[PATCH 3/4] rockchip: rk356x-u-boot: Add bootph-all to common pinctrl nodes

[Jonas Karlman]

Add bootph-all prop to common pinctrl nodes for eMMC, FSPI, SD-card and
UART2 that are typically used by multiple boards. Unreferenced nodes are
removed from the SPL device tree during a normal build.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi | 56 -----------------
 arch/arm/dts/rk3568-rock-3a-u-boot.dtsi      | 54 -----------------
 arch/arm/dts/rk356x-u-boot.dtsi              | 64 ++++++++++++++++++++
 3 files changed, 64 insertions(+), 110 deletions(-)

diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
index 57b77151c57c..c925439f71cd 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
@@ -11,67 +11,11 @@
 	};
 };
 
-&emmc_bus8 {
-	bootph-all;
-};
-
-&emmc_clk {
-	bootph-all;
-};
-
-&emmc_cmd {
-	bootph-all;
-};
-
-&emmc_datastrobe {
-	bootph-all;
-};
-
-&pinctrl {
-	bootph-all;
-};
-
-&pcfg_pull_none {
-	bootph-all;
-};
-
-&pcfg_pull_up_drv_level_2 {
-	bootph-all;
-};
-
-&pcfg_pull_up {
-	bootph-all;
-};
-
-&sdmmc0_bus4 {
-	bootph-all;
-};
-
-&sdmmc0_clk {
-	bootph-all;
-};
-
-&sdmmc0_cmd {
-	bootph-all;
-};
-
-&sdmmc0_det {
-	bootph-all;
-};
-
-&sdmmc0_pwren {
-	bootph-all;
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 };
 
-&uart2m0_xfer {
-	bootph-all;
-};
-
 &uart2 {
 	clock-frequency = <24000000>;
 	bootph-all;
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
index 0ba38851c25e..45e9390f202d 100644
--- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
@@ -16,26 +16,6 @@
 	};
 };
 
-&emmc_bus8 {
-	bootph-all;
-};
-
-&emmc_clk {
-	bootph-all;
-};
-
-&emmc_cmd {
-	bootph-all;
-};
-
-&emmc_datastrobe {
-	bootph-all;
-};
-
-&fspi_pins {
-	bootph-all;
-};
-
 &pcie2x1 {
 	pinctrl-0 = <&pcie20m1_pins &pcie_reset_h>;
 	/* Shared vpcie3v3-supply may cause a sys freeze, disable for now */
@@ -47,8 +27,6 @@
 };
 
 &pinctrl {
-	bootph-all;
-
 	pcie {
 		pcie3x2_reset_h: pcie3x2-reset-h {
 			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -56,34 +34,6 @@
 	};
 };
 
-&pcfg_pull_none {
-	bootph-all;
-};
-
-&pcfg_pull_up_drv_level_2 {
-	bootph-all;
-};
-
-&pcfg_pull_up {
-	bootph-all;
-};
-
-&sdmmc0_bus4 {
-	bootph-all;
-};
-
-&sdmmc0_clk {
-	bootph-all;
-};
-
-&sdmmc0_cmd {
-	bootph-all;
-};
-
-&sdmmc0_det {
-	bootph-all;
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -117,10 +67,6 @@
 	status = "disabled";
 };
 
-&uart2m0_xfer {
-	bootph-all;
-};
-
 &uart2 {
 	clock-frequency = <24000000>;
 	bootph-all;
diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
index c340c2bba6ff..89c0d830b632 100644
--- a/arch/arm/dts/rk356x-u-boot.dtsi
+++ b/arch/arm/dts/rk356x-u-boot.dtsi
@@ -59,6 +59,70 @@
 	status = "okay";
 };
 
+&pinctrl {
+	bootph-all;
+};
+
+&pcfg_pull_none {
+	bootph-all;
+};
+
+&pcfg_pull_up_drv_level_2 {
+	bootph-all;
+};
+
+&pcfg_pull_up {
+	bootph-all;
+};
+
+&emmc_bus8 {
+	bootph-all;
+};
+
+&emmc_clk {
+	bootph-all;
+};
+
+&emmc_cmd {
+	bootph-all;
+};
+
+&emmc_datastrobe {
+	bootph-all;
+};
+
+&emmc_rstnout {
+	bootph-all;
+};
+
+&fspi_pins {
+	bootph-all;
+};
+
+&sdmmc0_bus4 {
+	bootph-all;
+};
+
+&sdmmc0_clk {
+	bootph-all;
+};
+
+&sdmmc0_cmd {
+	bootph-all;
+};
+
+&sdmmc0_det {
+	bootph-all;
+};
+
+&sdmmc0_pwren {
+	bootph-all;
+};
+
+&uart2m0_xfer {
+	bootph-all;
+};
+
 &sdhci {
 	bootph-pre-ram;
 	status = "okay";
-- 
2.41.0