[PATCH 6/6] board: phytec: phycore_imx8mp: Add 4000MTS RAM timings based on PCB rev

[Teresa Remmet]

Starting with PCB revision 3 we can safely make use of higher RAM
frequency again. Make use of the EEPROM detection to determine the
revision and use the updated RAM timings for new SoMs.

Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
---
 board/phytec/phycore_imx8mp/spl.c | 61 +++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c
index e084fe081987..2929c3c50001 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -48,6 +48,67 @@ void spl_dram_init(void)
 
 	phytec_print_som_info(NULL);
 
+	ret = phytec_get_rev(NULL);
+	if (ret >= 3 && ret != PHYTEC_EEPROM_INVAL) {
+		dram_timing.ddrc_cfg[3].val = 0x1233;
+		dram_timing.ddrc_cfg[4].val = 0x1e84800;
+		dram_timing.ddrc_cfg[5].val = 0x7a0118;
+		dram_timing.ddrc_cfg[8].val = 0xc00307a3;
+		dram_timing.ddrc_cfg[9].val = 0xc50000;
+		dram_timing.ddrc_cfg[10].val = 0xf4003f;
+		dram_timing.ddrc_cfg[11].val = 0xf30000;
+		dram_timing.ddrc_cfg[14].val = 0x2028222a;
+		dram_timing.ddrc_cfg[15].val = 0x8083f;
+		dram_timing.ddrc_cfg[16].val = 0xe0e000;
+		dram_timing.ddrc_cfg[17].val = 0x12040a12;
+		dram_timing.ddrc_cfg[18].val = 0x2050f0f;
+		dram_timing.ddrc_cfg[19].val = 0x1010009;
+		dram_timing.ddrc_cfg[20].val = 0x502;
+		dram_timing.ddrc_cfg[21].val = 0x20800;
+		dram_timing.ddrc_cfg[22].val = 0xe100002;
+		dram_timing.ddrc_cfg[23].val = 0x120;
+		dram_timing.ddrc_cfg[24].val = 0xc80064;
+		dram_timing.ddrc_cfg[25].val = 0x3e8001e;
+		dram_timing.ddrc_cfg[26].val = 0x3207a12;
+		dram_timing.ddrc_cfg[28].val = 0x4a3820e;
+		dram_timing.ddrc_cfg[30].val = 0x230e;
+		dram_timing.ddrc_cfg[37].val = 0x799;
+		dram_timing.ddrc_cfg[38].val = 0x9141d1c;
+		dram_timing.ddrc_cfg[74].val = 0x302;
+		dram_timing.ddrc_cfg[83].val = 0x599;
+		dram_timing.ddrc_cfg[99].val = 0x302;
+		dram_timing.ddrc_cfg[108].val = 0x599;
+		dram_timing.ddrphy_cfg[66].val = 0x18;
+		dram_timing.ddrphy_cfg[75].val = 0x1e3;
+		dram_timing.ddrphy_cfg[77].val = 0x1e3;
+		dram_timing.ddrphy_cfg[79].val = 0x1e3;
+		dram_timing.ddrphy_cfg[145].val = 0x3e8;
+		dram_timing.fsp_msg[0].drate = 4000;
+		dram_timing.fsp_msg[0].fsp_cfg[1].val = 0xfa0;
+		dram_timing.fsp_msg[0].fsp_cfg[10].val = 0x3ff4;
+		dram_timing.fsp_msg[0].fsp_cfg[11].val = 0xf3;
+		dram_timing.fsp_msg[0].fsp_cfg[15].val = 0x3ff4;
+		dram_timing.fsp_msg[0].fsp_cfg[16].val = 0xf3;
+		dram_timing.fsp_msg[0].fsp_cfg[22].val = 0xf400;
+		dram_timing.fsp_msg[0].fsp_cfg[23].val = 0xf33f;
+		dram_timing.fsp_msg[0].fsp_cfg[28].val = 0xf400;
+		dram_timing.fsp_msg[0].fsp_cfg[29].val = 0xf33f;
+		dram_timing.fsp_msg[3].drate = 4000;
+		dram_timing.fsp_msg[3].fsp_cfg[1].val = 0xbb8;
+		dram_timing.fsp_msg[3].fsp_cfg[11].val = 0x3ff4;
+		dram_timing.fsp_msg[3].fsp_cfg[12].val = 0xf3;
+		dram_timing.fsp_msg[3].fsp_cfg[16].val = 0x3ff4;
+		dram_timing.fsp_msg[3].fsp_cfg[17].val = 0xf3;
+		dram_timing.fsp_msg[3].fsp_cfg[23].val = 0xf400;
+		dram_timing.fsp_msg[3].fsp_cfg[24].val = 0xf33f;
+		dram_timing.fsp_msg[3].fsp_cfg[29].val = 0xf400;
+		dram_timing.fsp_msg[3].fsp_cfg[30].val = 0xf33f;
+		dram_timing.ddrphy_pie[480].val = 0x465;
+		dram_timing.ddrphy_pie[481].val = 0xfa;
+		dram_timing.ddrphy_pie[482].val = 0x9c4;
+		dram_timing.fsp_table[0] = 4000;
+	}
+
 out:
 	ddr_init(&dram_timing);
 }
-- 
2.34.1