[PATCH v4 32/45] fs: fat: Support reading from a larger block size

[Simon Glass]

Hi Bin,

On Wed, 19 Jul 2023 at 01:58, Bin Meng <bmeng.cn at gmail.com> wrote:
>
> Hi Simon,
>
> On Wed, Jul 19, 2023 at 9:11 AM Simon Glass <sjg at chromium.org> wrote:
> >
> > Hi Bin,
> >
> > On Sun, 16 Jul 2023 at 09:19, Bin Meng <bmeng.cn at gmail.com> wrote:
> > >
> > > Hi Simon,
> > >
> > > On Sun, Jul 16, 2023 at 7:42 AM Simon Glass <sjg at chromium.org> wrote:
> > > >
> > > > Hi Bin,
> > > >
> > > > On Thu, 13 Jul 2023 at 04:49, Bin Meng <bmeng.cn at gmail.com> wrote:
> > > > >
> > > > > Hi Simon,
> > > > >
> > > > > On Mon, Jun 19, 2023 at 8:02 PM Simon Glass <sjg at chromium.org> wrote:
> > > > > >
> > > > > > At present it is not possible to read from some CDROM drives since the
> > > > > > FAT sector size does not match the media's block size. Add a conversion
> > > > > > option for this, so that reading is possible.
> > > > >
> > > > > I am completely confused. The CDROM uses iso9660 file system. This has
> > > > > nothing to do with FAT.
> > > >
> > > > It actually can use both - this is the -cdrom option in QEMU which can
> > > > emulate an old-style CDROM, with a FAT filesystem on it!
> > > >
> > >
> > > What QEMU command line is this to enable a CDROM with FAT file system?
> > >
> > > If that is the case, what you changed in this commit only works with
> > > QEMU, not with any real-world devices, I believe?
> > >
> > > Could you use iso9660 instead?
> >
> > Sure, but the image I am using has an MSDOS partition name, an EFI
> > partition table, a FAT filesystem and an ISO9660 filesystem! I was
> > trying to look at the FAT filesystem via the MSDOS partition table.
> >
>
> Is that a released installer iso that I can download somewhere?
>
> Which QEMU command line should I use for reproducing the issue?

Here is what I did:

qemu-system-x86_64 -m 2G  -smp 4 -bios /tmp/b/qemu-x86/u-boot.rom
-cdrom /vid/software/linux/debian/debian-11.5.0-i386-DVD-1.iso -serial
mon:stdio
=> part set ide 2 iso

Partition Map for IDE device 2  --   Partition Type: ISO

Part   Start     Sect x Size Type
  1     6912        1   2048 U-Boot
  2     5912     1000   2048 U-Boot
=> ls ide 2:2
FAT sector size mismatch (fs=512, dev=2048): translating for read-only
            efi/
      160   ubootefi.var

1 file(s), 1 dir(s)

=>

Without this patch we cannot enable translation and it is not possible
to read the files.

Regards,
Simon