[PATCH v1 4/6] power: regulator: tps80031: add regulator support
Svyatoslav Ryhel
clamor95 at gmail.com
Fri Jul 14 18:16:19 CEST 2023
The driver provides regulator set/get voltage enable/disable
functions for TI TPS80031/TPS80032 PMICs.
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
drivers/power/regulator/Kconfig | 8 +
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/tps80031_regulator.c | 296 +++++++++++++++++++
3 files changed, 305 insertions(+)
create mode 100644 drivers/power/regulator/tps80031_regulator.c
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 571debd54e..f297e408cd 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -355,6 +355,14 @@ config DM_REGULATOR_TPS62360
implements the get/set api for value only, as the power line is
always on.
+config DM_REGULATOR_TPS80031
+ bool "Enable driver for TPS80031/TPS80032 PMIC regulators"
+ depends on DM_PMIC_TPS80031
+ ---help---
+ This enables implementation of driver-model regulator uclass
+ features for TPS80031/TPS80032 PMICs. The driver implements
+ get/set api for: value and enable.
+
config DM_REGULATOR_STPMIC1
bool "Enable driver for STPMIC1 regulators"
depends on DM_REGULATOR && PMIC_STPMIC1
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index 8d73169b50..3ef55dc534 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o
obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
diff --git a/drivers/power/regulator/tps80031_regulator.c b/drivers/power/regulator/tps80031_regulator.c
new file mode 100644
index 0000000000..c970f5a92d
--- /dev/null
+++ b/drivers/power/regulator/tps80031_regulator.c
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright(C) 2023 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <errno.h>
+#include <dm.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/tps80031.h>
+
+static const char tps80031_smps_reg[][TPS80031_SMPS_NUM] = {
+ { 0x54, 0x5a, 0x66, 0x42, 0x48 },
+ { 0x56, 0x5c, 0x68, 0x44, 0x4a },
+ { BIT(3), BIT(4), BIT(6), BIT(0), BIT(1) },
+};
+
+static const char tps80031_ldo_reg[][TPS80031_LDO_NUM] = {
+ { 0x9e, 0x86, 0x8e, 0x8a, 0x9a, 0x92, 0xa6, 0x96, 0xa2 },
+ { 0x9f, 0x87, 0x8f, 0x8b, 0x9b, 0x93, 0xa7, 0x97, 0xa3 },
+};
+
+static int tps80031_regulator_enable(struct udevice *dev, int op, bool *enable)
+{
+ struct dm_regulator_uclass_plat *uc_pdata =
+ dev_get_uclass_plat(dev);
+ u32 adr = uc_pdata->ctrl_reg;
+ int ret;
+
+ ret = pmic_reg_read(dev->parent, adr);
+ if (ret < 0)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ if (ret & TPS80031_REGULATOR_MODE_ON)
+ *enable = true;
+ else
+ *enable = false;
+
+ return 0;
+ } else if (op == PMIC_OP_SET) {
+ ret &= ~(TPS80031_REGULATOR_STATUS_MASK);
+
+ if (*enable)
+ ret |= TPS80031_REGULATOR_MODE_ON;
+
+ ret = pmic_reg_write(dev->parent, adr, ret);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tps80031_get_enable(struct udevice *dev)
+{
+ bool enable = false;
+ int ret;
+
+ ret = tps80031_regulator_enable(dev, PMIC_OP_GET, &enable);
+ if (ret)
+ return ret;
+
+ return enable;
+}
+
+static int tps80031_set_enable(struct udevice *dev, bool enable)
+{
+ return tps80031_regulator_enable(dev, PMIC_OP_SET, &enable);
+}
+
+static int tps80031_ldo_volt2hex(int uV)
+{
+ if (uV > TPS80031_LDO_VOLT_MAX)
+ return -EINVAL;
+
+ if (uV < TPS80031_LDO_VOLT_MIN)
+ uV = TPS80031_LDO_VOLT_MIN;
+
+ return DIV_ROUND_UP(uV - TPS80031_LDO_VOLT_BASE, 102000);
+}
+
+static int tps80031_ldo_hex2volt(int hex)
+{
+ if (hex > TPS80031_LDO_VOLT_MAX_HEX)
+ return -EINVAL;
+
+ if (hex < TPS80031_LDO_VOLT_MIN_HEX)
+ hex = TPS80031_LDO_VOLT_MIN_HEX;
+
+ return TPS80031_LDO_VOLT_BASE + hex * 102000;
+}
+
+static int tps80031_ldo_val(struct udevice *dev, int op, int *uV)
+{
+ struct dm_regulator_uclass_plat *uc_pdata =
+ dev_get_uclass_plat(dev);
+ u32 adr = uc_pdata->volt_reg;
+ int hex, ret;
+
+ ret = pmic_reg_read(dev->parent, adr);
+ if (ret < 0)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ *uV = 0;
+
+ ret = tps80031_ldo_hex2volt(ret & TPS80031_LDO_VOLT_MASK);
+ if (ret < 0)
+ return ret;
+
+ *uV = ret;
+ return 0;
+ }
+
+ hex = tps80031_ldo_volt2hex(*uV);
+ if (hex < 0)
+ return hex;
+
+ ret &= ~TPS80031_LDO_VOLT_MASK;
+
+ return pmic_reg_write(dev->parent, adr, ret | hex);
+}
+
+static int tps80031_ldo_probe(struct udevice *dev)
+{
+ struct dm_regulator_uclass_plat *uc_pdata =
+ dev_get_uclass_plat(dev);
+
+ uc_pdata->type = REGULATOR_TYPE_LDO;
+
+ if (dev->driver_data) {
+ u8 idx = dev->driver_data - 1;
+
+ uc_pdata->ctrl_reg = tps80031_ldo_reg[CTRL][idx];
+ uc_pdata->volt_reg = tps80031_ldo_reg[VOLT][idx];
+ } else {
+ /* check for ldoln and ldousb cases */
+ if (!strcmp("ldoln", dev->name)) {
+ uc_pdata->ctrl_reg = tps80031_ldo_reg[CTRL][7];
+ uc_pdata->volt_reg = tps80031_ldo_reg[VOLT][7];
+ } else if (!strcmp("ldousb", dev->name)) {
+ uc_pdata->ctrl_reg = tps80031_ldo_reg[CTRL][8];
+ uc_pdata->volt_reg = tps80031_ldo_reg[VOLT][8];
+ }
+ }
+
+ regulator_autoset(dev);
+
+ return 0;
+}
+
+static int ldo_get_value(struct udevice *dev)
+{
+ int uV;
+ int ret;
+
+ ret = tps80031_ldo_val(dev, PMIC_OP_GET, &uV);
+ if (ret)
+ return ret;
+
+ return uV;
+}
+
+static int ldo_set_value(struct udevice *dev, int uV)
+{
+ return tps80031_ldo_val(dev, PMIC_OP_SET, &uV);
+}
+
+static const struct dm_regulator_ops tps80031_ldo_ops = {
+ .get_value = ldo_get_value,
+ .set_value = ldo_set_value,
+ .get_enable = tps80031_get_enable,
+ .set_enable = tps80031_set_enable,
+};
+
+U_BOOT_DRIVER(tps80031_ldo) = {
+ .name = TPS80031_LDO_DRIVER,
+ .id = UCLASS_REGULATOR,
+ .ops = &tps80031_ldo_ops,
+ .probe = tps80031_ldo_probe,
+};
+
+static int tps80031_smps_volt2hex(u32 base, int uV)
+{
+ if (uV > TPS80031_LDO_VOLT_MAX)
+ return -EINVAL;
+
+ if (uV < base)
+ return 1;
+
+ return DIV_ROUND_UP(uV - base, 12500);
+}
+
+static int tps80031_smps_hex2volt(u32 base, int hex)
+{
+ if (hex > TPS80031_LDO_VOLT_MAX_HEX)
+ return -EINVAL;
+
+ if (!hex)
+ return 0;
+
+ return base + hex * 12500;
+}
+
+static int tps80031_smps_val(struct udevice *dev, int op, int *uV)
+{
+ struct dm_regulator_uclass_plat *uc_pdata =
+ dev_get_uclass_plat(dev);
+ u32 adr = uc_pdata->volt_reg;
+ int base, hex, ret;
+
+ /* If offset flag was set then base voltage is higher */
+ if (uc_pdata->flags & TPS80031_OFFSET_FLAG)
+ base = TPS80031_SMPS_VOLT_BASE_OFFSET;
+ else
+ base = TPS80031_SMPS_VOLT_BASE;
+
+ ret = pmic_reg_read(dev->parent, adr);
+ if (ret < 0)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ *uV = 0;
+
+ ret = tps80031_smps_hex2volt(base, ret & TPS80031_SMPS_VOLT_MASK);
+ if (ret < 0)
+ return ret;
+
+ *uV = ret;
+ return 0;
+ }
+
+ hex = tps80031_smps_volt2hex(base, *uV);
+ if (hex < 0)
+ return hex;
+
+ ret &= ~TPS80031_SMPS_VOLT_MASK;
+
+ return pmic_reg_write(dev->parent, adr, ret | hex);
+}
+
+static int tps80031_smps_probe(struct udevice *dev)
+{
+ struct dm_regulator_uclass_plat *uc_pdata =
+ dev_get_uclass_plat(dev);
+ int idx = dev->driver_data - 1;
+ int ret;
+
+ uc_pdata->type = REGULATOR_TYPE_BUCK;
+
+ uc_pdata->ctrl_reg = tps80031_smps_reg[CTRL][idx];
+ uc_pdata->volt_reg = tps80031_smps_reg[VOLT][idx];
+
+ /* Determine if smps regulator uses higher voltage */
+ ret = pmic_reg_read(dev->parent, TPS80031_SMPS_OFFSET);
+ if (ret & tps80031_smps_reg[OFFSET][idx])
+ uc_pdata->flags |= TPS80031_OFFSET_FLAG;
+
+ regulator_autoset(dev);
+
+ return 0;
+}
+
+static int smps_get_value(struct udevice *dev)
+{
+ int uV;
+ int ret;
+
+ ret = tps80031_smps_val(dev, PMIC_OP_GET, &uV);
+ if (ret)
+ return ret;
+
+ return uV;
+}
+
+static int smps_set_value(struct udevice *dev, int uV)
+{
+ return tps80031_smps_val(dev, PMIC_OP_SET, &uV);
+}
+
+static const struct dm_regulator_ops tps80031_smps_ops = {
+ .get_value = smps_get_value,
+ .set_value = smps_set_value,
+ .get_enable = tps80031_get_enable,
+ .set_enable = tps80031_set_enable,
+};
+
+U_BOOT_DRIVER(tps80031_smps) = {
+ .name = TPS80031_SMPS_DRIVER,
+ .id = UCLASS_REGULATOR,
+ .ops = &tps80031_smps_ops,
+ .probe = tps80031_smps_probe,
+};
--
2.39.2
More information about the U-Boot
mailing list