[PATCH v2 3/3] fixup! arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

[Maxime Ripard]

Dropping ranges entirely doesn't work since the register offset on the
MDIO device node will now be completely off, so we need to adjust it to
the right value without the translation.

We also need to have an empty ranges property for the reg address to be
properly evaluated.

Signed-off-by: Maxime Ripard <mripard at kernel.org>
---
 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index db814ed02a7e..77c9e4cb87f7 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -119,8 +119,8 @@
 };
 
 &cpsw3g {
-	/delete-property/ ranges;
 	bootph-pre-ram;
+	ranges;
 
 	cpsw-phy-sel at 04044 {
 		compatible = "ti,am64-phy-gmii-sel";
@@ -129,6 +129,10 @@
 	};
 };
 
+&cpsw3g_mdio {
+	reg = <0x0 0x8000f00 0x0 0x100>;
+};
+
 &cpsw_port1 {
 	bootph-pre-ram;
 };

-- 
2.41.0