[PATCH v3 1/5] drivers: watchdog: add mcf watchdog support
Stefan Roese
sr at denx.de
Mon Jul 24 09:40:57 CEST 2023
On 7/24/23 08:49, Angelo Dureghello wrote:
> This watchdog driver applies to the following
> mcf families:
>
> - mcf52x2 (5271 5275 5282)
> - mcf532x (5329 5373)
> - mcf523x (5235)
>
> Cpu's not listed for each family does not have WDT module.
>
> Note, after some attempts testing by qemu on 5208 i
> finally abandoned, watchdog seems not implemented properly.
>
> The driver has been tested in a real M5282EVM.
>
> Signed-off-by: Angelo Dureghello <angelo at kernel-space.org>
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> ---
> Changes for v2:
> - remove unnecessary hardcoded timeouts
> - remove unnecessary hw_watchdog_xxx stuff
> - rewrite wdog module reg calculation
> - using IS_ENABLED() where possible
> Changes for v3:
> - remove hardcoded 4s test
> ---
> drivers/watchdog/Kconfig | 7 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/mcf_wdt.c | 135 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 143 insertions(+)
> create mode 100644 drivers/watchdog/mcf_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 646663528a..07fc4940e9 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -178,6 +178,13 @@ config WDT_MAX6370
> help
> Select this to enable max6370 watchdog timer.
>
> +config WDT_MCF
> + bool "ColdFire family watchdog timer support"
> + depends on WDT
> + help
> + Select this to enable ColdFire watchdog timer,
> + which supports mcf52x2 mcf532x mcf523x families.
> +
> config WDT_MESON_GXBB
> bool "Amlogic watchdog timer support"
> depends on WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index fd5d9c7376..eef786f5e7 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
> obj-$(CONFIG_WDT_FTWDT010) += ftwdt010_wdt.o
> obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o
> obj-$(CONFIG_WDT_MAX6370) += max6370_wdt.o
> +obj-$(CONFIG_WDT_MCF) += mcf_wdt.o
> obj-$(CONFIG_WDT_MESON_GXBB) += meson_gxbb_wdt.o
> obj-$(CONFIG_WDT_MPC8xxx) += mpc8xxx_wdt.o
> obj-$(CONFIG_WDT_MT7620) += mt7620_wdt.o
> diff --git a/drivers/watchdog/mcf_wdt.c b/drivers/watchdog/mcf_wdt.c
> new file mode 100644
> index 0000000000..b36488bb5b
> --- /dev/null
> +++ b/drivers/watchdog/mcf_wdt.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * mcf_wdt.c - driver for ColdFire on-chip watchdog
> + *
> + * Author: Angelo Dureghello <angelo at kernel-space.org>
> + *
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <hang.h>
> +#include <asm/io.h>
> +#include <wdt.h>
> +#include <linux/bitops.h>
> +
> +#define DIVIDER_5XXX 4096
> +#define DIVIDER_5282 8192
> +
> +#define WCR_EN BIT(0)
> +#define WCR_HALTED BIT(1)
> +#define WCR_DOZE BIT(2)
> +#define WCR_WAIT BIT(3)
> +
> +struct watchdog_regs {
> + u16 wcr; /* Control */
> + u16 wmr; /* Service */
> + u16 wcntr; /* Counter */
> + u16 wsr; /* Reset Status */
> +};
> +
> +static void mcf_watchdog_reset(struct watchdog_regs *wdog)
> +{
> + if (!IS_ENABLED(CONFIG_WATCHDOG_RESET_DISABLE)) {
> + writew(0x5555, &wdog->wsr);
> + writew(0xaaaa, &wdog->wsr);
> + }
> +}
> +
> +static void mcf_watchdog_init(struct watchdog_regs *wdog, u32 fixed_divider,
> + u64 timeout_msecs)
> +{
> + u32 wdog_module, cycles_per_sec;
> +
> + cycles_per_sec = CFG_SYS_CLK / fixed_divider;
> +
> + wdog_module = cycles_per_sec * ((u32)timeout_msecs / 1000);
> + wdog_module += (cycles_per_sec / 1000) * ((u32)timeout_msecs % 1000);
> +
> + /* Limit check, max 16 bits */
> + if (wdog_module > 0xffff)
> + wdog_module = 0xffff;
> +
> + /* Set timeout and enable watchdog */
> + writew((u16)wdog_module, &wdog->wmr);
> + writew(WCR_EN, &wdog->wcr);
> +
> + mcf_watchdog_reset(wdog);
> +}
> +
> +struct mcf_wdt_priv {
> + void __iomem *base;
> + u32 fixed_divider;
> +};
> +
> +static int mcf_wdt_expire_now(struct udevice *dev, ulong flags)
> +{
> + hang();
> +
> + return 0;
> +}
> +
> +static int mcf_wdt_reset(struct udevice *dev)
> +{
> + struct mcf_wdt_priv *priv = dev_get_priv(dev);
> +
> + mcf_watchdog_reset(priv->base);
> +
> + return 0;
> +}
> +
> +static int mcf_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
> +{
> + struct mcf_wdt_priv *priv = dev_get_priv(dev);
> +
> + /* Timeout from fdt (timeout) comes in milliseconds */
> + mcf_watchdog_init(priv->base, priv->fixed_divider, timeout);
> +
> + return 0;
> +}
> +
> +static int mcf_wdt_stop(struct udevice *dev)
> +{
> + struct mcf_wdt_priv *priv = dev_get_priv(dev);
> + struct watchdog_regs *wdog = (struct watchdog_regs *)priv->base;
> +
> + setbits_be16(&wdog->wcr, WCR_HALTED);
> +
> + return 0;
> +}
> +
> +static int mcf_wdt_probe(struct udevice *dev)
> +{
> + struct mcf_wdt_priv *priv = dev_get_priv(dev);
> +
> + priv->base = dev_read_addr_ptr(dev);
> + if (!priv->base)
> + return -ENOENT;
> +
> + priv->fixed_divider = (u32)dev_get_driver_data(dev);
> +
> + return 0;
> +}
> +
> +static const struct wdt_ops mcf_wdt_ops = {
> + .start = mcf_wdt_start,
> + .stop = mcf_wdt_stop,
> + .reset = mcf_wdt_reset,
> + .expire_now = mcf_wdt_expire_now,
> +};
> +
> +static const struct udevice_id mcf_wdt_ids[] = {
> + { .compatible = "fsl,mcf5208-wdt", .data = DIVIDER_5XXX },
> + { .compatible = "fsl,mcf5282-wdt", .data = DIVIDER_5282 },
> + {}
> +};
> +
> +U_BOOT_DRIVER(mcf_wdt) = {
> + .name = "mcf_wdt",
> + .id = UCLASS_WDT,
> + .of_match = mcf_wdt_ids,
> + .probe = mcf_wdt_probe,
> + .ops = &mcf_wdt_ops,
> + .priv_auto = sizeof(struct mcf_wdt_priv),
> + .flags = DM_FLAG_PRE_RELOC,
> +};
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list