[PATCH v3 2/9] pci: pcie_dw_rockchip: Get config region from reg prop

Jonas Karlman jonas at kwiboo.se
Tue Jul 18 09:55:37 CEST 2023


Get the config region to use from the reg prop. Also update the
referenced region index used in comment.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v3:
- No change

v2:
- Use dev_read_addr_size_index_ptr
- Collect r-b tag

 drivers/pci/pcie_dw_common.c   | 10 ++++++----
 drivers/pci/pcie_dw_rockchip.c |  7 +++++++
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie_dw_common.c b/drivers/pci/pcie_dw_common.c
index 9f8b016d1149..74fb6df412c7 100644
--- a/drivers/pci/pcie_dw_common.c
+++ b/drivers/pci/pcie_dw_common.c
@@ -141,9 +141,9 @@ static uintptr_t set_cfg_address(struct pcie_dw *pcie,
 
 	/*
 	 * Not accessing root port configuration space?
-	 * Region #0 is used for Outbound CFG space access.
+	 * Region #1 is used for Outbound CFG space access.
 	 * Direction = Outbound
-	 * Region Index = 0
+	 * Region Index = 1
 	 */
 	d = PCI_MASK_BUS(d);
 	d = PCI_ADD_BUS(bus, d);
@@ -328,8 +328,10 @@ void pcie_dw_setup_host(struct pcie_dw *pci)
 			pci->prefetch.bus_start = hose->regions[ret].bus_start;  /* PREFETCH_bus_addr */
 			pci->prefetch.size = hose->regions[ret].size;	    /* PREFETCH size */
 		} else if (hose->regions[ret].flags == PCI_REGION_SYS_MEMORY) {
-			pci->cfg_base = (void *)(pci->io.phys_start - pci->io.size);
-			pci->cfg_size = pci->io.size;
+			if (!pci->cfg_base) {
+				pci->cfg_base = (void *)(pci->io.phys_start - pci->io.size);
+				pci->cfg_size = pci->io.size;
+			}
 		} else {
 			dev_err(pci->dev, "invalid flags type!\n");
 		}
diff --git a/drivers/pci/pcie_dw_rockchip.c b/drivers/pci/pcie_dw_rockchip.c
index 6da618055cbe..83737e62bc6a 100644
--- a/drivers/pci/pcie_dw_rockchip.c
+++ b/drivers/pci/pcie_dw_rockchip.c
@@ -366,6 +366,13 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
 
 	dev_dbg(dev, "APB address is 0x%p\n", priv->apb_base);
 
+	priv->dw.cfg_base = dev_read_addr_size_index_ptr(dev, 2,
+							 &priv->dw.cfg_size);
+	if (!priv->dw.cfg_base)
+		return -EINVAL;
+
+	dev_dbg(dev, "CFG address is 0x%p\n", priv->dw.cfg_base);
+
 	ret = gpio_request_by_name(dev, "reset-gpios", 0,
 				   &priv->rst_gpio, GPIOD_IS_OUT);
 	if (ret) {
-- 
2.41.0



More information about the U-Boot mailing list