[PATCH 02/17] xilinx: dts: Fix open drain warning on Zynq, ZynqMP and Versal
Michal Simek
michal.simek at amd.com
Mon Jul 10 14:37:28 CEST 2023
From: Manikanta Guntupalli <manikanta.guntupalli at amd.com>
Fix for below open drain warning on Zynq, ZynqMP and Versal reported by
Linux.
"enforced open drain please flag it properly in DT/ACPI DSDT/board
file."
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---
arch/arm/dts/zynq-zc702.dts | 5 +++--
arch/arm/dts/zynqmp-g-a2197-00-revA.dts | 4 ++--
arch/arm/dts/zynqmp-sck-kr-g-revA.dts | 4 ++--
arch/arm/dts/zynqmp-sck-kr-g-revB.dts | 4 ++--
arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 4 ++--
arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 4 ++--
arch/arm/dts/zynqmp-sm-k26-revA.dts | 4 ++--
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 4 ++--
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 4 ++--
arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 8 ++++----
arch/arm/dts/zynqmp-zcu100-revC.dts | 4 ++--
arch/arm/dts/zynqmp-zcu102-revA.dts | 8 ++++----
arch/arm/dts/zynqmp-zcu104-revA.dts | 4 ++--
arch/arm/dts/zynqmp-zcu104-revC.dts | 4 ++--
arch/arm/dts/zynqmp-zcu106-revA.dts | 8 ++++----
arch/arm/dts/zynqmp-zcu111-revA.dts | 8 ++++----
arch/arm/dts/zynqmp-zcu208-revA.dts | 8 ++++----
arch/arm/dts/zynqmp-zcu216-revA.dts | 8 ++++----
18 files changed, 49 insertions(+), 48 deletions(-)
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 27fb194fc9e2..8d47f24b757b 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -5,6 +5,7 @@
*/
/dts-v1/;
#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Xilinx ZC702 board";
@@ -102,8 +103,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio0 50 0>;
- sda-gpios = <&gpio0 51 0>;
+ scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux at 74 {
compatible = "nxp,pca9548";
diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index b185669b9c5e..11142401151f 100644
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -131,8 +131,8 @@
&i2c0 { /* MIO 34-35 - can't stay here */
status = "okay";
clock-frequency = <400000>;
- scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux at 74 { /* u94 */
compatible = "nxp,pca9548";
#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
index 95347604a27b..5ac66bc1ec5f 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
@@ -68,8 +68,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
u14: ina260 at 40 { /* u14 */
compatible = "ti,ina260";
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
index 26ac540e7b0e..401de9efb913 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
@@ -68,8 +68,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
u14: ina260 at 40 { /* u14 */
compatible = "ti,ina260";
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index 2b6c3946e858..8229244d241a 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -34,8 +34,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
u14: ina260 at 40 { /* u14 */
compatible = "ti,ina260";
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index 308d7876b882..96a51219f425 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -28,8 +28,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
u14: ina260 at 40 { /* u14 */
compatible = "ti,ina260";
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index e9ec4b79fc1f..4b88b57e0c2c 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -267,8 +267,8 @@
status = "okay";
bootph-all;
clock-frequency = <400000>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom at 50 { /* u46 - also at address 0x58 */
bootph-all;
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index b663651583c3..cffad447406b 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -118,8 +118,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom at 55 {
compatible = "atmel,24c64"; /* 24AA64 */
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 9d0cf11665c6..bb0477825a93 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -109,8 +109,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u26: gpio at 20 {
compatible = "ti,tca6416";
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 7f973fcf4da4..74a5b020e863 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -91,8 +91,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c1 {
@@ -100,8 +100,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 116037dbe73f..78c325076006 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -188,8 +188,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
i2c-mux at 75 { /* u11 */
compatible = "nxp,pca9548";
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 8823eb2462e4..79d67c495dee 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -232,8 +232,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio at 20 {
compatible = "ti,tca6416";
@@ -496,8 +496,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux at 74 { /* u34 */
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 92e01ac921e3..90fbfca87f2b 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -139,8 +139,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* Another connection to this bus via PL i2c via PCA9306 - u45 */
i2c-mux at 74 { /* u34 */
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index c61d8b15ee23..69470f8dede3 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -144,8 +144,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio at 20 {
compatible = "ti,tca6416";
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 67775eceaa84..7a8094a16b79 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -232,8 +232,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio at 20 {
compatible = "ti,tca6416";
@@ -495,8 +495,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux at 74 { /* u34 */
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 7fc1aa238a60..c9ff99f8a830 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -204,8 +204,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u22: gpio at 20 {
compatible = "ti,tca6416";
@@ -384,8 +384,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux at 74 { /* u26 */
compatible = "nxp,pca9548";
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
index 1fac632d6317..5ad07d30b8bc 100644
--- a/arch/arm/dts/zynqmp-zcu208-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -231,8 +231,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u15: gpio at 20 { /* u15 */
compatible = "ti,tca6416";
@@ -397,8 +397,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux at 74 {
compatible = "nxp,pca9548"; /* u20 */
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index ea96f5c80141..574e4845be8f 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -241,8 +241,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u15: gpio at 20 { /* u15 */
compatible = "ti,tca6416";
@@ -407,8 +407,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux at 74 {
compatible = "nxp,pca9548"; /* u20 */
--
2.36.1
More information about the U-Boot
mailing list