[RFC PATCH 3/3] board: ti: am62x: Add am62x_evm defconfig fragments
Jason Kacines
j-kacines at ti.com
Tue Jul 11 23:20:48 CEST 2023
Introduce am62x_evm defconfig fragments that will be used on top of the
base wakeup defconfigs. The usage will be as follows:
make <...> am62x_r5_defconfig am62x_evm_r5.config
make <...> am62x_a53_defconfig am62x_evm_a53.config
This will use the Makefile changes previously mentioned to access the
.config fragments from /board/../
Also remove the original am62x_evm defconfigs now that fragments will be
used to support to the board.
Signed-off-by: Jason Kacines <j-kacines at ti.com>
---
board/ti/am62x/am62x_evm_a53.config | 38 +++++++++
board/ti/am62x/am62x_evm_r5.config | 51 +++++++++++
configs/am62x_evm_a53_defconfig | 104 -----------------------
configs/am62x_evm_r5_defconfig | 127 ----------------------------
4 files changed, 89 insertions(+), 231 deletions(-)
create mode 100644 board/ti/am62x/am62x_evm_a53.config
create mode 100644 board/ti/am62x/am62x_evm_r5.config
delete mode 100644 configs/am62x_evm_a53_defconfig
delete mode 100644 configs/am62x_evm_r5_defconfig
diff --git a/board/ti/am62x/am62x_evm_a53.config b/board/ti/am62x/am62x_evm_a53.config
new file mode 100644
index 0000000000..383bb4597a
--- /dev/null
+++ b/board/ti/am62x/am62x_evm_a53.config
@@ -0,0 +1,38 @@
+# CONFIG_TI_SECURE_DEVICE is not set
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
+CONFIG_SPL_OF_LIST="k3-am625-sk"
+CONFIG_OF_LIST="k3-am625-sk"
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
+CONFIG_SPL_DM_SPI_FLASH=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_CMD_PXE=y
+CONFIG_CMD_DHCP=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
+CONFIG_NET=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_FIXED=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_PHY=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
diff --git a/board/ti/am62x/am62x_evm_r5.config b/board/ti/am62x/am62x_evm_r5.config
new file mode 100644
index 0000000000..5dffab74f6
--- /dev/null
+++ b/board/ti/am62x/am62x_evm_r5.config
@@ -0,0 +1,51 @@
+# CONFIG_TI_SECURE_DEVICE is not set
+CONFIG_SYS_MALLOC_LEN=0x08000000
+CONFIG_SYS_MALLOC_F_LEN=0x9000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_ENV_SIZE=0x20000
+CONFIG_GPIO=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-sk"
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_I2C=y
+CONFIG_INPUT=y
+CONFIG_NET=y
+CONFIG_BOOTDEV_ETH=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_DFU=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_SPL_MISC=y
+CONFIG_ESM_K3=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
deleted file mode 100644
index 7c3bc184cf..0000000000
--- a/configs/am62x_evm_a53_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_K3=y
-CONFIG_TI_SECURE_DEVICE=y
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SOC_K3_AM625=y
-CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
-CONFIG_TARGET_AM625_A53_EVM=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
-CONFIG_SF_DEFAULT_SPEED=25000000
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
-CONFIG_SPL_TEXT_BASE=0x80080000
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_DM_RESET=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL_SIZE_LIMIT=0x40000
-CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; setenv fdtfile ti/${name_fdt}; run distro_bootcmd"
-CONFIG_SPL_MAX_SIZE=0x58000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x80c80000
-CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
-CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
-CONFIG_SPL_DM_MAILBOX=y
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_POWER_DOMAIN=y
-# CONFIG_SPL_SPI_FLASH_TINY is not set
-CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_CMD_MMC=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_SPL_MULTI_DTB_FIT=y
-CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
-CONFIG_CLK_TI_SCI=y
-CONFIG_DMA_CHANNELS=y
-CONFIG_TI_K3_NAVSS_UDMA=y
-CONFIG_TI_SCI_PROTOCOL=y
-CONFIG_DM_MAILBOX=y
-CONFIG_K3_SEC_PROXY=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ADMA=y
-CONFIG_SPL_MMC_SDHCI_ADMA=y
-CONFIG_MMC_SDHCI_AM654=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPI_FLASH_SOFT_RESET=y
-CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_S28HX_T=y
-CONFIG_PHY_TI_DP83867=y
-CONFIG_PHY_FIXED=y
-CONFIG_TI_AM65_CPSW_NUSS=y
-CONFIG_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_TI_SCI_POWER_DOMAIN=y
-CONFIG_K3_SYSTEM_CONTROLLER=y
-CONFIG_REMOTEPROC_TI_K3_ARM64=y
-CONFIG_RESET_TI_SCI=y
-CONFIG_DM_SERIAL=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
-CONFIG_SOC_TI=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CADENCE_QSPI=y
-CONFIG_SYSRESET=y
-CONFIG_SPL_SYSRESET=y
-CONFIG_SYSRESET_TI_SCI=y
-CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
diff --git a/configs/am62x_evm_r5_defconfig b/configs/am62x_evm_r5_defconfig
deleted file mode 100644
index 3c5f367298..0000000000
--- a/configs/am62x_evm_r5_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_K3=y
-CONFIG_TI_SECURE_DEVICE=y
-CONFIG_SYS_MALLOC_LEN=0x08000000
-CONFIG_SYS_MALLOC_F_LEN=0x9000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SOC_K3_AM625=y
-CONFIG_TARGET_AM625_R5_EVM=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43c3a7f0
-CONFIG_SF_DEFAULT_SPEED=25000000
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_ENV_SIZE=0x20000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-sk"
-CONFIG_SPL_TEXT_BASE=0x43c00000
-CONFIG_DM_RESET=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x7000
-CONFIG_SPL_SIZE_LIMIT=0x3A7F0
-CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
-CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
-CONFIG_SPL_MAX_SIZE=0x3B000
-CONFIG_SPL_PAD_TO=0x0
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x43c3b000
-CONFIG_SPL_BSS_MAX_SIZE=0x3000
-CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
-CONFIG_SPL_EARLY_BSS=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
-CONFIG_SPL_DM_MAILBOX=y
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_DM_RESET=y
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_REMOTEPROC=y
-# CONFIG_SPL_SPI_FLASH_TINY is not set
-CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_REMOTEPROC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_SPL_MULTI_DTB_FIT=y
-CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
-CONFIG_SPL_CLK_CCF=y
-CONFIG_SPL_CLK_K3_PLL=y
-CONFIG_SPL_CLK_K3=y
-CONFIG_TI_SCI_PROTOCOL=y
-CONFIG_DA8XX_GPIO=y
-CONFIG_DM_MAILBOX=y
-CONFIG_K3_SEC_PROXY=y
-CONFIG_SPL_MISC=y
-CONFIG_ESM_K3=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ADMA=y
-CONFIG_SPL_MMC_SDHCI_ADMA=y
-CONFIG_MMC_SDHCI_AM654=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPI_FLASH_SOFT_RESET=y
-CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_S28HX_T=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_GENERIC is not set
-CONFIG_SPL_PINCTRL=y
-# CONFIG_SPL_PINCTRL_GENERIC is not set
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_TI_POWER_DOMAIN=y
-CONFIG_K3_SYSTEM_CONTROLLER=y
-CONFIG_REMOTEPROC_TI_K3_ARM64=y
-CONFIG_RESET_TI_SCI=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
-CONFIG_SOC_TI=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CADENCE_QSPI=y
-CONFIG_TIMER=y
-CONFIG_SPL_TIMER=y
-CONFIG_OMAP_TIMER=y
-CONFIG_LIB_RATIONAL=y
-CONFIG_SPL_LIB_RATIONAL=y
--
2.34.1
More information about the U-Boot
mailing list