[PATCH v2 2/9] cmd: boot: implement PMIC based poweroff

Svyatoslav Ryhel clamor95 at gmail.com
Sun Jul 23 11:00:42 CEST 2023


нд, 23 лип. 2023 р. о 06:48 Simon Glass <sjg at chromium.org> пише:
>
> Hi Svyatoslav,
>
> On Thu, 20 Jul 2023 at 02:48, Svyatoslav Ryhel <clamor95 at gmail.com> wrote:
> >
> > Use new PMIC ops to perform device poweroff.
> >
> > Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
> > ---
> >  cmd/Kconfig |  6 ++++++
> >  cmd/boot.c  | 40 ++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 46 insertions(+)
> >
> > diff --git a/cmd/Kconfig b/cmd/Kconfig
> > index ecfd575237..47654297f8 100644
> > --- a/cmd/Kconfig
> > +++ b/cmd/Kconfig
> > @@ -1439,6 +1439,12 @@ config CMD_POWEROFF
> >         help
> >           Poweroff/Shutdown the system
> >
> > +config CMD_PMIC_POWEROFF
> > +       bool "PMIC poweroff"
> > +       select CMD_POWEROFF
> > +       help
> > +         Shutdown the system using PMIC poweroff sequence.
> > +
> >  config CMD_READ
> >         bool "read - Read binary data from a partition"
> >         help
> > diff --git a/cmd/boot.c b/cmd/boot.c
> > index 14839c1ced..4270034194 100644
> > --- a/cmd/boot.c
> > +++ b/cmd/boot.c
> > @@ -9,7 +9,13 @@
> >   */
> >  #include <common.h>
> >  #include <command.h>
> > +#include <dm.h>
> > +#include <log.h>
> >  #include <net.h>
> > +#include <dm/device-internal.h>
> > +#include <dm/uclass-internal.h>
> > +#include <power/pmic.h>
> > +#include <linux/delay.h>
> >
> >  #ifdef CONFIG_CMD_GO
> >
> > @@ -64,6 +70,40 @@ U_BOOT_CMD(
> >  );
> >
> >  #ifdef CONFIG_CMD_POWEROFF
> > +#ifdef CONFIG_CMD_PMIC_POWEROFF
> > +int do_poweroff(struct cmd_tbl *cmdtp, int flag,
> > +               int argc, char *const argv[])
> > +{
> > +       struct uc_pmic_priv *pmic_priv;
> > +       struct udevice *dev;
> > +       int ret;
> > +
> > +       for (uclass_find_first_device(UCLASS_PMIC, &dev);
> > +            dev;
> > +            uclass_find_next_device(&dev)) {
> > +               if (dev && !device_active(dev)) {
> > +                       ret = device_probe(dev);
> > +                       if (ret)
> > +                               return ret;
> > +               }
> > +
> > +               /* value we need to check is set after probe */
> > +               pmic_priv = dev_get_uclass_priv(dev);
> > +               if (pmic_priv->sys_pow_ctrl) {
> > +                       ret = pmic_poweroff(dev);
> > +
> > +                       /* wait some time and then print error */
> > +                       mdelay(5000);
> > +                       log_err("Failed to power off!!!\n");
> > +                       return ret;
> > +               }
> > +       }
> > +
> > +       /* no device should reach here */
> > +       return 1;
> > +}
> > +#endif
> > +
> >  U_BOOT_CMD(
> >         poweroff, 1, 0, do_poweroff,
> >         "Perform POWEROFF of the device",
> > --
> > 2.39.2
> >
>
> How does this relate to sysreset_walk(SYSRESET_POWER_OFF) and
> do_poweroff() in cmd/boot.c?
>

Yes, it seems that I have misunderstood you, but non the less, you say
that I have to implement a new separate pmic subdriver just to support
poweroff?

> Regards,
> Simon


More information about the U-Boot mailing list