[PATCH] arm: mxs: Clear CPSR V bit to activate low vectors
Lukasz Majewski
lukma at denx.de
Mon Jul 31 10:06:15 CEST 2023
On Sat, 29 Jul 2023 15:30:10 +0200
Marek Vasut <marex at denx.de> wrote:
> The MXS starts with CPSR V bit set, which makes the CPU jump to high
> vectors in case of an exception. Those high vectors are located at
> 0xffff0000, which is where the BootROM exception table is located as
> well. U-Boot should handle exceptions on its own using its own
> exception handling code, which is located at 0x0, i.e. at low
> vectors. Clear the CPSR V bit, so that the CPU would jump to low
> vectors on exception instead, and therefore run the U-Boot exception
> handling code.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Lukasz Majewski <lukma at denx.de>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 3 +++
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 4 ++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c
> b/arch/arm/cpu/arm926ejs/mxs/mxs.c index 4d21e3df76e..d64a8328b04
> 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
> +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
> @@ -85,6 +85,9 @@ void mx28_fixup_vt(uint32_t start_addr)
> /* cppcheck-suppress nullPointer */
> vt[i + 8] = start_addr + (4 * i);
> }
> +
> + /* Make sure ARM core points to low vectors */
> + set_cr(get_cr() & ~CR_V);
> }
>
> #ifdef CONFIG_ARCH_MISC_INIT
> diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
> b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index
> 5598c552ab9..4a7dfc6a2ae 100644 ---
> a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++
> b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -17,6 +17,7 @@
> #include <asm/arch/sys_proto.h>
> #include <asm/gpio.h>
> #include <asm/sections.h>
> +#include <asm/system.h>
> #include <linux/compiler.h>
>
> #include "mxs_init.h"
> @@ -104,6 +105,9 @@ static void mxs_spl_fixup_vectors(void)
>
> /* cppcheck-suppress nullPointer */
> memcpy(0x0, &_start, 0x60);
> +
> + /* Make sure ARM core points to low vectors */
> + set_cr(get_cr() & ~CR_V);
> }
>
> static void mxs_spl_console_init(void)
Reviewed-by: Lukasz Majewski <lukma at denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230731/b570fe64/attachment.sig>
More information about the U-Boot
mailing list