[PATCH 11/16] board: traverse: ten64: set serial# to be 'label' MAC

[Peng Fan]

On 7/21/2023 12:39 PM, Mathew McBride wrote:
> The GE0 (first Gigabit Ethernet interface) is used as the
> 'serial number' for the board and appliance.
> 
> To ensure the 'true' board S/N is available regardless of how
> the DPAA2 subsystem is configured, use serial# so it is passed in
> the device tree.
> 
> Signed-off-by: Mathew McBride<matt at traverse.com.au>

Reviewed-by: Peng Fan <peng.fan at nxp.com>