[PATCH v2] xilinx: board: Add support to pick bootscr address from DT

[Michal Simek]

From: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>

The bootscript is expected at a default address specific to each
platform.
When high speed memory like Programmable Logic Double Data Rate RAM
(PL DDR RAM) or Higher Bandwidth Memory RAM (HBM) is used the boot.scr
may be loaded at a different offset. The offset needs to be set through
setenv. Due to the default values in some cases the boot.scr is falling
in between the kernel partition.

The bootscript address or the bootscript offset is fetched directly from
the DT and updated in the environment making it easier for automated
flows.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

Changes in v2:
- s/bootscr-offset-from-ram-start/bootscr-ram-offset/
- Aligned with https://github.com/devicetree-org/dt-schema/pull/105

 board/xilinx/common/board.c | 43 ++++++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 0328d68e7512..53c4264e794c 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -405,6 +405,31 @@ static int env_set_by_index(const char *name, int index, char *data)
 	return env_set(var, data);
 }
 
+static int get_bootscript_address(u64 *bootscr_address, u64 *bootscr_offset)
+{
+	int ret;
+	ofnode uboot;
+
+	*bootscr_address = 0;
+	*bootscr_offset = 0;
+
+	uboot = ofnode_path("/options/u-boot");
+	if (!ofnode_valid(uboot)) {
+		printf("%s: Missing /u-boot node\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = ofnode_read_u64(uboot, "bootscr-address", bootscr_address);
+	if (ret) {
+		ret = ofnode_read_u64(uboot, "bootscr-ram-offset",
+				      bootscr_offset);
+		if (ret)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int board_late_init_xilinx(void)
 {
 	u32 ret = 0;
@@ -414,9 +439,21 @@ int board_late_init_xilinx(void)
 
 	if (!IS_ENABLED(CONFIG_MICROBLAZE)) {
 		ulong scriptaddr;
-
-		scriptaddr = env_get_hex("scriptaddr", 0);
-		ret |= env_set_hex("scriptaddr", gd->ram_base + scriptaddr);
+		u64 bootscr_address;
+		u64 bootscr_offset;
+
+		/* Fetch bootscr_address/bootscr_offset from DT and update */
+		if (!get_bootscript_address(&bootscr_address, &bootscr_offset)) {
+			if (bootscr_offset)
+				ret |= env_set_hex("scriptaddr",
+						   gd->ram_base + bootscr_offset);
+			else
+				ret |= env_set_hex("scriptaddr", bootscr_address);
+		} else {
+			/* Update scriptaddr(bootscr offset) from env */
+			scriptaddr = env_get_hex("scriptaddr", 0);
+			ret |= env_set_hex("scriptaddr", gd->ram_base + scriptaddr);
+		}
 	}
 
 	if (IS_ENABLED(CONFIG_ARCH_ZYNQ) || IS_ENABLED(CONFIG_MICROBLAZE))
-- 
2.36.1