[PATCH v3 2/2] xilinx: board: Add support to pick bootscr address from DT

[Michal Simek]

From: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>

The bootscript is expected at a default address specific to each
platform.
When high speed memory like Programmable Logic Double Data Rate RAM
(PL DDR RAM) or Higher Bandwidth Memory RAM (HBM) is used the boot.scr
may be loaded at a different offset. The offset needs to be set through
setenv. Due to the default values in some cases the boot.scr is falling
in between the kernel partition.

The bootscript address or the bootscript offset is fetched directly from
the DT and updated in the environment making it easier for automated
flows.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

Changes in v3:
- Rename get_bootscript_address() to ofnode_read_bootscript_address()
  and move it to common location
- Fix alignments

Changes in v2:
- s/bootscr-offset-from-ram-start/bootscr-ram-offset/
- Aligned with https://github.com/devicetree-org/dt-schema/pull/105

 board/xilinx/common/board.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 0328d68e7512..61dd998198e9 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -414,9 +414,25 @@ int board_late_init_xilinx(void)
 
 	if (!IS_ENABLED(CONFIG_MICROBLAZE)) {
 		ulong scriptaddr;
-
-		scriptaddr = env_get_hex("scriptaddr", 0);
-		ret |= env_set_hex("scriptaddr", gd->ram_base + scriptaddr);
+		u64 bootscr_address;
+		u64 bootscr_offset;
+
+		/* Fetch bootscr_address/bootscr_offset from DT and update */
+		if (!ofnode_read_bootscript_address(&bootscr_address,
+						    &bootscr_offset)) {
+			if (bootscr_offset)
+				ret |= env_set_hex("scriptaddr",
+						   gd->ram_base +
+						   bootscr_offset);
+			else
+				ret |= env_set_hex("scriptaddr",
+						   bootscr_address);
+		} else {
+			/* Update scriptaddr(bootscr offset) from env */
+			scriptaddr = env_get_hex("scriptaddr", 0);
+			ret |= env_set_hex("scriptaddr",
+					   gd->ram_base + scriptaddr);
+		}
 	}
 
 	if (IS_ENABLED(CONFIG_ARCH_ZYNQ) || IS_ENABLED(CONFIG_MICROBLAZE))
-- 
2.36.1