[PATCH v2 5/5] optee: Support Rockchip OP-TEE binaries
Kever Yang
kever.yang at rock-chips.com
Wed Jul 19 09:28:37 CEST 2023
Hi Alex,
On 2023/7/18 22:57, Alex Bee wrote:
> Currently the only ARM Rockchip SoC which is supported by upstream
> optee-os is RK322x. For all other ARM SoCs a
> vendor-provided OP-TEE binary has to be used to have a TEE available.
> Those are using a calling convension different from upstream optee-os.
>
> This introduces CONFIG_ROCKCHIP_OPTEE_BINARY which signals that any
> of those vendor binaries is used and changes the calling convension
> accordingly.
>
> Signed-off-by: Alex Bee <knaerzche at gmail.com>
> ---
> arch/arm/mach-rockchip/Kconfig | 8 ++++++++
> common/spl/spl_optee.S | 4 ++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index 17dd43155d..83d8a2a056 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -449,6 +449,14 @@ config ROCKCHIP_BOOT_MODE_REG
> The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
> according to the value from this register.
>
> +config ROCKCHIP_OPTEE_BINARY
> + bool "Use a OP-TEE binary provided by Rockchip"
> + depends on SPL_OPTEE_IMAGE
> + default y if ROCKCHIP_RK3036 || ROCKCHIP_RK3128 || ROCKCHIP_RK3288
This patch is not need for now.
the rk3036 works without OPTEE, and rk3288 is able to use ATF
instead for OPTEE which upstreamed by Heiko.
Thanks,
- Kever
> + help
> + This option enables the usage of vendor-provided OP-TEE binaries.
> + Say Y if you are using OP-TEE binary provided by Rockchip.
> +
> config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
> bool "Disable device boot on power plug-in"
> depends on PMIC_RK8XX
> diff --git a/common/spl/spl_optee.S b/common/spl/spl_optee.S
> index a269904d38..ea41d8adb6 100644
> --- a/common/spl/spl_optee.S
> +++ b/common/spl/spl_optee.S
> @@ -7,6 +7,10 @@
> #include <asm/assembler.h>
>
> ENTRY(spl_optee_entry)
> +#ifdef CONFIG_ROCKCHIP_OPTEE_BINARY
> + ldr r1, =CONFIG_TEXT_BASE
> +#else
> ldr lr, =CONFIG_TEXT_BASE
> +#endif
> mov pc, r3
> ENDPROC(spl_optee_entry)
More information about the U-Boot
mailing list