wrapper for allow_unaligned()
Marek Vasut
- [PATCH v2 1/2] ARM: armv7: Add C wrapper for allow_unaligned()
Marek Vasut
- [PATCH v2 2/2] ARM: arm11: Add C wrapper for allow_unaligned()
Marek Vasut
- [PATCH v2] ARM: imx: romapi: Fix signed integer bitwise ops misuse
Marek Vasut
- [PATCH] usb: dwc3-generic: Ensure reset GPIO is configured as an output
Marek Vasut
- [PULL] u-boot-usb/master
Marek Vasut
- [PATCH 1/2] mxs: Fix VDDx brownout interrupt disable/enable
Marek Vasut
- [PATCH 2/2] mxs: Don't enable 4P2 reg if MXS is powered only from DCDC_BATT
Marek Vasut
- [PATCH 1/2] mxs: Fix VDDx brownout interrupt disable/enable
Marek Vasut
- v2023.07-rc5 regression: Image overlaps SPL
Marek Vasut
- [PATCH 1/1] tools: spkgimage: correct printf specifier
Marek Vasut
- [PATCH] ARM: stm32: Power cycle Buck3 in reset on DHSOM
Marek Vasut
- [PATCH] ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
Marek Vasut
- [PATCH] ARM: stm32: Inhibit PDDS because CSTBYDIS is set
Marek Vasut
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Marek Vasut
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH] spl: Add function called after fpga image upload
Marek Vasut
- [PATCH] spl: Add function called after fpga image upload
Marek Vasut
- [PATCH] spl: Add function called after fpga image upload
Marek Vasut
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH] spl: Add function called after fpga image upload
Marek Vasut
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH v3] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH] ARM: stm32: Power cycle Buck3 in reset on DHSOM
Marek Vasut
- [PATCH] ARM: stm32: Power cycle Buck3 in reset on DHSOM
Marek Vasut
- [PATCH] ARM: stm32: Fix OF_LIST on DHCOR
Marek Vasut
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH] Makefile: Add missing quotes around sort --field-separator
Marek Vasut
- [PATCH] bdinfo: Correct use of assertions
Marek Vasut
- [PATCH] phy: adin: add readext and writeext support for mdio cmd
Marek Vasut
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Marek Vasut
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Marek Vasut
- [PATCH] bdinfo: Correct use of assertions
Marek Vasut
- [PATCH v2] bdinfo: Correct use of assertions
Marek Vasut
- [PATCH] phy: Fix generic_setup_phy return value on power on failure
Marek Vasut
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH v4] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH 1/2] phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs
Marek Vasut
- [PATCH 2/2] dt-bindings: add device tree bindings for mxl-8611x PHY
Marek Vasut
- [PATCH 2/2] dt-bindings: add device tree bindings for mxl-8611x PHY
Marek Vasut
- [PATCH v5] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Marek Vasut
- [PATCH 2/5] usb: dwc3-generic: Return early when there is no child node
Marek Vasut
- [PATCH 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Marek Vasut
- [PATCH] usb: ehci-mx6: remove unnecessary regulator enable from probe
Marek Vasut
- [PATCH v6 1/2] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH v6 2/2] phy: phy-imx8mq-usb: clean up clock code
Marek Vasut
- [PATCH v5] phy: phy-imx8mq-usb: add vbus regulator support
Marek Vasut
- [PATCH v7 2/2] phy: phy-imx8mq-usb: clean up clock code
Marek Vasut
- [PATCH v3 1/6] sysinfo: Add IDs for board id and revision
Marek Vasut
- [PATCH v3 2/6] cmd: Add a sysinfo command
Marek Vasut
- [PATCH v3 3/6] sysinfo: Add a test
Marek Vasut
- [PATCH v3 4/6] sysinfo: Add documentation
Marek Vasut
- [PATCH v3 5/6] sysinfo: rcar3: Use int instead of char for revision
Marek Vasut
- [PATCH 2/3] iopoll: Add readb_poll_sleep_timeout
Marek Vasut
- [PATCH 1/3] apple: Set up file system firmware loader
Marek Vasut
- [PATCH 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware
Marek Vasut
- [PATCH] ARM: dts: imx: Switch USB1 port control to GPIO on Data Modul i.MX8M Plus eDM SBC
Marek Vasut
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Marek Vasut
- [PATCH v2 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Marek Vasut
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Marek Vasut
- [PATCH] pci: Fix device_find_first_child() return value handling
Marek Vasut
- [PATCH] usb: mtu3: Fix device_find_first_child() return value handling
Marek Vasut
- [PATCH v2 2/5] usb: dwc3-generic: Return early when there is no child node
Marek Vasut
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH v2 2/4] usb: gadget: ether: Inline functions used once
Marek Vasut
- [PATCH v2 3/4] usb: gadget: ether: Move probe function above driver structure
Marek Vasut
- [PATCH v2 4/4] usb: gadget: ether: Handle gadget driver registration in probe and remove
Marek Vasut
- [PATCH] pci: Fix device_find_first_child() return value handling
Marek Vasut
- [PATCH 1/3] apple: Set up file system firmware loader
Marek Vasut
- [PATCH 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware
Marek Vasut
- [PATCH] ARM: imx: Update MAINTAINERS file on DH electronics i.MX8M Plus DHCOM
Marek Vasut
- [PATCH] usb: cdns3: gadget: Configure speed in udc_start
Marek Vasut
- Double free on xhci_register failure.
Marek Vasut
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH] Makefile: Use sort shortopts
Marek Vasut
- [PATCH] usb: cdns3: gadget: Configure speed in udc_start
Marek Vasut
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Marek Vasut
- [PATCH 1/1] spl: spl_legacy: simplify spl_parse_legacy_validate
Marek Vasut
- [PATCH 1/1] spl: spl_legacy: simplify spl_parse_legacy_validate
Marek Vasut
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH v3 4/6] sysinfo: Add documentation
Marek Vasut
- [PATCH v3 5/6] sysinfo: rcar3: Use int instead of char for revision
Marek Vasut
- [PATCH] ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
Marek Vasut
- [PATCH v5 3/3] usb: ohci-at91: Add USB PHY functionality
Marek Vasut
- [PATCH v5 2/3] usb: ohci-at91: Enable OHCI functionality and register into DM
Marek Vasut
- [PATCH 4/4] board/renesas: Add missing MAINTAINERS files
Marek Vasut
- [PATCH v1] HSD #18028953892: usb: xhci-dwc3: Fix USB3.1 controller register access in reset state
Marek Vasut
- [PATCH v3 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Marek Vasut
- [PATCH] ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
Marek Vasut
- [PATCH v2] ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
Marek Vasut
- [PATCH] xhci_register: Fix double free on failure
Marek Vasut
- [PULL] u-boot-usb/master
Marek Vasut
- [PATCH] gpio: Use separate bitfield array to indicate GPIO is claimed
Marek Vasut
- [PATCH] gpio: Use separate bitfield array to indicate GPIO is claimed
Marek Vasut
- [PATCH v4 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Marek Vasut
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Marek Vasut
- [PATCH v2] gpio: Use separate bitfield array to indicate GPIO is claimed
Marek Vasut
- [PATCH] arm: mxs: Fix ICOLL macro name typo
Marek Vasut
- [PATCH] arm: mxs: Clear CPSR V bit to activate low vectors
Marek Vasut
- [PATCH] common: Drop duplicate space in SPL_BMP description
Marek Vasut
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH v3 2/4] usb: gadget: ether: Inline functions used once
Marek Vasut
- [PATCH v3 3/4] usb: gadget: ether: Move probe function above driver structure
Marek Vasut
- [PATCH v3 4/4] usb: gadget: ether: Handle gadget driver registration in probe and remove
Marek Vasut
- [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH 1/3] ARM: imx: Factor out parsing of ROM log
Marek Vasut
- [PATCH 2/3] ARM: imx: Use correct U-Boot offset in case of secondary boot from eMMC
Marek Vasut
- [PATCH 3/3] ARM: imx: Add support for detecting primary/secondary bmode on MX8M
Marek Vasut
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Marek Vasut
- [PATCH] tools: relocate-rela: Fix BE symtab handling
Marek Vasut
- [PATCH 1/2] tools: relocate-rela: Add M68K support
Marek Vasut
- [PATCH 2/2] arch: m68k: Implement relocation
Marek Vasut
- [PATCH v4 4/5] usb: dwc3-generic: Add rk3568 support
Marek Vasut
- [PATCH v5 4/5] usb: dwc3-generic: Add rk3568 support
Marek Vasut
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [PATCH] spl: spl_legacy: Fix spl_end address for non ARM target
Marek Vasut
- [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Marek Vasut
- [RESEND PATCH v2 0/5] imx8mn-var-som: fix ethernet for Variscite symphony board and imx8m nano SOM
Hugo Villeneuve
- [RESEND PATCH v2 1/5] imx8mn-var-som: read and print SoM infos from eeprom on startup
Hugo Villeneuve
- [RESEND PATCH v2 2/5] imx8mn-var-som: fix non-applied PHY reset-gpios properties
Hugo Villeneuve
- [RESEND PATCH v2 3/5] arm: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
Hugo Villeneuve
- [RESEND PATCH v2 4/5] imx8mn-var-som: read eth MAC address from EEPROM
Hugo Villeneuve
- [RESEND PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
Hugo Villeneuve
- [RESEND PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
Hugo Villeneuve
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
David Virag
- [BUG] fdt_pack_reg in common/fdt_support.c can cause crash from unaligned access
David Virag
- [PATCH v2 0/6] introduce EFI_RAM_DISK_PROTOCOL
Tobias Waldekranz
- Problem upon startup with halted USB device on RaspberryPi 4
Harry Waschkeit
- [PATCH] tests: Fix exception when cleaning up skipped test
Joshua Watt
- [PATCH v2 0/5] Fix 'mbr' command with hybrid MBR/GPT
Joshua Watt
- [PATCH v2 1/5] dm: test: Fix partition test to use mmc2
Joshua Watt
- [PATCH v2 2/5] dm: test: Improve partition test error output
Joshua Watt
- [PATCH v2 3/5] disk: part: Add API to get partitions with specific driver
Joshua Watt
- [PATCH v2 4/5] dm: test: Add test for part_get_info_by_type
Joshua Watt
- [PATCH v2 5/5] cmd: mbr: Force DOS driver to be used for verify
Joshua Watt
- [PATCH] android_ab: Try backup booloader_message
Joshua Watt
- [PATCH] android_ab: Add option to skip decrementing tries
Joshua Watt
- [PATCH] net: wget: Avoid packet queue overflow
Richard Weinberger
- getting u-boot to work on raspi 3b (32bit)
Robert Wenisch
- AW: getting u-boot to work on raspi 3b (32bit)
Robert Wenisch
- [PATCH 01/14] bloblist: Update the tag numbering
Julius Werner
- [PATCH 10/14] bloblist: Handle alignment with a void entry
Julius Werner
- [PATCH 11/14] bloblist: Reduce blob-header size
Julius Werner
- [PATCH 13/14] bloblist: Add alignment to bloblist_new()
Julius Werner
- [PATCH 14/14] bloblist: Update documentation and header comment
Julius Werner
- [PATCH 01/14] bloblist: Update the tag numbering
Julius Werner
- Aw: Re: distro_boot vs. env-based bootmenu
Frank Wunderlich
- Aw: Re: Re: Re: distro_boot vs. env-based bootmenu
Frank Wunderlich
- [ANN] U-Boot v2023.07 released
Frank Wunderlich
- Aw: [PATCH 21/29] arm: dts: medaitek: convert gmac link mode to 2500base-x
Frank Wunderlich
- Aw: [PATCH 21/29] arm: dts: medaitek: convert gmac link mode to 2500base-x
Frank Wunderlich
- Aw: Re: [PATCH 21/29] arm: dts: medaitek: convert gmac link mode to 2500base-x
Frank Wunderlich
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Gao Xiang
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Gao Xiang
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Gao Xiang
- [PATCH] fs/erofs: Remove an unnecessary assertion
Gao Xiang
- [PATCH] Remove unused parameters
Yuepeng Xing
- [PATCH] clk: also return NULL for -ENOENT in devm_clk_get_optional functions
Yang Xiwen
- EFI breaks USB dual port detection - our observations
Da Xue
- bootstd regression from distro_bootcmd for removable EFI boot and weird return codes for fs
Da Xue
- bootstd regression from distro_bootcmd for removable EFI boot and weird return codes for fs
Da Xue
- bootstd regression from distro_bootcmd for removable EFI boot and weird return codes for fs
Da Xue
- [PATCH] stdio: Remove stdio_init()
Masahiro Yamada
- [PATCH v2] rockchip: rk3568: Add support for Lubancat2 board from EmbedFire
Andy Yan
- [PATCH v3] rockchip: rk3568: Add EmbedFire Lubancat 2 support
Andy Yan
- [PATCH v3] rockchip: rk3568: Add EmbedFire Lubancat 2 support
Andy Yan
- [PATCH v2 1/5] rockchip: Support OP-TEE for ARM in FIT images created by binman
Kever Yang
- [PATCH v2 2/5] configs: evb-rk3229: Increase SPL_STACK_R_MALLOC_SIMPLE_LEN
Kever Yang
- [PATCH v2 3/5] rockchip: RK322x: Select SPL_OPTEE_IMAGE
Kever Yang
- [PATCH v2 4/5] rockchip: evb_rk3229: Update/fix README
Kever Yang
- [PATCH v2 5/5] optee: Support Rockchip OP-TEE binaries
Kever Yang
- [PATCH] pci: pcie_dw_rockchip: Disable no used BAR0/BAR1
Kever Yang
- [PATCH v3 5/9] pci: pcie_dw_rockchip: Hide BARs of the root complex
Kever Yang
- [PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
Kever Yang
- [PATCH 2/4] rockchip: rk3308: no DEBUG_UART_BOARD_INIT for ROCK Pi S
Kever Yang
- [PATCH 3/4] rockchip: rk3308: add support for sdmmc boot
Kever Yang
- [PATCH 4/4] rockchip: rk3308: fix same-as-spl boot order
Kever Yang
- rk3588 status
Kever Yang
- [PATCH v4 5/9] pci: pcie_dw_rockchip: Disable unused BARs of the root complex
Kever Yang
- [PATCH v4 8/9] rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Kever Yang
- [PATCH v3 3/3] board: rockchip: Add Hardkernel ODROID-M1
Kever Yang
- [PATCH v3 0/3] board: rockchip: Add Hardkernel ODROID-M1
Kever Yang
- [PATCH] rockchip: veyron: Enable Winbond SPI flash
Kever Yang
- [PATCH 1/5] board: rockchip: Add Pine64 Quartz64-A Board
Kever Yang
- [PATCH 2/5] board: rockchip: Add Pine64 Quartz64-B Board
Kever Yang
- [PATCH 3/5] board: rockchip: Add Pine64 SOQuartz on Model A
Kever Yang
- [PATCH 4/5] board: rockchip: Add Pine64 SOQuartz on Blade
Kever Yang
- [PATCH 5/5] board: rockchip: Add Pine64 SOQuartz on CM4-IO
Kever Yang
- [PATCH] board: rockchip: Add Radxa E25 Carrier Board
Kever Yang
- [PATCH v2] board: rockchip: Add Radxa E25 Carrier Board
Kever Yang
- [PATCH] rockchip: px30: Define variables for compressed image support
Kever Yang
- [PATCH v1 1/2] arm: rockchip: sync ROCK Pi 4 SoCs from Linux
Kever Yang
- [PATCH v1 2/2] arm: rockchip: Add Radxa ROCK 4SE
Kever Yang
- [PATCH v1 0/2] Add support for Radxa ROCK 4SE
Kever Yang
- [PATCH] configs: rockchip: drop useless DEBUG_UART_SKIP_INIT
Kever Yang
- [PATCH 1/2] rockchip: rk3568-rock-3a: Fix SPI Flash alias
Kever Yang
- [PATCH 2/2] rockchip: rk3588-rock-5b: Fix SPI Flash alias
Kever Yang
- [PATCH v4 1/2] ARM: dts: rockchip: rk3588: Move bootph-all props to common file
Kever Yang
- [PATCH v4 2/2] board: rockchip: add Radxa ROCK5A Rk3588 board
Kever Yang
- [PATCH v1] configs: rockchip: rock5b-rk3588: Enable CONFIG_PCI_INIT_R
Kever Yang
- [PATCH 1/4] phy: rockchip: add usbdp combo phy driver
Kever Yang
- [PATCH 2/4] ARM: dts: rockchip: rk3588: add support for USB 3.0 devices
Kever Yang
- [PATCH 3/4] ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB3 support
Kever Yang
- [PATCH 4/4] configs: rock5b-rk3588: enable USB 3.0 controller, command, gadget
Kever Yang
- [PATCH 1/5] arch: rockchip: rk3588: Fix missing suffix 'A' for Edgeble Neu6A
Kever Yang
- [PATCH 2/5] arm64: dts: rockchip: Add Rockchip RK3588J
Kever Yang
- [PATCH 3/5] ARM: dts: rockchip: Add rk3588j-u-boot.dtsi
Kever Yang
- [PATCH 4/5] arm64: dts: rockchip: Add rk3588 Edgeble Neu6B
Kever Yang
- [PATCH 5/5] board: rockchip: Add Edgeble Neural Compute Module 6B
Kever Yang
- [PATCH] pci: rockchip: Release resources on failing probe
Kever Yang
- [PATCH 1/7] rockchip: veyron: Enable RESET driver
Kever Yang
- [PATCH 2/7] rockchip: veyron: Enable building SPI ROM images
Kever Yang
- [PATCH 3/7] rockchip: veyron: Unify u-boot.dtsi bootph-all fragments
Kever Yang
- [PATCH 4/7] rockchip: veyron: Add serial, logging, silent console support
Kever Yang
- [PATCH 5/7] rockchip: veyron: Use TrueType fonts
Kever Yang
- [PATCH 6/7] rockchip: chromebook_jerry: Re-enable MAX98090 codec driver
Kever Yang
- [PATCH 7/7] rockchip: chromebook_speedy: Enable sound
Kever Yang
- [PATCH v2 5/5] optee: Support Rockchip OP-TEE binaries
Kever Yang
- [PATCH v2 1/2] arm64: dts: rockchip: Sync DT from linux-next
Kever Yang
- [PATCH v2 2/2] rockchip: edgeble-neu6: Append eMMC into spl-boot-order
Kever Yang
- [PATCH 1/4] rockchip: rk356x: Sync dtsi from linux v6.4
Kever Yang
- [PATCH 2/4] rockchip: rk3566-radxa-cm3-io: Sync dts from linux v6.4
Kever Yang
- [PATCH 3/4] rockchip: rk356x-u-boot: Add bootph-all to common pinctrl nodes
Kever Yang
- [PATCH 4/4] rockchip: rk356x-u-boot: Use relaxed u-boot,spl-boot-order
Kever Yang
- [PATCH 2/2] power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
Kever Yang
- [PATCH] rockchip: rk3568: Fix alloc space exhausted in SPL
Kever Yang
- [PATCH] rockchip: board: Update Odroid Go2 to Support Additional Revisions
Kever Yang
- [PATCH V2 1/6] board: rockchip: Correct i2c2 pinctrl for RGxx3
Kever Yang
- [PATCH V2 2/6] board: rockchip: add DSI and DSI-DPHY for Anbernic RGxx3
Kever Yang
- [PATCH V2 3/6] board: rockchip: Add support for RG353PS to RGxx3
Kever Yang
- [PATCH V2 4/6] board: rockchip: Add panel auto-detection for Anbernic RGxx3
Kever Yang
- [PATCH V2 5/6] configs: Update anbernic-rgxx3_defconfig for panel detection
Kever Yang
- [PATCH V2 6/6] doc: anbernic: Update RGxx3 Docs for panel detection
Kever Yang
- [PATCH v2 2/2] rockchip: rk3328: Add support for Orange Pi R1 Plus LTS
Kever Yang
- [PATCH v3 2/5] usb: dwc3-generic: Return early when there is no child node
Kever Yang
- [PATCH v3 3/5] usb: dwc3-generic: Relax unsupported dr_mode check
Kever Yang
- [PATCH v3 5/5] rockchip: rk3568: Use dwc3-generic driver
Kever Yang
- [PATCH v2 1/7] arm64: dts: rockchip: Drop unused rk3328-xhci node
Kever Yang
- [PATCH v2 2/7] configs: Drop unused XHCI_DWC3 for RK3328 boards
Kever Yang
- [PATCH v2 3/7] usb: dwc3-generic: Restrict single ctrl node for RK3328
Kever Yang
- [PATCH v2 4/7] configs: Enable DWC3 USB 3.0 on RK3328 boards
Kever Yang
- [PATCH v2 5/7] phy: rockchip-inno-usb2: Add USB2 PHY for RK3328
Kever Yang
- [PATCH v2 6/7] clk: rockchip: rk3328: Handle usb480m phy clock
Kever Yang
- [PATCH v2 7/7] configs: rockchip: Enable USB2PHY for RK3328 boards
Kever Yang
- [PATCH 2/4] config: rock64: enable efuse for stable mac addr
Kever Yang
- [PATCH 3/4] rockchip: dts: rk3328: Add rng details to u-boot.dtsi
Kever Yang
- [PATCH 4/4] rockchip: dts: rk3328: rock64: Align spi flash entry
Kever Yang
- [PATCH 1/4] config: rock64: start USB to make storage usable
Kever Yang
- [PATCH next v3 1/2] rockchip: rk3399: pass platform parameter to TF-A by default for new RK3399 boards
Kever Yang
- [PATCH next v3 2/2] rockchip: puma: pass platform parameter to TF-A
Kever Yang
- [PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
Kever Yang
- [PATCH v3 2/3] cmd: ini: Fix build warning
Kever Yang
- [PATCH v2 1/4] rockchip: Add support to generate GZIP compressed U-boot binary
Kever Yang
- [PATCH v2 2/4] rockchip: Add support to generate LZMA compressed U-boot binary
Kever Yang
- [PATCH v2 3/4] spl: fit: support for booting a GZIP-compressed U-boot binary
Kever Yang
- [PATCH v2 3/4] spl: fit: support for booting a GZIP-compressed U-boot binary
Kever Yang
- [PATCH 3/4] rockchip: rk356x-u-boot: Add bootph-all to common pinctrl nodes
Kever Yang
- [PATCH 0/5] board: rockchip: Add Pine64 Quartz64 and SOQuartz boards
Kever Yang
- Pull request: u-boot-rockchip-20230728
Kever Yang
- Pull request: u-boot-rockchip-20230728
Kever Yang
- R: Pull request: u-boot-rockchip-20230728
Kever Yang
- [PATCH] rockchip: rv1126: Enable fdtoverlay support
Kever Yang
- [PATCH v2 1/5] rockchip: rk3399-rockpro64: Fix SPL max size and SPI flash payload offset
Kever Yang
- [PATCH v2 2/5] rockchip: rk3399-pinebook-pro: Fix SPL max size and SPI flash payload offset
Kever Yang
- [PATCH v2 3/5] rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload offset
Kever Yang
- [PATCH v2 4/5] rockchip: rk3399-roc-pc: Fix SPL max size and SPI flash payload offset
Kever Yang
- [PATCH v2 5/5] doc: rockchip: Update SPI flashing instruction
Kever Yang
- [PATCH 1/2] DO NOT MERGE: mmc: dw_mmc: Keep vqmmc-supply enable count in balance
Kever Yang
- [PATCH 2/2] power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
Kever Yang
- R: Pull request: u-boot-rockchip-20230728
Kever Yang
- Pull request: u-boot-rockchip-20230731
Kever Yang
- [PATCH] spl: spl_legacy: Fix spl_end address for non ARM target
Shiji Yang
- [PATCH] spl: spl_legacy: Fix spl_end address for non ARM target
Shiji Yang
- [PATCH] spl: spl_legacy: Fix spl_end address for non ARM target
Shiji Yang
- [PATCH 0/7] rockchip: veyron: Synchronize changes for veyron boards
Alper Nebi Yasak
- [PATCH 1/7] rockchip: veyron: Enable RESET driver
Alper Nebi Yasak
- [PATCH 2/7] rockchip: veyron: Enable building SPI ROM images
Alper Nebi Yasak
- [PATCH 3/7] rockchip: veyron: Unify u-boot.dtsi bootph-all fragments
Alper Nebi Yasak
- [PATCH 4/7] rockchip: veyron: Add serial, logging, silent console support
Alper Nebi Yasak
- [PATCH 5/7] rockchip: veyron: Use TrueType fonts
Alper Nebi Yasak
- [PATCH 6/7] rockchip: chromebook_jerry: Re-enable MAX98090 codec driver
Alper Nebi Yasak
- [PATCH 7/7] rockchip: chromebook_speedy: Enable sound
Alper Nebi Yasak
- [PATCH] efi_loader: Increase default variable store size to 32K
Alper Nebi Yasak
- [PATCH] efi_loader: Avoid underflow when calculating remaining var store size
Alper Nebi Yasak
- [PATCH 2/2] schemas: Add a schema for binman
Alper Nebi Yasak
- [PATCH] rockchip: veyron: Enable Winbond SPI flash
Alper Nebi Yasak
- R: Pull request: u-boot-rockchip-20230728
Alper Nebi Yasak
- [PATCH] fs/erofs: Introduce new features including ztailpacking, fragments and dedupe
Yifan Zhao
- [PATCH] fs/erofs: Remove an unnecessary assertion
Yifan Zhao
- [RFC PATCH] riscv: sifive: fu70: downclock CPU clock for stability
Icenowy Zheng
- fdt_high default value causes unbootable kernel due to misalignment
Tim van der Staaij | Zign
- fdt_high default value causes unbootable kernel due to misalignment
Tim van der Staaij | Zign
- [PATCH v1 0/5] verdin-imx8mm/verdin-imx8mp: fix ctrl_sleep_moci# handling
Marcel Ziswiler
- [PATCH v1 1/5] verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux
Marcel Ziswiler
- [PATCH v1 2/5] configs: verdin-imx8mm: enable spl_gpio_hog
Marcel Ziswiler
- [PATCH v1 3/5] arm64: dts: verdin-imx8mm: add ctrl_sleep_moci# hog
Marcel Ziswiler
- [PATCH v1 4/5] configs: verdin-imx8mp: enable spl_gpio_hog
Marcel Ziswiler
- [PATCH v1 5/5] arm64: dts: verdin-imx8mp: add ctrl_sleep_moci# hog
Marcel Ziswiler
- [PATCH v3 0/3] board: toradex: add verdin am62 support
Marcel Ziswiler
- [PATCH v3 1/3] toradex: tdx-cfg-block: add verdin am62 skus
Marcel Ziswiler
- [PATCH v3 2/3] arm: mach-k3: am62: fix 2nd mux option of clkout0
Marcel Ziswiler
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Marcel Ziswiler
- Strange construct in binman description
Marcel Ziswiler
- [PATCH v3 3/3] board: toradex: add verdin am62 support
Marcel Ziswiler
- [PATCH v2 0/4] net: ti: am65-cpsw-nuss: Drop custom properties
Marcel Ziswiler
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Marcel Ziswiler
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
Marcel Ziswiler
- [PATCH v4 0/3] board: toradex: add verdin am62 support
Marcel Ziswiler
- [PATCH v4 1/3] toradex: tdx-cfg-block: add verdin am62 skus
Marcel Ziswiler
- [PATCH v4 2/3] arm: mach-k3: am62: fix 2nd mux option of clkout0
Marcel Ziswiler
- [PATCH v4 3/3] board: toradex: add verdin am62 support
Marcel Ziswiler
- nand flash driver
momo aubin
- [PATCH V2 06/30] imx: congatec/cgtqmx8: correct SCU API usage
sbabic at denx.de
- [PATCH] imx8m: soc.c: demote some printfs to debug
sbabic at denx.de
- [PATCH V2 04/30] imx: siemens/capricorn: correct SCU API usage
sbabic at denx.de
- [PATCH] board: gateworks: venice: assume emmc device for USB boot
sbabic at denx.de
- [PATCH v2 3/5] arm: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
sbabic at denx.de
- [PATCH v1 08/16] dts: xea: Disable 'clks' node for xea (imx287)
sbabic at denx.de
- [PATCH] ARM: imx9: support env in fat and ext4
sbabic at denx.de
- [PATCH v1 10/16] serial: pl01x: Prepare the driver to support SPL_OF_PLATDATA
sbabic at denx.de
- [PATCH V2 13/30] imx: cmd_dek: Fix Uninitialized pointer read
sbabic at denx.de
- [PATCH 4/5] imx8m: imx8mn-beacon: Migrate README to rst
sbabic at denx.de
- [PATCH V2 01/30] imx: mach: correct SCU API usage
sbabic at denx.de
- [PATCH v1 05/16] dts: xea: Enable debug UART support in XEA's SPL (DM_SERIAL)
sbabic at denx.de
- [PATCH V2 24/30] imx: imx8m: clock: not configure reserved SRC register
sbabic at denx.de
- [PATCH 2/5] arm: mxs: Provide Kconfig option to disable battery charging at IMX28 PMU
sbabic at denx.de
- [PATCH v2] phy: phy-imx8mq-usb: add vbus regulator support
sbabic at denx.de
- [PATCH 1/5] board: gateworks: venice: dynamically determine U-Boot raw sector
sbabic at denx.de
- [PATCH V2 11/30] imx: ele_api: support program secure fuse and return lifecycle
sbabic at denx.de
- [PATCH V2 19/30] imx: image-container: Fix container header checking
sbabic at denx.de
- [PATCH v1 01/16] dts: xea: Delete not used in u-boot DTS nodes
sbabic at denx.de
- [PATCH V2 17/30] imx: imx8ulp: start the ELE RNG at boot
sbabic at denx.de
- [PATCH v1 07/16] dts: xea: Remove clocks property from debug UART on XEA
sbabic at denx.de
- [PATCH V2 16/30] imx: misc: ele_mu: Update ELE MU driver
sbabic at denx.de
- [PATCH 2/5] board: gateworks: venice: dynamically determine U-Boot env partition
sbabic at denx.de
- [PATCH 1/2] doc: board: phytec: add phycore_imx8mm
sbabic at denx.de
- [PATCH V2 15/30] imx: misc: ele_mu: Update MU TR registers count
sbabic at denx.de
- [PATCH V2 18/30] imx: hab: Fix coverity issue in HAB event decoding
sbabic at denx.de
- [PATCH V2 26/30] imx: ahab: Update AHAB for iMX8 and iMX8ULP
sbabic at denx.de
- [PATCH] ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
sbabic at denx.de
- [PATCH v1] toradex: tdx-cfg-block: add 0070 verdin i.mx 8m plus quad sku
sbabic at denx.de
- [PATCH 3/5] arm: mxs: Provide Kconfig option to not enable 4P2 regulator in IMX28 PMU
sbabic at denx.de
- [PATCH V2 12/30] imx: ele_api: add DEK Blob generation
sbabic at denx.de
- [PATCH V2 02/30] imx: toradex/apalis-imx8: correct SCU API usage
sbabic at denx.de
- [PATCH V2 03/30] imx: toradex/colibri-imx8x: correct SCU API usage
sbabic at denx.de
- [PATCH v1 12/16] arm: mxs: Prevent serial console init when in very early SPL boot code
sbabic at denx.de
- [PATCH V2 20/30] imx: iamge-container: support secondary container
sbabic at denx.de
- [PATCH V2 27/30] imx: imx8: ahab: sha256: enable image verification using ARMv8 crypto extension
sbabic at denx.de
- [PATCH v1 15/16] config: xea: Enable DM_SERIAL for the XEA (imx287 based) board
sbabic at denx.de
- [PATCH V2 25/30] imx: parse-container: Use malloc for container processing
sbabic at denx.de
- [PATCH 5/5] imx8m: beacon: Update MAINTAINER file to include beacon rst files
sbabic at denx.de
- [PATCH 1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source
sbabic at denx.de
- [PATCH 2/2] doc: board: phytec: add phycore_imx8mp
sbabic at denx.de
- [PATCH v2] ARM: imx: romapi: Fix signed integer bitwise ops misuse
sbabic at denx.de
- [PATCH 2/2] imx93_evk: defconfig: add adc support
sbabic at denx.de
- [PATCH] board: gateworks: venice: display dram speed
sbabic at denx.de
- [PATCH V2 23/30] imx: imx8: bootaux: Add i.MX8 M4 boot support
sbabic at denx.de
- [PATCH v1 04/16] spl: xea: Provide stub DM driver for imx28 clocks
sbabic at denx.de
- [PATCH V2 14/30] imx: cmd_dek: add ELE DEK Blob generation support
sbabic at denx.de
- [PATCH V2 29/30] imx: priblob: Update to use structure
sbabic at denx.de
- [PATCH V2 2/2] configs: imx: imx8mm_beacon: Add config option for QSPI booting
sbabic at denx.de
- [PATCH v1 16/16] config: xea: Enable DM_SERIAL for the XEA - single binary (SB) u-boot
sbabic at denx.de
- [PATCH] board: gateworks: venice: switch to 2-bank dram config
sbabic at denx.de
- [PATCH] board: phytec: phycore_imx8mm: Update lpddr4_timing
sbabic at denx.de
- [PATCH v1 11/16] serial: pl01x: Modify pending callback to test if transmit FIFO is empty
sbabic at denx.de
- [PATCH v1] colibri_imx6: fix RALAT and WALAT values
sbabic at denx.de
- [PATCH 2/2] configs: phycore-imx8mm_defconfig: Enable LTO
sbabic at denx.de
- [PATCH V2 08/30] imx: use generic name ele(EdgeLockSecure Enclave)
sbabic at denx.de
- [PATCH 3/5] imx: imx8mn-beacon: Move environment definition to env file
sbabic at denx.de
- [PATCH] power: imx8m-power-domain: Add delay to align with kernel driver
sbabic at denx.de
- [PATCH V2 22/30] imx: bootaux: Fix bootaux issue when running on ARM64
sbabic at denx.de
- [PATCH] arm: mx6: module_fuse: fix build failure due to wrong argument name
sbabic at denx.de
- [PATCH v1 03/16] defconfig: xea: Change default spi-nor memory bus to 2
sbabic at denx.de
- [PATCH 2/5] imx8m: imx8mm-beacon: Migrate README to rst
sbabic at denx.de
- [PATCH] board: gateworks: venice: add imx8mp-gw7905-2x support
sbabic at denx.de
- [PATCH v1 09/16] serial: pl01x: Change OF_CONTROL to OF_REAL
sbabic at denx.de
- [PATCH] board: gateworks: venice: add GPIO name lookup
sbabic at denx.de
- [PATCH 1/2] configs: phycore-imx8mp_defconfig: Enable LTO
sbabic at denx.de
- [PATCH v2 2/5] imx8mn-var-som: fix non-applied PHY reset-gpios properties
sbabic at denx.de
- [PATCH v1 06/16] dts: xea: Add u-boot specific 'type' property to duart
sbabic at denx.de
- [PATCH 4/5] board: gateworks: venice: move env location
sbabic at denx.de
- [PATCH V2 1/2] imx: imx8mm-beacon: Enable FlexSPI in U-Boot
sbabic at denx.de
- [PATCH] arm: dts: imx8m: move CAAM nodes into common u-boot.dtsi
sbabic at denx.de
- [PATCH v2] mx8m: csf.sh: use vars for keys to avoid file edits when signing
sbabic at denx.de
- [PATCH V2 05/30] imx: advantech: correct SCU API usage
sbabic at denx.de
- [PATCH V2 07/30] imx: scu_api: update to version 1.16 and add more APIs
sbabic at denx.de
- [PATCH 5/5] arm: config: Adjust imx287 based XEA board PMU configuration
sbabic at denx.de
- [PATCH] configs: imx8m: Prepare imx8m-venice boards for HAB support
sbabic at denx.de
- [PATCH v2 4/5] imx8mn-var-som: read eth MAC address from EEPROM
sbabic at denx.de
- [PATCH 4/5] arm: mxs: Add function to dump PMU registers
sbabic at denx.de
- [PATCH] board: gateworks: venice: add eraseenv command
sbabic at denx.de
- [PATCH 1/5] imx: imx8mm-beacon: Move environment definition to env file
sbabic at denx.de
- [PATCH 3/5] board: gateworks: venice: dynamically update the update_firmware script
sbabic at denx.de
- [PATCH v1 14/16] arm: Kconfig: Switch XEA (imx287 based) board to use CONFIG_PL01X_SERIAL
sbabic at denx.de
- [PATCH V2 10/30] imx: ele_ahab: use hextoul
sbabic at denx.de
- [PATCH V2 30/30] imx: fsl_sec: preprocessor casting issue with addresses involving math
sbabic at denx.de
- [PATCH V2 09/30] imx: parse-container: fix build warning
sbabic at denx.de
- [PATCH 1/2] dm: adc: add iMX93 ADC support
sbabic at denx.de
- [PATCH v1] configs: verdin-imx8mp: enable ARCH_MISC_INIT
sbabic at denx.de
- [PATCH v1 13/16] arm: xea: Call spl_early_init() before DM serial console is enabled in SPL
sbabic at denx.de
- [PATCH V2 28/30] imx: imx8m: add CAAM_BASE_ADDR
sbabic at denx.de
- [PATCH 5/5] board: gateworks: venice: update board doc to show other emmc parts
sbabic at denx.de
- [PATCH V2 21/30] imx: bootaux: change names of MACROs used to boot MCU on iMX devices
sbabic at denx.de
- [PATCH v2 1/5] imx8mn-var-som: read and print SoM infos from eeprom on startup
sbabic at denx.de
- [PATCH v1 1/2] colibri-imx8x: print firmware versions
sbabic at denx.de
- [PATCH v1 02/16] dts: xea: Provide missing FEC required properties (mac0 and reg_fec_3v3)
sbabic at denx.de
- [PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
sbabic at denx.de
- [PATCH v1 2/2] board: colibri-imx8x: initialize snvs
sbabic at denx.de
- [PATCH v2 5/5] imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
sbabic at denx.de
- [PATCH v1 3/5] arm64: dts: verdin-imx8mm: add ctrl_sleep_moci# hog
sbabic at denx.de
- [PATCH] arm: dts: imx8mp-beacon-kit: Enable USB Power domains
sbabic at denx.de
- [PATCH 1/2] clk: imx8mp: Update clocks based on kernel 6.4-RC4
sbabic at denx.de
- [PATCH v1 2/5] configs: verdin-imx8mm: enable spl_gpio_hog
sbabic at denx.de
- [PATCH 3/3] mx23_olinuxino: Convert to CONFIG_DM_SERIAL
sbabic at denx.de
- [PATCH v1 5/5] arm64: dts: verdin-imx8mp: add ctrl_sleep_moci# hog
sbabic at denx.de
- [PATCH 2/3] mx23evk: Convert to CONFIG_DM_SERIAL
sbabic at denx.de
- [PATCH v1 2/2] board: colibri-imx8x: initialize snvs
sbabic at denx.de
- [PATCH 1/2] config: xea: Disable support for boot methods EXTLINUX and VBE
sbabic at denx.de
- [PATCH v1 1/5] verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux
sbabic at denx.de
- [PATCH 2/2] config: xea: Disable support for FAT file system
sbabic at denx.de
- [PATCH 1/3] mx28evk: Convert to CONFIG_DM_SERIAL
sbabic at denx.de
- [PATCH v1 4/5] configs: verdin-imx8mp: enable spl_gpio_hog
sbabic at denx.de
- [PATCH 2/2] arm: dts: imx8mp: Sync the DT with kernel 6.4-rc4
sbabic at denx.de
- [PATCH] mx7dsabresd: Retrieve the second MAC address from fuses
sbabic at denx.de
- [PATCH] arm64: imx: imx8mp-beacon: Enable LTO
sbabic at denx.de
- [PATCH v3] mips: dts: add initial support for ls1c300 SoC
dhu at hodcarrier.org
- [PATCH] rockchip: rk3399: nanopc-t4: use 1600MHz sdram config
Lu jicong
- [PATCH v4 1/2] net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
mripard at kernel.org
- [PATCH] net: dhcp6: Fix OPT_BOOTFILE_PARAM parsing
seanedmond at linux.microsoft.com
- [PATCH] net: Get pxe config file from dhcp option 209
seanedmond at linux.microsoft.com
- [PATCH 2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
Durai.ManickamKR at microchip.com
- [PATCH 3/5] ARM: dts: at91: sam9x60: Change i2c compatible
Durai.ManickamKR at microchip.com
- [PATCH 2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
Durai.ManickamKR at microchip.com
- [PATCH 3/5] ARM: dts: at91: sam9x60: Change i2c compatible
Durai.ManickamKR at microchip.com
- [u-boot][PATCH] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Mihai.Sain at microchip.com
- [PATCH] configs: sama5d2: enable CONFIG_LTO
Mihai.Sain at microchip.com
- [PATCH] configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO
Mihai.Sain at microchip.com
- [PATCH v2] lib: sparse: allocate FASTBOOT_MAX_BLK_WRITE instead of small number
qianfan
- data abort when run 'dhcp'
qianfan
- patch to submit
mark roths
- [PATCH v4 0/4] SPL NVMe support
mchitale at ventanamicro.com
- [PATCH v4 0/4] SPL NVMe support
mchitale at ventanamicro.com
- [PATCH v4 0/4] SPL NVMe support
mchitale at ventanamicro.com
- [PATCH 1/1] spl: blk: use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
mchitale at ventanamicro.com
- [PATCH 1/1] spl: blk: partition numbers are hexadecimal
mchitale at ventanamicro.com
- [PATCH v2 1/1] spl: initialize PCI before booting
mchitale at ventanamicro.com
- [PATCH v2 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v2 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v2 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v2 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v3 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v3 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v3 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v3 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v4 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v4 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v4 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v4 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v2] xilinx: zynqmp: Extract aes operation into new file
christian.taedcke-oss at weidmueller.com
- [PATCH v2] event: Add fpga load event
christian.taedcke-oss at weidmueller.com
- [PATCH v3] event: Add fpga load event
christian.taedcke-oss at weidmueller.com
- [PATCH v5 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v5 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v5 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v5 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v6 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v6 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v6 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v6 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v3] xilinx: zynqmp: Extract aes operation into new file
christian.taedcke-oss at weidmueller.com
- [PATCH v4 1/2] board/km/cent2: add include common.h
christian.taedcke-oss at weidmueller.com
- [PATCH v4 2/2] event: Add fpga load event
christian.taedcke-oss at weidmueller.com
- [PATCH v5] event: Add fpga load event
christian.taedcke-oss at weidmueller.com
- [PATCH v7 0/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v7 1/3] binman: Add support for externally encrypted blobs
christian.taedcke-oss at weidmueller.com
- [PATCH v7 2/3] binman: Allow cipher node as special section
christian.taedcke-oss at weidmueller.com
- [PATCH v7 3/3] binman: Add tests for etype encrypted
christian.taedcke-oss at weidmueller.com
- [PATCH v4] xilinx: zynqmp: Extract aes operation into new file
christian.taedcke-oss at weidmueller.com
- [PATCH v2 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
lukas.funke-oss at weidmueller.com
- [PATCH v2 01/11] binman: elf: Check for ELF_TOOLS availability and remove extra semicolon
lukas.funke-oss at weidmueller.com
- [PATCH v2 02/11] binman: Don't decompress data while signing
lukas.funke-oss at weidmueller.com
- [PATCH v2 03/11] binman: blob_dtb: Add fake_size argument to ObtainContents()
lukas.funke-oss at weidmueller.com
- [PATCH v2 04/11] binman: doc: Add documentation for fdt_add_pubkey bintool
lukas.funke-oss at weidmueller.com
- [PATCH v2 05/11] binman: ftest: Add test for u_boot_spl_pubkey_dtb
lukas.funke-oss at weidmueller.com
- [PATCH v2 06/11] binman: btool: Add fdt_add_pubkey as btool
lukas.funke-oss at weidmueller.com
- [PATCH v2 07/11] binman: etype: Add u_boot_spl_pubkey_dtb etype
lukas.funke-oss at weidmueller.com
- [PATCH v2 08/11] binman: doc: Add documentation for Xilinx Bootgen bintool
lukas.funke-oss at weidmueller.com
- [PATCH v2 09/11] binman: btool: Add Xilinx Bootgen btool
lukas.funke-oss at weidmueller.com
- [PATCH v2 10/11] binman: ftest: Add test for xilinx_fsbl_auth etype
lukas.funke-oss at weidmueller.com
- [PATCH v2 11/11] binman: etype: Add xilinx_fsbl_auth etype
lukas.funke-oss at weidmueller.com
- [PATCH v3 00/11] Sign Xilinx ZynqMP SPL/FSBL boot images using binman
lukas.funke-oss at weidmueller.com
- [PATCH v3 01/11] binman: elf: Check for ELF_TOOLS availability and remove extra semicolon
lukas.funke-oss at weidmueller.com
- [PATCH v3 02/11] binman: Don't decompress data while signing
lukas.funke-oss at weidmueller.com
- [PATCH v3 03/11] binman: blob_dtb: Add fake_size argument to ObtainContents()
lukas.funke-oss at weidmueller.com
- [PATCH v3 04/11] binman: doc: Add documentation for fdt_add_pubkey bintool
lukas.funke-oss at weidmueller.com
- [PATCH v3 05/11] binman: ftest: Add test for u_boot_spl_pubkey_dtb
lukas.funke-oss at weidmueller.com
- [PATCH v3 06/11] binman: btool: Add fdt_add_pubkey as btool
lukas.funke-oss at weidmueller.com
- [PATCH v3 07/11] binman: etype: Add u-boot-spl-pubkey-dtb etype
lukas.funke-oss at weidmueller.com
- [PATCH v3 08/11] binman: doc: Add documentation for Xilinx Bootgen bintool
lukas.funke-oss at weidmueller.com
- [PATCH v3 09/11] binman: btool: Add Xilinx Bootgen btool
lukas.funke-oss at weidmueller.com
- [PATCH v3 10/11] binman: ftest: Add test for xilinx_fsbl_auth etype
lukas.funke-oss at weidmueller.com
- [PATCH v3 11/11] binman: etype: Add xilinx_fsbl_auth etype
lukas.funke-oss at weidmueller.com
- [PATCH 2/2] power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
zhangqing
- RPi Zero 2 W usb keyboard support?
Filip Žaludek
- RPi Zero 2 W usb keyboard support?
Filip Žaludek
Last message date:
Mon Jul 31 23:48:09 CEST 2023
Archived on: Tue Aug 1 05:14:23 CEST 2023
This archive was generated by
Pipermail 0.09 (Mailman edition).